High quality gate dielectrics formed by rapid thermal chemical vapor deposition of silane and nitrous oxide

In the present study, we have performed electrical characterization of oxides deposited via rapid thermal chemical vapor deposition using SiH₄ and N₂O. We have investigated the effect of temperature, pressure, and SiH₄ to N₂O ratio on the electrical and material properties of as-deposited films. We have found that as-deposited oxides deposited at low temperatures, low pressures, and with a low silane to nitrous oxide ratio of ～0.5% give good material and electrical properties. The as-deposited films are stoichiometric in nature and have high deposition rates. As-deposited films had very low D_it values, high breakdown fields, and excellent subthreshold swing. The leakage currents and metal oxide semiconductor field effect transistor current drive, although lower than thermal oxides, were found to be quite acceptable. We have also investigated the thickness dependence of the films and found that as the film thickness is reduced below 50Å, the reliability improves for all oxides including the silicon-rich deposited oxides.     

Social science data and the Supreme Court: Lockhart as a case in point.

In this article, an analysis is given of Lockhart v. McCree, a recent decision in which the Supreme Court held it was not unconstitutional in cases in which the prosecution was requesting capital punishment to exclude from trial jurors during the guilt phase of the prosecution those jurors who have moral or religious scruples against imposing the death penalty. At issue in the case was the scientific soundness of three decades of social science research that indicated that the absence of jurors with such scruples created a jury that was pro-prosecution and, therefore, conviction-prone. The ways in which those data were scrutinized by both the majority and the dissent in Lockhart are described. The case is used as an example of the use of social science data in constitutional decision making and of the need to conduct methodologically rigorous, highly relevant research if psychologists are to genuinely influence judicial opinion on controversial issues. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Using simulation‐based experiments for software requirements engineering

We describe the use of simulation‐based experiments to assess the computer support needs of automation supervisors in the United States Postal Service (USPS). Because of the high cost of the proposed system, the inability of supervisors to articulate their computer support needs, and the infeasibility of direct experimentation in the actual work environment, we used a simulation to study end‐user decision making, and to experiment with alternative computer support capabilities. In Phase One we investigated differences between expert and novice information search and decision strategies in the existing work environment. In Phase Two, we tested the impact of computer support features on performance. The empirical results of the two experiments showed how to differentially support experts and novices, and the effectiveness of proposed information systems before they were built. The paper concludes by examining the implications of the project for the software requirements engineering community.     

A comparable study of image approximations to the reaction field

The recently developed high-order accurate multiple image approximation to the reaction field for a charge inside a dielectric sphere [J. Comput. Phys. 223 (2007) 846-864] is compared favorably to other commonly employed reaction field schemes. These methods are of particular interest because they are useful in the study of biological macromolecules by the Monte Carlo and Molecular Dynamics methods.     

Numerical study of steady turbulent flow through bifurcated nozzles in continuous casting

Bifurcated nozzles are used in continuous casting of molten steel, where they influence the quality of the cast steel slabs. The present study performs two-dimensional (2-D) and three-dimensional (3-D) simulations of steady turbulent(K- ε) flow in bifurcated nozzles, using a finite-element (FIDAP) model, which has been verified previously with water model experiments. The effects of nozzle design and casting process operating variables on the jet characteristics exiting the nozzle are investigated. The nozzle design parameters studied include the shape, angle, height, width, and thickness of the ports and the bottom geometry. The process operating practices include inlet velocity profile and angle as well as port curvature caused by erosion or inclusion buildup. Results show that the jet angle is controlled mainly by the port angle but is steeper with larger port area and thinner walls. The degree of swirl is increased by larger or rounder ports. The effective port area, where there is no recirculation, is increased by smaller or curved ports. Flow asymmetry is more severe with skewed or angled inlet conditions or unequal port sizes. Turbulence levels in the jet are higher with higher casting speed and smaller ports. Formerly Research Assistant, Department of Mechanical and Industrial Engineering. Formerly Research Assistant in the same department.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.     

Increasing testing productivity and software quality: A comparison of software testing methodologies within NASA

Pressure to compress the development life cycle and reduce the duration and resources committed to testing lead to experimentation in testing at the NASA Goddard Space Flight Centerís Software Engineering Laboratory. This study investigates the trend to reduce developer testing and increasingly rely upon inspection techniques and independent functional testing to shorten the development life cycle, improve testing productivity, and improve software quality.An approach is developed to conduct this comparison. In particular, the problem faced by software researchers, having a comprehensive characterization of software projects so similar types may be identified for comparative studies, is addressed using expert opinion.     

Coefficients of dynamic friction and the mechanical melting mechanism for vinylidene chloride copolymers

Previous research and this research indicate that the mechanical melting for poly(vinylidene chloride) copolymers (PVDC) is complex. Mechanical melting is defined as the melting (or devitrification) of a polymer when a significant portion of the thermal energy originates from a mechanical energy dissipative process. PVDC mechanically melted on a moving metal surface at temperatures of the test instrument that were considerably lower than the differential scanning calorimetry (DSC) onset melting temperature. PVDC formulated with low levels of high density polyethylene (HDPE), however, melted at metal temperatures near the DSC onset melting temperature. Two different mechanical melting mechanisms are proposed to explan the data, and the frictional data are discussed with respect to solids conveying in a single-screw, plasticating extruder.     

Visual search for natural grains in pigeons (Columba livia): Search images and selective attention.

The experiments reported here were designed to test the suggestion of many researchers that selective attention to visual features of a prey can account for search-image effects. In 3 experiments pigeons ate wheat and vetch grains presented on multicolored and gray gravel trays. In Experiment 1 search-image effects were evident when grains were cryptic but not when they were conspicuous. Experiment 2 demonstrated that search images can be activated when the grains encountered are either cryptic or conspicuous but that search images affect search performance only when the grains are cryptic. Experiment 3 demonstrated that search images are short-term in nature: A 3-min delay between successive encounters with a type of grain disrupted an activated search image. The discussion addresses how these results further develop a model in which search images are viewed as selective attention to visual features of a prey. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Enterprise architecture,IT effectiveness and the mediating role of IT alignment in US hospitals

Despite the possible benefits of implementing healthcare information technologies, successful implementation of effective healthcare information technology is constrained by cultural and regulatory concerns and technical obstacles encountered when establishing or upgrading an organisation's enterprise infrastructure. In this paper, we advance Ross' four‐stage model of enterprise architecture maturity as a valuable IT resource for helping healthcare organisations sustain a competitive advantage. We use partial least squares (PLS) structural equation modelling to analyse survey data from 164 US hospitals at different stages of EA maturity. Our results provide evidence that enterprise architecture maturity directly influences the effectiveness of hospitals' IT resources for achieving strategic goals. Further, enterprise architecture maturity indirectly influences the effectiveness of IT resources when IT alignment is incorporated as a mediating variable. We discuss the implications of our findings for research and practice and suggest opportunities for future research.