Evaluation of Tungsten Coil Atomic Emission Spectrometry for the Direct Determination of Al in Tea Infusions and Iced Tea

This work describes the determination of aluminum in tea infusions and iced tea by tungsten coil atomic emission spectrometry (WCAES). The instrumentation is simple, inexpensive, and potentially portable. It uses a tungsten filament extracted from 150 W, 15 V commercially available slide projector light bulbs as electrothermal atomizer. A simple power supply that provides a constant potential is used to heat the coil. Tea infusions were directly analyzed by application of an optimized heating program. In order to avoid matrix interferences, the iced tea samples were diluted with an oxidizing mixture composed of hydrogen peroxide and nitric acid and also analyzed by a tailored heating program. Aluminum was quantified in all samples, and the results were in agreement with those obtained by inductively coupled plasma optical emission spectrometry at a 95 % confidence level. The limit of detection and the relative standard deviation for a solution containing 2.5 mg L^?1 Al (n?=?10) were determined, and the values were 0.09 mg L^?1 and 5.1 %, respectively.     

A comprehensive approach to chemical engineering computational problems

A general programme for the solution of large sparse systems of non-linear equations is presented that allows to afford in a general way most computational problems in chemical engineering.Equipments and plants can, in fact, be represented as networks of “unit cells” to which material and energy balance equations are applied in finite form.The lay-out of the network and the assessment of the equations is a matter of the engineer's judgment and depends upon the aims of the computation and the complexity and importance of the phenomena involved.The solution of the equations then becomes a straightforward procedure that may be committed to the computer.Examples of application to a variety of chemical equipments and to process computation are given.     

The role of creep and fatigue in determining the high-temperature behaviour of AISI H11 tempered steel for aluminium extrusion dies

The present study was aimed to analyze the effect of loading cycles on the behaviour of the AISI H11 tool steel commonly used for aluminium extrusion dies working at high temperatures and under high, cyclic stresses. A technological test method in which the specimen geometry resembled the mandrel of a hollow extrusion die was developed. Finite element analyses were performed to aid in determining specimen geometry and dimensions as well as the levels of stress to be applied to the specimen so as to replicate the conditions typically encountered by industrial hollow extrusion dies. Tests were performed on a Gleeble thermomechanical simulator by heating the specimen using Joule's effect and by applying loading for up to 6.30 h or till specimen failure. Displacements during the tests at 380, 490, 540 and 580 °C and under the average stresses of 400, 600 and 800 MPa were determined. The specimens were tested under creep (with the load held at a fixed value), fatigue (cyclic loading) and creep–fatigue (cyclic loading with a 3 min dwell-time) loading, thereby allowing a direct comparison between different deforming mechanisms. The results showed that the test could physically simulate the cyclic loading on the hollow die during aluminium extrusion and that the creep condition represented the most severe working condition. In addition, the tests could reveal the interaction between creep and fatigue mechanisms.     

Parastrephia quadrangularis: A Possible Alternative to Inhibit the Microbial Effect on the Generation of Acid Mine Drainage

Mine Water and the Environment - The role of iron- and sulfur- oxidizing microorganisms in the generation of acid mine drainage (AMD) from sulfide ores and tailings is widely recognized. The...     

In vitro antimicrobial properties of silver–polysaccharide coatings on porous fiber-reinforced composites for bone implants

Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver–polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.     

