Cuticular Extracts from Acromis sparsa (Coleoptera: Cassidinae) Mediate Arrestment Behavior of the Commensal Canestriniid Mite Grandiella rugosita

Astigmatid mites in the family Canestriniidae are often closely associated with tortoise leaf beetles (Chrysomelidae: Cassidinae). For example, the survival of the commensal canestriniid mite Grandiella rugosita depends on dispersal to the cassidine beetle Acromis sparsa. Here, we tested whether the beetle cuticle provides chemical cues for host recognition for G. rugosita. In two-choice assays with cuticular extracts from A. sparsa and the co-occurring, non-host cassidine Chelymorpha alternans offered simultaneously, mites clearly preferred the area treated with extract from their host. In no-choice assays, G. rugosita spent three times longer and moved three times slower on host cuticular extracts compared to non-host extracts and the solvent control. Analyses of the chemical composition of cuticular extracts from males and females of A. sparsa and C. alternans revealed complex mixtures of mainly methyl branched hydrocarbons, which clearly separated both species in a principal component analysis. We found no qualitative difference between males and females of either species, but in C. alternans quantitative differences between males and females were detected. Our results demonstrate that G. rugosita is able to discriminate between cuticular extracts from its host A. sparsa and the non-host C. alternans. The components eliciting the observed arrestment behavior remain to be determined.     

Catalytic combustion for industrial gas turbines

This brief review provides a general account of work directed at the use of catalytic combustion in gas turbine engines. A major potential advantage of using catalytic combustion is that the fuel can be burnt efficiently at temperatures low enough (< 1500°C) to avoid significant oxidation of atmospheric nitrogen. This advantage was less important when catalytic combustion was demonstrated in the 1970s than it is today and received relatively little attention until the following decade. After discussion of the principles involved in the design of a combustor that must meet the mixing, size, performance and durability goals of a based gas turbine application, the review turns to accounts of experiments conducted on a laboratory scale with simple configurations. These established basic operating parameters for satisfactory combustion performance and led to larger scale work and to prototype design concepts for industrial gas turbines in the late 70s and early 80s. Test results were encouraging but were not pursued definitively in the U.S.A. Activity continued at several centres in Japan, with exploration of a number of different catalyst arrangements, geometries, and control systems, again with encouraging results. At the same time, there has been renewed interests in the U.S.A. and in Europe, spurred largely by the emphasis on reducing emissions of nitrogen oxides (NOx). The paper concludes with suggestions for further development of catalytically stabilized combustion systems for gas turbines. These systems must ensure adequate pre-catalyst temperature, with evenly premixed fuel and air, and sufficient temperature rise across the catalyst to ensure effective completion of reaction in a homogeneous reaction mode. The outstanding problems are largely concerned with questions of catalyst integrity and longevity in practical configurations and realistic engine operating conditions.     

Development and evaluation of surface treatments to enhance the fiber-matrix adhesion in PAN-based carbon fiber/liquid crystal polymer composites. Part I: Coupling agent and amine surface treatments

Several surface treatments, using both commercially available coupling agents and reagents containing multiple amines, were applied to commingled continuous as-received AS4 carbon reinforcing fiber/liquid crystal polymer (LCP) matrix fibers. Unidirectional composites (normally 60 vol% carbon fiber) were prepared from as-received and treated commingled fibers and characterized. To estimate the effect the effect of the treatments on fiber-matrix adhesion, short beam shear (SBS) tests were conducted, the failure surfaces were examined, and spectroscopic studies wee performed. The mean SBS strength of the as-received unidirectional AS4 carbon fiber/LCP matrix composite system was 49 MPa. The best coupling agent and amine treatments yielded increases in composite shear strength of ∼ 10 to 20%, relative to the as-received AS4/LCP system. For the amine treatments, ESCA and FTIR analyses suggested of both the carbon and LCP fibers may have caused the increased adhesion. Moreover, SEM analysis of the failure surfaces of SBS specimens from composites prepared with the treated fibers may have caused the increased adhesion. Moreover, SEM analysis of the failure surfaces of SBS specimens from composites prepared with the treated fibers (both with coupling agents and amines) showed that strong fiber-matrix adhesion was present. That is, failure occurred in the LCP matrix material.     

