A comparable study of image approximations to the reaction field

The recently developed high-order accurate multiple image approximation to the reaction field for a charge inside a dielectric sphere [J. Comput. Phys. 223 (2007) 846-864] is compared favorably to other commonly employed reaction field schemes. These methods are of particular interest because they are useful in the study of biological macromolecules by the Monte Carlo and Molecular Dynamics methods.     

Numerical study of steady turbulent flow through bifurcated nozzles in continuous casting

Bifurcated nozzles are used in continuous casting of molten steel, where they influence the quality of the cast steel slabs. The present study performs two-dimensional (2-D) and three-dimensional (3-D) simulations of steady turbulent(K- ε) flow in bifurcated nozzles, using a finite-element (FIDAP) model, which has been verified previously with water model experiments. The effects of nozzle design and casting process operating variables on the jet characteristics exiting the nozzle are investigated. The nozzle design parameters studied include the shape, angle, height, width, and thickness of the ports and the bottom geometry. The process operating practices include inlet velocity profile and angle as well as port curvature caused by erosion or inclusion buildup. Results show that the jet angle is controlled mainly by the port angle but is steeper with larger port area and thinner walls. The degree of swirl is increased by larger or rounder ports. The effective port area, where there is no recirculation, is increased by smaller or curved ports. Flow asymmetry is more severe with skewed or angled inlet conditions or unequal port sizes. Turbulence levels in the jet are higher with higher casting speed and smaller ports. Formerly Research Assistant, Department of Mechanical and Industrial Engineering. Formerly Research Assistant in the same department.     

Geographic distribution and clinical description of leishmaniasis cases in Peru

Asymmetric acetylcholinesterase (AChE) is anchored to the basal lamina (BL) of cholinergic synapses via its collagenic tail, yet the complement of matrix receptors involved in its attachment remains unknown. The development of a novel overlay technique has allowed us to identify two Torpedo BL components that bind asymmetric AChE: a polypeptide of approximately 140 kDa and a doublet of 195-215 kDa. These were found to stain metachromatically with Coomassie blue R-250, were solubilized by acetic acid, and were sensitive to collagenase treatment. Upon sequence analysis, the 140 kDa polypeptide yielded a characteristic collagenous motif. Another AChE-binding BL constituent, identified by overlay, corresponded to a heparan sulfate proteoglycan. Lastly, we established that this proteoglycan, but not the collagenous proteins, interacted with at least one heparin binding domain of the collagenic tail of AChE. Our results indicate that at least two BL receptors are likely to exist for asymmetric AChE in Torpedo electric organ.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.     

Increasing testing productivity and software quality: A comparison of software testing methodologies within NASA

Pressure to compress the development life cycle and reduce the duration and resources committed to testing lead to experimentation in testing at the NASA Goddard Space Flight Centerís Software Engineering Laboratory. This study investigates the trend to reduce developer testing and increasingly rely upon inspection techniques and independent functional testing to shorten the development life cycle, improve testing productivity, and improve software quality.An approach is developed to conduct this comparison. In particular, the problem faced by software researchers, having a comprehensive characterization of software projects so similar types may be identified for comparative studies, is addressed using expert opinion.     

Influence of clinical mastitis during early lactation on reproductive performance of Jersey cows

In the common goby, Pomatoschistus microps (Pisces, Gobiidae), males build nests under mussel shells where they care for the eggs until hatching. To investigate why male common gobies cannibalize their own eggs (filial cannibalism), we conducted a feeding experiment. Males given little food ate from their eggs more often than males given food in excess. However, males given mussel meat in excess did not eat more of their eggs than males fed with both mussel meat in excess and goby eggs. This may suggest that male common gobies cannibalize their eggs to obtain energy rather than essential nutrients lacking in other diets. Moreover, males ate their whole clutch if it was exceptionally small regardless of food treatment, suggesting that males stop investing in their clutch if its reproductive value is less than the cost of guarding it. Thus, whole clutch cannibalism and partial clutch cannibalism seem to be governed by different factors. Furthermore, poorly built nests were associated with starved males, suggesting that nest concealing is costly. There was an association between how well the nest was built and partial clutch filial cannibalism, suggesting that the appearance of the nest may indicate the condition of the male, and thus the risk of filial cannibalism. Copyright 1998 The Association for the Study of Animal Behaviour.     

Coefficients of dynamic friction and the mechanical melting mechanism for vinylidene chloride copolymers

Previous research and this research indicate that the mechanical melting for poly(vinylidene chloride) copolymers (PVDC) is complex. Mechanical melting is defined as the melting (or devitrification) of a polymer when a significant portion of the thermal energy originates from a mechanical energy dissipative process. PVDC mechanically melted on a moving metal surface at temperatures of the test instrument that were considerably lower than the differential scanning calorimetry (DSC) onset melting temperature. PVDC formulated with low levels of high density polyethylene (HDPE), however, melted at metal temperatures near the DSC onset melting temperature. Two different mechanical melting mechanisms are proposed to explan the data, and the frictional data are discussed with respect to solids conveying in a single-screw, plasticating extruder.     

Visual search for natural grains in pigeons (Columba livia): Search images and selective attention.

The experiments reported here were designed to test the suggestion of many researchers that selective attention to visual features of a prey can account for search-image effects. In 3 experiments pigeons ate wheat and vetch grains presented on multicolored and gray gravel trays. In Experiment 1 search-image effects were evident when grains were cryptic but not when they were conspicuous. Experiment 2 demonstrated that search images can be activated when the grains encountered are either cryptic or conspicuous but that search images affect search performance only when the grains are cryptic. Experiment 3 demonstrated that search images are short-term in nature: A 3-min delay between successive encounters with a type of grain disrupted an activated search image. The discussion addresses how these results further develop a model in which search images are viewed as selective attention to visual features of a prey. (PsycINFO Database Record (c) 2010 APA, all rights reserved)