Long‐term water uptake behavior of natural fiber/polypropylene composites

Composites of different natural fibers and polypropylene were prepared and their long‐term water absorption behaviors were studied. Wood flour, rice hulls, newsprint fibers, and kenaf fibers (at 25 and 50% by weight contents) were mixed with polypropylene and 1 and 2% compatibilizer, respectively. Water absorption tests were carried out on injection‐molded specimens at room temperature for 5 weeks. Measurements were made every week and water absorption was calculated. Water diffusion coefficients were also calculated by evaluating the water absorption isotherms. Results indicated a significant difference among different natural fibers, with kenaf fibers and newsprint fibers exhibiting the highest and wood flour and rice hulls the lowest water absorption values, respectively. The difference between 25 and 50% fiber contents for all composite formulations increased at longer immersion times. Water diffusion coefficients of the composites were found to be about 3 orders of magnitude higher than that of pure PP. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.     

PRIVACY LEAKAGE IN HEALTH SOCIAL NETWORKS

Members of health social networks may be susceptible to privacy leaks by the amount of information they leave behind. The threat to privacy increases when members of these networks reuse their pseudonyms in other social networks. The risk of re‐identifying users from such networks requires quantitative estimates to evaluate its magnitude. The estimates will enable managers and members of health social communities to take corrective measures. We introduce a new re‐identification attack, the social network attack, that takes advantage of the fact that users reuse their pseudonyms. To demonstrate the attack, we establish links between MedHelp and Twitter (two popular social networks) based on matching pseudonyms. We used Bayesian networks to model the re‐identification risk and used stylometric techniques to identify the strength of the links. On the basis of our model 7‐11. 8% of the MedHelp members in the sample population who reused their pseudonyms in Twitter were re‐identifiable compared with 1% who did not. The risk estimates were measured at the 5% risk threshold. Our model was able to re‐identify users with a sensitivity of 41% and specificity of 96%. The potential for re‐identification increases as more data is accumulated from these profiles, which makes the threat of re‐identification more serious.     

PGSW-OS: a novel approach for resource management in a semantic web operating system based on a P2P grid architecture

A web operating system is an operating system that users can access from any hardware at any location. A peer-to-peer (P2P) grid uses P2P communication for resource management and communication between nodes in a grid and manages resources locally in each cluster, and this provides a proper architecture for a web operating system. Use of semantic technology in web operating systems is an emerging field that improves the management and discovery of resources and services. In this paper, we propose PGSW-OS (P2P grid semantic Web OS), a model based on a P2P grid architecture and semantic technology to improve resource management in a web operating system through resource discovery with the aid of semantic features. Our approach integrates distributed hash tables (DHTs) and semantic overlay networks to enable semantic-based resource management by advertising resources in the DHT based upon their annotations to enable semantic-based resource matchmaking. Our model includes ontologies and virtual organizations. Our technique decreases the computational complexity of searching in a web operating system environment. We perform a simulation study using the Gridsim simulator, and our experiments show that our model provides enhanced utilization of resources, better search expressiveness, scalability, and precision.     

Molecular solutions for minimum and exact cover problems in the tile assembly model

The tile assembly model is a novel biological computing model where information is encoded in DNA tiles. It is an efficient way to solve NP-complete problems due to its scalability and parallelism. In this paper, we apply the tile assembly model to solve the minimum and exact set cover problems, which are well-known NP-complete problems. To solve the minimum set cover problem, we design a MinSetCover system composed of three parts, i.e., the seed configuration subsystem, the nondeterministic choice subsystem, and the detection subsystem. Moreover, we improve the MinSetCover system and propose a MinExactSetCover system for solving the problem of exact cover by 3-sets. Finally we analyze the computation complexity and perform a simulation experiment to verify the effectiveness and correctness of the proposed systems.     

Particle-Substrate Collisions, Particle Rebound and Removal

Recent progress in particle capture and rebound and its effect on the adhesion force is reviewed in this paper. Particles rebound when the incident velocity is greater than a characteristic critical velocity. Lower impaction velocity particles experience elastic and plastic deformation. Recent models for particle rebound and capture are discussed and evaluated in terms of their restrictive assumptions and results. Recent experimental data of particle rebound and capture is also discussed, as is the hydrodynamic removal of captured particles. The removal of particles occurs when the applied hydrodynamic removal force overcomes the adhesion force. The effect of adhesion-induced deformation on the removal of particles is introduced and discussed.     