Experimental study of diffusivity of hexane in bitumen-saturated porous media under high temperature/pressure conditions

Solvent mass transfer plays a key role in a thermal gravity drainage process involving solvent. The diffusion coefficients of solvent in such a process are not well studied. This article presents the effective diffusion coefficients of solvent in bitumen-saturated sands under high temperature/pressure conditions measured using a CT scanning technique. Experimental results show that the effective diffusion coefficient of n-hexane in bitumen-saturated sands varied with the solvent concentration or with the viscosity of solvent–bitumen mixture (i.e., D_e ∝ c^0.4 or D_e ∝ μ_m^−0.46). The solvent concentration weighted diffusion coefficient of n-hexane in the bitumen under the condition 160–170°C/1,900 kPa had an order of magnitude of about 10⁻⁵ cm²/s for solvent volume concentration less than 0.2. The penetration distance of n-hexane in bitumen-saturated sands depended on the nonlinearity of diffusion and had a value of −2 cm after 1-day diffusion. The stronger the nonlinearity of diffusion, the shorter the penetration distance.     

Tab adhesive in a composite compression specimen

Determination of the compressive strength of a composite depends on many experimental parameters. One of them is the adhesive used to bond the tabs to the compression specimen. Experimental results show that the compressive strength has no significant change when different adhesives with different moduli are used. The compressive strength was also shown to be independent of adhesive thickness in a composite compression specimen. A finite element analysis was utilized in this study to investigate the effect of tab adhesive properties, i.e., the modulus and thickness of the adhesive layer, on the compressive strength. The stress distributions along the adhesive layer and stress concentrations at the tab tip of a composite compression specimen are presented. The analytical prediction coincides with the limited experimental data.     

A cathode support structure for use in a magnetron oscillator experiment

A low temperature co-fired ceramic (LTCC) material system has been used to develop a protype field emission cathode structure for use in an experimental magnetron oscillator. The structure is designed for used with 30 gated field emission array (GFEA) die electrically connected through silver metal traces and electrical vias. To approximate a cylinder, the cathode structure (48 mm long and 13.7 mm in diameter) is comprised of 10 faceted plates which cover the GFEA dies. Slits in the facet plates allow electron injection. The GFEA die (3 mm × 8 mm) are placed in axial columns of 3 and spaced azimuthally around a cylindrical support structure in a staggered configuration resulting in 10 azimuthal locations. LTCC manufacturing techniques were developed in order to fabricate the newly designed cathode with seven layers wrapped to form the cylinder with electrical traces and vias. Two different cathode wrapping techniques and two different via filling techniques were studied and compared. Two different facet plate manufacturing techniques were studied. Finally, four different support stand configurations for firing the cylindrical structure were also compared with a square post stand having the best circularity and linearity measurements of the fired structure.     

Inactivation of Vibrio parahaemolyticus in Hard Clams (Mercanaria mercanaria) by High Hydrostatic Pressure (HHP) and the Effect of HHP on the Physical Characteristics of Hard Clam Meat

