统一混沌系统的脉冲控制与同步

对统一混沌系统的脉冲控制稳定性与同步问题进行了理论分析，利用脉冲微分方程理论给出了脉冲控制稳定与同步的充分条件，并对脉冲控制时间间隔的范围作了估计。最后，通过仿真进行了验证。     

PGG隔震器性能试验与分析

本文根据研制的普通钢丝绳鼓型隔震器(简称PGG隔震器)的静力试验，建立了PGG隔震器水平向和垂直向的非线性刚度模型。经冲击台动力试验和理论计算分析，表明PGG隔震器具有优良的爆炸冲击震动隔震性能。     

定义在非闭集上的二人零和连续凸对策

在二人零和对策中,为了确保对策的值及最优策略的存在性,局中人纯策略集为闭集是一个至关重要的条件。本文讨论了一类定义在非闭集[a,b]×[c,d)或[a,b)×[c,d]上的二人零和连续对策,其最优策略的存在性问题。着重研究其赢得函数为凸(或凹)函数时,最优纯策略的存在性。     

高压输电线路铁塔选型漫谈

本文结合近几年来,我国高压输电线路铁塔选型方面的基本情况,和作者本人从事高压输电线路铁塔结构设计中的一些经验和看法,简述了大负荷、新结构的塔型使用现状和铁塔选型应注意的一些问题。     

Preparation of Perovskite-Type Oxides La1-x Srx Fe1-y Coy O3 Using EDTA Sol-Gel Method

Two series of perovskite-type oxides with composition La1-xSrxFeO3 (x≤0.8)and La1-xSrxFe1-yCoyO3( x = 0.2；y = 0.2, 0.4 ) powder productions were synthesized by EDTA complexing sol-gel method. The products were characterized by XRD, TEM, SEM, BET method (N2 adsorption)and laser granularity analysis for different synthesis conditions to obtain the optimum conditions for the preparation process. Single-phased, uniform perovskite-type oxides with small particle size were obtained by EDTA sol-gel process with high stability and repeatability,and the process temperature is much lower than that of solid state reaction method.     

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteries

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 ,Zr4 ). The starting materials were mixed with a high-efficient sander and treated thermally under flowing N2. The samples were characterized by X-ray diffraction (XRD), field-emission gun electron microscopy (FEG), and their electrochemical performance was investigated in the term of cycling behavior. Room temperature discharge capacity about 140.6 mA·h·g-1 was obtained at C/5 rate.     

Defects tracking matrix for mass customization production based on house of quality

The vision of mass customization has driven a movement toward low volume, high variety mass customization production (MCP) at low price. However, defect identification and defect tracking in such systems are extremely difficult because of the frequent reconfiguration needed by the number of different part types and the interruption of the information flow about quality with each reconfiguration of the system. It is important to quickly rebuild quality information flow with MCP system’s reconfiguration synchronously. This paper introduces a defect tracking method based on Quality Function Deployment for every MCP system module. A defects tracking matrix (DTM) based on the House of Quality directly connects manufacturing technologies with quality defects inside a MCP module. Each MCP reconfiguration requires the DTMs’ rearrangement and DTM-chain is proposed. A dynamic reconstructing algorithm synchronizes the DTM-chain with each MCP reconfiguration. A case study demonstrates the usefulness of the DTM and DTM-chain.

证明推广的卡诺定理的另一种方法

本文提出了对于推广的卡诺定理的另一种较严密的证明方法,此种证明方法更易于为学生接受,其物理含义更为明确。     

高压三电平变频器的滤波升压系统中能量过渡过程研究

从不同时间尺度上对高压三电平变频器的滤波升压系统进行数学建模，在秒级的时间尺度上主要研究该负载在不同负载稳态运行时的滤波情况，在毫秒级的时间尺度上主要研究故障时从变频切到工频时的电机过渡过程，从微秒级的尺度上研究了负载切换时缓冲吸收电路的能量过渡过程。同时由于变频器向该系统注入了大量的高频分量，为此建立了变压器高频分布模型，以评估变压器分布电容对全系统的影响。实验结果表明了模型和分析方法的有效性。     

矿热炉把持器的传热分析

以矿热炉电极把持器的传热计算为核心,研究把持器的结构设计和参数选用。通过对冷却水流量、壁面厚度、水垢厚度、烟气温度等影响因素的研究,结合把持器传热边界条件,分析了在不同参数条件下传热变化趋势,为电极把持器的设计和应用提供了参考依据。