Natural convection mass transfer at conical surfaces

Rates of natural convection mass transfer were determined at vertical cones by measuring the limiting current of the cathodic deposition of copper from acidified copper sulphate solution. Variables studied were cone position (upward or downward apex), apex angle of the cone and copper sulphate concentration. For vertical cones with upward pointing apex the data were represented in the range 4.9×10¹⁰<(Sc Gr)<9×10¹¹ by the equation: $$Sh = 0.128 (Sc Gr)^{0.33}$$ For vertical cones with downward pointing apex the data fit the equation: $$Sh = 0.877 (Sc Gr)^{0.25}$$      

Design of a Commercial Hybrid VTOL UAV System

For the last four decades Unmanned Air Vehicles (UAVs) have been extensively used for military operations that include tracking, surveillance, active engagement with weapons and airborne data acquisition. UAVs are also in demand commercially due to their advantages in comparison to manned vehicles. These advantages include lower manufacturing and operating costs, flexibility in configuration depending on customer request and not risking the pilot on demanding missions. Even though civilian UAVs currently constitute 3 % of the UAV market, it is estimated that their numbers will reach up to 10 % of the UAV market within the next 5 years. Most of the civilian UAV applications require UAVs that are capable of doing a wide range of different and complementary operations within a composite mission. These operations include taking off and landing from limited runway space, while traversing the operation region in considerable cruise speed for mobile tracking applications. This is in addition to being able traverse in low cruise speeds or being able to hover for stationary measurement and tracking. All of these complementary and but different operational capabilities point to a hybrid unmanned vehicle concept, namely the Vertical Take-Off and Landing (VTOL) UAVs. In addition, the desired UAV system needs to be cost-efficient while providing easy payload conversion for different civilian applications. In this paper, we review the preliminary design process of such a capable civilian UAV system, namely the TURAC VTOL UAV. TURAC UAV is aimed to have both vertical take-off and landing and Conventional Take-off and Landing (CTOL) capability. TURAC interchangeable payload pod and detachable wing (with potential different size variants) provides capability to perform different mission types, including long endurance and high cruise speed operations. In addition, the TURAC concept is to have two different variants. The TURAC A variant is an eco-friendly and low-noise fully electrical platform which includes 2 tilt electric motors in the front, and a fixed electric motor and ducted fan in the rear, where as the TURAC B variant is envisioned to use high energy density fuel cells for extended hovering time. In this paper, we provide the TURAC UAV’s iterative design and trade-off studies which also include detailed aerodynamic and structural configuration analysis. For the aerodynamic analysis, an in-house software including graphical user interface has been developed to calculate the aerodynamic forces and moments by using the Vortex Lattice Method (VLM). Computational Fluid Dynamics (CFD) studies are performed to determine the aerodynamic effects for various configurations For structural analysis, a Finite Element Model (FEM) of the TURAC has been prepared and its modal analysis is carried out. Maximum displacements and maximal principal stresses are calculated and used for streamlining a weight efficient fuselage design. Prototypes have been built to show success of the design at both hover and forward flight regime. In this paper, we also provide the flight management and autopilot architecture of the TURAC. The testing of the controller performance has been initiated with the prototype of TURAC. Current work focuses on the building of the full fight test prototype of the TURAC UAV and aerodynamic modeling of the transition flight.     

Performance analysis of support vector machines classifiers in breast cancer mammography recognition

Support vector machine (SVM) is a supervised machine learning approach that was recognized as a statistical learning apotheosis for the small-sample database. SVM has shown its excellent learning and generalization ability and has been extensively employed in many areas. This paper presents a performance analysis of six types of SVMs for the diagnosis of the classical Wisconsin breast cancer problem from a statistical point of view. The classification performance of standard SVM (St-SVM) is analyzed and compared with those of the other modified classifiers such as proximal support vector machine (PSVM) classifiers, Lagrangian support vector machines (LSVM), finite Newton method for Lagrangian support vector machine (NSVM), Linear programming support vector machines (LPSVM), and smooth support vector machine (SSVM). The experimental results reveal that these SVM classifiers achieve very fast, simple, and efficient breast cancer diagnosis. The training results indicated that LSVM has the lowest accuracy of 95.6107 %, while St-SVM performed better than other methods for all performance indices (accuracy = 97.71 %) and is closely followed by LPSVM (accuracy = 97.3282). However, in the validation phase, the overall accuracies of LPSVM achieved 97.1429 %, which was superior to LSVM (95.4286 %), SSVM (96.5714 %), PSVM (96 %), NSVM (96.5714 %), and St-SVM (94.86 %). Value of ROC and MCC for LPSVM achieved 0.9938 and 0.9369, respectively, which outperformed other classifiers. The results strongly suggest that LPSVM can aid in the diagnosis of breast cancer.