Shellfish may internalize dangerous pathogens during filter feeding. Traditional methods of depuration have been found ineffective against certain pathogens. The objective was to explore high hydrostatic pressure (HHP) as an alternative to the traditional depuration process. The effect of HHP on the survival of Vibrio parahaemolyticus in live clams (Mercanaria mercanaria) and the impact of HHP on physical characteristics of clam meat were investigated. Clams were inoculated with up to 7 log CFU/g of a cocktail of V. parahaemolyticus strains via filter feeding. Clams were processed at pressures ranging from 250 to 552 MPa for hold times ranging between 2 and 6 min. Processing conditions of 450 MPa for 4 min and 350 MPa for 6 min reduced the initial concentration of V. parahaemolyticus to a nondetectable level (<10¹ CFU/g), achieving >5 log reductions. The volume of clam meat (processed in shell) increased with negligible change in mass after exposure to pressure at 552 MPa for 3 min, while the drip loss was reduced. Clams processed at 552 MPa were softer compared to those processed at 276 MPa. However, all HHP processed clams were found to be harder compared to unprocessed. The lightness (L*) of the meat increased although the redness (a*) decreased with increasing pressure. Although high pressure‐processed clams may pose a significantly lower risk from V. parahaemolyticus, the effect of the accompanied physical changes on the consumer's decision to purchase HHP clams remains to be determined. Practical Application : Shellfish may contain dangerous foodborne pathogens. Traditional methods of removing those pathogen have been found ineffective against certain pathogens. The objective of this research was to determine the effect of high hydrostatic pressure on V. parahaemolyticus in clams. Processing conditions of 450 MPa for 4 min and 350 MPa for 6 min reduced the initial concentration of V. parahaemolyticus to a nondetectable level, achieving >5 log reductions.     

Changes in selected biochemical and sensory parameters as affected by the superficial inoculation of Penicillium camemberti on dry fermented sausages

An atoxigenic strain of Penicillium camemberti was superficially inoculated on fermented sausages in an attempt to improve their sensory properties. The growth of this mould on the surface of the sausages resulted in an intense proteolysis and lipolysis, which caused an increase in the concentration of free amino acids, free fatty acids (FFA) and volatile compounds. Many of these were derived from amino acid catabolism and were responsible for the "ripened flavour", i.e. branched aldehydes and the corresponding alcohols, acids and esters. The development of the fungal mycelia on the surface of the sausages also protected lipids from oxidation, resulting in both lower 2-thiobarbituric acid (TBARS) values and lipid oxidation-derived compounds, such as aliphatic aldehydes and alcohols. The sensory analysis of superficially inoculated sausages showed clear improvements in odour and flavour and, as a consequence, in the overall quality of the sausages. Therefore, this strain is proposed as a potential starter culture for dry fermented sausage production.     

Characterization and properties of metallic iron nanoparticles: spectroscopy, electrochemistry, and kinetics

There are reports that nano-sized zero-valent iron (Fe0) exhibits greater reactivity than micro-sized particles of Fe0, and it has been suggested that the higher reactivity of nano-Fe0 may impart advantages for groundwater remediation or other environmental applications. However, most of these reports are preliminary in that they leave a hostof potentiallysignificant(and often challenging) material or process variables either uncontrolled or unresolved. In an effort to better understand the reactivity of nano-Fe0, we have used a variety of complementary techniques to characterize two widely studied nano-Fe0 preparations: one synthesized by reduction of goethite with heat and H2 (Fe(H2)) and the other by reductive precipitation with borohydride (Fe(BH)). Fe(H2) is a two-phase material consisting of 40 nm alpha-Fe0 (made up of crystals approximately the size of the particles) and Fe3O4 particles of similar size or larger containing reduced sulfur; whereas Fe(BH) is mostly 20-80 nm metallic Fe particles (aggregates of <1.5 nm grains) with an oxide shell/coating that is high in oxidized boron. The FeBH particles further aggregate into chains. Both materials exhibit corrosion potentials that are more negative than nano-sized Fe2O3, Fe3O4, micro-sized Fe0, or a solid Fe0 disk, which is consistent with their rapid reduction of oxygen, benzoquinone, and carbon tetrachloride. Benzoquinone-which presumably probes inner-sphere surface reactions-reacts more rapidly with FeBH than Fe(H2), whereas carbon tetrachloride reacts at similar rates with FeBH and Fe(H2), presumably by outer-sphere electron transfer. Both types of nano-Fe0 react more rapidlythan micro-sized Fe0 based on mass-normalized rate constants, but surface area-normalized rate constants do not show a significant nano-size effect. The distribution of products from reduction of carbon tetrachloride is more favorable with Fe(H2), which produces less chloroform than reaction with Fe(BH).