Synthesis of diamond from a chlorinated organic substance under hydrothermal conditions

Hydrothermal growth of diamond particles and films was achieved during interaction of a liquid organic precursor (C₂H₃Cl₃) and 10 M NaOH in the presence of diamond or cubic BN seeds at the temperature 300 °C and 1 GPa pressure. Synthesized diamond was thoroughly characterized by TG-DTA, SEM, EDX, TEM, Raman spectroscopy and had (220) preferable orientation according to XRD pattern in the case of the film.     

Phase equilibria on the ternary Mg–Mn–Ce system at the Mg-rich corner

Three isopleths at the Mg-rich corner of Mg–Mn–Ce ternary system were investigated via thermal analysis, SEM/EPMA and XRD. A ternary eutectic reaction was observed at 1 wt.% Mn and 23 wt.% Ce and 592 °C. A solid-solution type ternary intermetallic compound, (Mg,Mn)₁₂Ce, was observed with 0.5 at% solid solubility of Mn in the tetragonal Mg₁₂Ce. With the aid of thermodynamic modeling and experiments, a revised phase diagram for the binary Mg–Ce system and the isopleths of 0.6, 1.8 and 2.5 wt.% Mn were proposed up to 25 wt.% Ce.     

The ternary Gd-Li-Mg system: Phase diagram study and computational evaluation

The binary Gd-Li and the ternary Gd-Li-Mg systems were studied experimentally by thermal analysis and phase equilibration and also by thermodynamic calculations using the CALPHAD method. Ternary phase equilibria at 250 °C were studied with 55 different alloys that were annealed for 400 h and analyzed by x-ray diffractometry. A thermodynamic assessment of the binary Gd-Li system was also performed and the calculated phase diagram is presented. In the Gd-Li-Mg system, ternary solubilities of Li in GdMg (up to 5 at.% Li), GdMg₂ (up to approximately 3 at.% Li), and GdMg₃ (up to 5 at.% Li) were found at 250 °C. No ternary compound was observed. Lattice parameters for different compositions are given for these phases. Thermal analysis using a ternary key sample of composition near the invariant reaction L′=L+(βGd)+GdMg provided the data that were needed to determine a thermodynamic parameter for the ternary liquid. Thermodynamic data sets for the ternary solid solution phases were also developed. Based on the present data sets and those of the binary Gd-Mg and Li-Mg systems from the literature, the phase equilibria in the entire ternary system were calculated. Isothermal and vertical sections of the phase diagram and the projection of the liquidus surface are shown. These calculated phase diagrams are well supported by the experimental data.     

Protective Effect of Water-Soluble C60 Fullerene Nanoparticles on the Ischemia-Reperfusion Injury of the Muscle Soleus in Rats

The biomechanical parameters of muscle soleus contraction in rats and their blood biochemical indicators after the intramuscular administration of water-soluble C₆₀ fullerene at doses of 0.5, 1, and 2 mg/kg 1 h before the onset of muscle ischemia were investigated. In particular, changes in the contraction force of the ischemic muscle soleus, the integrated power of the muscle, the time to achieve the maximum force response, the dynamics of fatigue processes, and the parameters of the transition from dentate to smooth tetanus, levels of creatinine, creatine kinase, lactate and lactate dehydrogenase, and parameters of prooxidant–antioxidant balance (thiobarbituric acid reactive substances, hydrogen peroxide, and reduced glutathione and catalase) were analyzed. The positive therapeutic changes in the studied biomechanical and biochemical markers were revealed, which indicate the possibility of using water-soluble C₆₀ fullerenes as effective prophylactic nanoagents to reduce the severity of pathological conditions of the muscular system caused by ischemic damage to skeletal muscles.     

Electrochemical Synthesis of Chromium Silicides from Molten Salts

Electrochemical synthesis of chromium silicides from NaCl-KCl-K2SiF6-CrF3 system has been investigated by cyclic voltammetry and DC （direct current） electrolysis at 850℃. The process of Cr and Si joint electroreduction in chloride-fluoride melt proceeds in one stage in a kinetic mode. The cathode product was analyzed using XRD （X-ray diffraction） method. XRD data have confirmed that CraSi is the dominant phase. SEM （scanning electron microscopy） results have shown that Cr3Si powder samples consist of 50-150 lain particles and that tungsten silicide was formed at the surface of tungsten cathode after chrome-free system electrolysis.