Enhanced hydrothermal stability of ZSM-5 formed from nanocrystalline seeds for naphtha catalytic cracking

We successfully synthesized hydrothermally stable ZSM-5 with crystalline nano seeds. We employed a template-free method using ZSM-5 crystalline nano seeds and sodium silicate as a silica source. The prepared ZSM-5 exhibited uniform crystal size and relative crystallinity greater than 100 %. The size of the crystalline nano seed in the scale of 100 nm was found to be the optimum size for obtaining uniform, highly crystalline ZSM-5 with structural stability. After P-modification, the synthesized ZSM-5 with the optimally sized seed showed high hydrothermal stability and improved catalytic naphtha cracking activity compared to a commercial ZSM-5 catalyst. In order to find the elements for the increased hydrothermal stability, the samples were evaluated by studying crystallinity, aluminum spectrum, and acidity using XRD, solid-state NMR, and NH₃-TPD, respectively after steaming at 800 °C for 24 h. It is speculated that the increased hydrothermal stability of the ZSM-5 resulted mainly from the increased aluminum structural stability.     

Error estimation for the automated multi‐level substructuring method

In this study, we propose an effective method to estimate the reliability of finite element models reduced by the automated multi‐level substructuring (AMLS) method. The proposed error estimation method can accurately predict relative eigenvalue errors in reduced finite element models. A new, enhanced transformation matrix for the AMLS method is derived from the original transformation matrix by properly considering the contribution of residual substructural modes. The enhanced transformation matrix is an important prerequisite to develop the error estimation method. Adopting the basic concept of the error estimation method recently developed for the Craig–Bampton method, an error estimation method is developed for the AMLS method. Through various numerical examples, we demonstrate the accuracy of the proposed error estimation method and explore its computational efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

Mechanical properties of concrete containing phase-change material

This study aimed to investigate the mechanical properties of concrete containing solid–liquid phase-change material (PCM) and focused on two key factors. First, a systematic study on the mechanical performance of PCM-modified concretes was conducted, including compressive, elastic modulus, and shrinkage tests. Second, because PCM provides high latent heat during the solid–liquid phase change, the effects of the solid phase and liquid phase on the mechanical properties of concrete were also explored. Results of this study showed that the solid–liquid phase of PCM affected the mechanical properties of concrete. For example, the compressive strength of 10% PCM concrete in solid phase (23 °C) and liquid phase (40 °C) at 28 days was 29.30 and 19.57 MPa, respectively. In addition, with increasing PCM content, the mechanical properties were degraded. For example, 10, 20, and 30% of PCM content lowered the compressive strength by 35.4, 58.4, and 74.3%, respectively. Therefore, concrete with PCM may not be suitable for structural elements. However, PCM is an important solution for optimizing energy consumption in modern buildings. It can absorb or emit large amounts of heat to store or release thermal energy. These properties can be used to control building temperatures resulting in energy saving and carbon reduction.     

A portable multifunctional power box

In this study, we used a microcontroller to provide and control power to multiple sources using the highly efficient energy storage provided by the direct current (DC) bus of a lithium iron phosphate (LiFePO₄) battery. Through multiple loops, high-efficiency buck and boost conversion, and DC-to-alternating current (AC) conversion, the power box can quickly and simultaneously provide three sets of voltage outputs, 5-V DC, 19–22-V DC, and 110-V AC, to different electronic devices. Multiple sets of conversion output voltages were achieved using multiple sets of conversion circuits, in parallel to the DC bus. Compared with a single conversion output voltage, the multiple sets of conversion output voltages from the energy storage battery had a higher practicability. For a single output voltage, the battery provided a suitable voltage to different electric devices via a substage converter, thus lowering the overall conversion efficiency. For practical applications such as camping, blackouts, long journeys, emergencies, and rescues, the multiple sets of converted voltage outputs offer substantial functional convenience. For safety control, we used a single-chip controller to quickly detect various overcurrent situations.     

Minimum Setup Minimum Aberration Two‐level Split‐plot Type Designs for Physical Prototype Testing

Although new technologies allow for less effort in prototyping, physical testing still remains an important step in the product development cycle. Well‐planned experiments are useful to guide the decision‐making process. During the design of an experiment, one of the challenges is to balance limited resources and system constraints to obtain useful information. It is common that prototypes are composed of several parts, with some parts more difficult to assemble than others. And, usually, there is only one piece available of each part type and a large number of different setups. Under these conditions, designs with randomization restrictions become attractive approaches. Considering this scenario, a new and additional criterion, minimum setup, to construct split‐plot type designs is presented. Designs with the minimum number of setups of the more difficult parts, which are especially useful for screening purposes in physical prototype testing, are discussed. The use of the proposed criterion combined with minimum aberration for selecting a regular design is shown through a real application in testing car prototypes. As a tool to practitioners, catalogs of selected 32‐run minimum setup minimum aberration split‐split‐plot and split‐split‐split‐plot designs are presented. More complete catalogs are available as Supporting information. Copyright © 2015 John Wiley & Sons, Ltd.