Widespread microsatellite instability in sebaceous tumours of patients with the Muir-Torre syndrome

OBJECTIVE: Thoracic injury remains a major source of morbidity and mortality in urban trauma centers. With the advent and increasing expertise in video assisted thoracic surgery, this modality has become an attractive alternative in the management of patients with thoracic injury. This report will review our experience with video assisted thoracic surgery at a level I trauma center and attempt to further delineate the indications for and timing of thoracoscopy in thoracic trauma. METHODS: We identified 16 patients who had undergone video assisted thoracic surgery following chest trauma between July 1991 and June 1994. There were 15 penetrating and one blunt trauma. All 16 patients were initially treated with tube thoracostomy. From 0-20 days post-injury, video assisted thoracic surgery was attempted with either diagnostic or therapeutic intentions. RESULTS: Twelve of the 16 patients (75%) had successful thoracoscopy. Three patients had diaphragmatic injury excluded and nine patients had successful evacuation of clotted hemothoraces. Evacuation of clotted hemothorax up to 7 days post-injury was safe and easily accomplished. Four patients (25%) had unsuccessful thoracoscopy and were converted to standard thoracotomy; failure was attributed to either suboptimal single lung ventilation or severe pleural inflammatory reaction. The only death in the entire group occurred 10 days after a thoracotomy for retained hemothorax. The median post-operative hospital stay following successful video assisted thoracic surgery was 3.5 days. CONCLUSIONS: Video assisted thoracic surgery can be utilized as an effective and safe method for the initial diagnostic evaluation and surgical management of stable patients with penetrating thoracic trauma.     

Rugged, portable tungsten coil atomic emission spectrometer

Tungsten coil atomic emission spectrometry is an ideal technique for field applications because of its simplicity, low cost, low power requirement, and independence from cooling systems. A new, portable, compact design is reported here. The tungsten coil is extracted from an inexpensive 24 V, 250 W commercial light bulb. The coil is housed in a small, aluminum cell. The emission signal exits from a small aperture in the cell, while the bulk of the blackbody emission from the tungsten coil is blocked. The resulting spectra exhibit extremely low background signals. The atomization cell, a single lens, and a hand-held charge coupled device (CCD) spectrometer are fixed on a 1 × 6 × 30 cm ceramic base. The resulting system is robust and easily transported. A programmable, miniature 400 W solid-state constant current power supply controls the temperature of the coil. Fifteen elements are determined with the system (Ba, Cs, Li, Rb, Cr, Sr, Eu, Yb, Mn, Fe, Cu, Mg, V, Al, and Ga). The precision ranges from 4.3% to 8.4% relative standard deviation for repetitive measurements of the same solution. Detection limits are in the 0.04 to 1500 μg/L range. Accuracy is tested using standard reference materials for polluted water, peach leaves, and tomato leaves. For those elements present above the detection limit, recoveries range from 72% to 147%.     

Decreased nitric oxide production accounts for secondary arteriolar constriction after retinal branch vein occlusion

PURPOSE: After retinal branch vein occlusion (BVO), the arteriole crossing the occluded territories is often constricted. This constriction persists up to several weeks and is correlated with the development of extended territories of nonperfused capillaries. These are results of an investigation supporting the hypothesis that decrease in the production of nitric oxide (NO) accounts for the observed arteriolar constriction. METHODS: Preretinal [NO] was measured using an NO microprobe in the anesthetized miniature pigs, before and during the first 4 hours after experimental branch vein occlusion. Modifications of arteriolar diameter were correlated to preretinal [NO] changes. The retinal arteriolar sensitivity to constitutive NO was checked by applying preretinal puff injections of nitro-L-arginine (L-NA) after both systemic hypoxia and branch vein occlusion. RESULTS: Two hours after branch vein occlusion there was a 73.7 +/- 4% decrease in preretinal [NO] and a simultaneous 25.4 +/- 3.4% decrease in the diameter of the arteriole in the affected territory. Both persisted for at least 4 hours after branch vein occlusion. Applying a puff of L-NA to an arteriole previously dilated by systemic hypoxia induced a vasoconstriction. However, no arteriolar constriction was observed when a puff was applied to an arteriole after branch vein occlusion. CONCLUSIONS: These results show that experimental branch vein occlusion induces in the affected retina an impairment in the release of constitutive NO and an arteriolar constriction, which, in turn, contributes to the development of hypoxia in tissue and neuronal swelling and death in the inner retina.