Unsteady extinction mechanism of nonpremixed flame interacting with a vortex

The extinction mechanism of a CH₄/N₂-air counterflow nonpremixed flame interacting with a single vortex was numerically studied. An augmented reduced mechanism was used to treat the CH₄ oxidation reactions. The contribution of each term in the energy and the OH species equations were evaluated to investigate the unsteady extinction mechanism of nonpremixed flame. The flame temperature began to decrease due to the convection heat loss when the flame interacted with a vortex. The investigation of the radical behavior during the flame-vortex interaction process also provided useful information on the unsteady extinction mechanism. The OH radical concentration could be used as a good tracer of the state of the unsteady extinction of nonpremixed flame. The reduction mechanism of OH concentration was confirmed by analyzing the contribution of each term in the OH species equation. At initial stage of flame-vortex interaction, the OH production and consumption rates increased gradually, while the OH concentration was kept nearly constant. Near the extinction limit, the OH production rate decreased rapidly due to the low flame temperature, and the balance between the OH production and OH consumption by diffusion could not be maintained. The unsteady nonpremixed flame interacting with a vortex under the conditions of regime (V) shown in the spectral combustion diagram [Thévenin, D., Renard, P.H., Fiechtner, G.J., Gord, J.R., Rolon, J.C., 2000. Regimes of non-premixed flame-vortex interactions. Proceedings of the Combustion Institute 28, 2101-2108.] was finally extinguished due to low reactivity, which was induced by the low flame temperature.     

Cr(Ⅵ)氧化鸡冠花红的褪色反应及其应用

在90℃的水浴加热条件下,C r(Ⅵ)能氧化鸡冠花红使其显著褪色,且褪色程度(ΔA与C r(Ⅵ)的量在一定范围内成正比关系,据此,建立了测定C r(Ⅵ)的新方法。线性范围为0~10μg/mL,表观摩尔吸光系数为2.2×104L/(m o l.cm)。方法用于镀铬溶液和铬酸钝化液中C r(Ⅵ)和C r(Ⅲ)的测定,结果满意。     

新型功能高分子材料及其应用

功能高分子是一类具有特殊用途的高分子材料 ,印迹高分子、敏感性水凝胶和固定化酶是三种较有特色的功能高分子材料。该文将对上述三种功能高分子材料以及它们在生化分离、生物催化、物质分析与检测以及药物控制释放中的应用做一介绍 ,同时也对它们的不足和发展前景进行了评述     

影响PET树脂反应活性因素的分析

探讨了影响连续固相增粘产品活性的因素，提出了控制主反应器的温度、氮气流量、基础切片的端羧基、氮气露点等主要因素，实现生产的平稳控制，从而保证产品黏度的稳定。     

Partial Oxidation of Methane to Syngas over Calcined Ni–Mg/Al Layered Double Hydroxides

The catalytic partial oxidation of CH₄ to syngas was carried out over an Ni–Mg/Al mixed-oxide catalyst prepared from layered double hydroxide-type precursors. The catalysts were characterized by XRD, TPR, UV-DRS, XRF, BET and CHNS analysis. The effects of the catalyst composition and the calcination temperature on the catalytic performance and the extent of catalyst deactivation were investigated. Ni–Mg/Al oxide catalysts converted CH₄ into syngas efficiently with high selectivity. The catalyst performance was strongly related to the Ni particle size and the calcination temperature. The catalysts that were calcined at higher temperature exhibited a better catalytic performance. In conclusion, the NiAl₂O₄ spinel phase had a positive effect on the stability of the catalyst.     

Process optimization of sweet potato pulp‐based biodegradable plastics using response surface methodology

Biodegradable plastics were produced from sweet potato pulp (SPP) and cationic starch (CS) or chitosan composite (CC) by compression molding and their mechanical properties were tested. A universal testing machine, Rockwell hardness tester, and Izod impact tester were used for testing the mechanical properties (flexural strength, Rockwell hardness, and Izod strength) of the plastics. A central composite second‐order design was used to study the effects of temperature, time, and moisture content on the flexural strength, Rockwell hardness, and Izod strength of SPP/CS and SPP/CC blended plastics. The flexural strength, Rockwell hardness, and Izod strength of SPP‐based plastics was 101.1–305.9 kg/cm², R29.0–R96.7, and 0.6–3.0 kg cm cm^?2, respectively. Regression analysis predicted the optimal mechanical properties (flexural strength, Rockwell hardness, and Izod strength) to be attained with a 150–160°C temperature, 15–20‐min reaction time, and 20–23% moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 423–434, 2002     

Preparation of zeolitic adsorbents from waste coal fly ash

Power plants burning coal generate a large amount of fly ash as waste matter. The objective of this study is to produce zeolitic adsorbents that possesses high adsorptive capacity for toxic cations. The sample was first pretreated with a High Intensity Magnetic Separator for the removal of iron and magnetic materials (mainly Fe₂O₃ and TiO₂). The zeolitic adsorbents were prepared under the various conditions of NaOH concentration (1–5 N), reaction time from 3 to 96 hours and at the various temperatures of 60, 80 and 100°C. The results of the experiment showed that the coal fly ash should be synthesized with 4 N NaOH for 48 hours at 100°C in order to have good adsorptive capacity. The zeolitic adsorbents showed higher cation exchange capacity values than the natural zeolite in removing NH ₄ ⁺ , Pb²⁺, Ca²⁺and Cd²⁺ions.     

化学镀Ni-Cu-P添加剂的研究

通过对化学镀Ni-Cu-P合金的稳定剂、表面活性剂、光亮剂对镀层性能及镀液稳定性的影响研究，得出最佳实验配方。     

Electron Emission from Barium Strontium Titanate Ceramics

This paper focuses on understanding the influence of materials' properties on the ferroelectric electron emission. Ferroelectric ( x =1.0 and 0.8) and paraelectric ( x =0.67 and 0.5) compositions of barium strontium titanate (Ba _x Sr_{(1− x )}TiO₃) system were chosen for study based on their different ferroelectric and dielectric properties. Similar emission current waveforms were obtained from four compositions with negative triggering voltage applied to the rear electrode of the samples. It was difficult to explain the experimental results using the spontaneous polarization-switching model. The mechanism of electron emission from Ba _x Sr_{(1− x )}TiO₃ ceramics was ascertained to surface plasma emission.     

Processabilities and mechanical properties of surlyn-treated starch/LDPE blends

The esterification of the hydroxyl group of starch with DuPont Surlyn was considered as pretreatment method of starch before blending with polyolefins. In treating starch with Surlyn, two different raction conditions were taken to optimize reaction conditions. First, the esterification reaction was carried out in 110°C xylene with oleic acid as a catalyst. Second, the reaction out in a 90°C mixture of deionized water and xylene with ceric ammonium nitrate(CAN) as an initiator. Starch granules would be swollen above the gelatinization temperature in water. In both cases starch was midified by Surlyn to have good compatibility with low-density polyethylene (LDPE). The mechanical and theological properties were examined for blends of the treated starch and LDPE. This system may be one of the biodegradable polymer blends that sufficiently retain properties as a packaging film.