Preparation of Pt/C cathode catalyst supported on chestnut-like mesoporous carbon for fuel cell applications

Fuel cells have received worldwide attention as a next-generation renewable energy technology. However, catalyst cost and durability are the main issue hampering the commercialization of fuel cells. Many studies have focused on the physicochemical properties of the carbon support to improve the catalyst’s properties. Mesoporous carbons are suitable candidates because of their appropriate structural characteristics, including high surface area, large pore size, and regularly interconnected mesopores that permit efficient diffusion of the reactants and by-products. In this study, supports made from chestnut-like carbon consisting of platelet carbon nanofibers were fabricated by selective catalytic gasification of activated carbon. Pt/C catalysts were synthesized from these support structures using the impregnation method. Catalyst performance and characteristics were investigated by N₂ adsorption/desorption isotherms, X-ray diffractions, and the rotating disk electrode technique for the oxygen reduction reaction.     

Simultaneous interpenetrating networks for tough matrix composites

Graphite fiber reinforced epoxy composites normally exhibit low impact strength, poor delamination resistance, and low damage tolerance. Because delamination is a matrix-dominated failure mode, tougher matrix resins may be utilized to reduce or eliminate the adverse effects of delamination on the structural integrity of fiber composites. The effects of modifying epoxy network morphology by introducing polyurethane in the form of an interpentrating network were studied. The compatibility, toughness, and tensile properties of the matrix as well as the properties of the resultant laminates were evaluated. One of the conclusions arising was that the interpenetrating network morphology results in superior resin and composites toughness with increasing polyurethane content. However, the benefits of increased resin toughness did not necessarily translate into proportionally increased composite owing to the geomertical limitations placed on the plastic deformation zones in laminates.     

Therapeutic Potential of Human Fetal Mesenchymal Stem Cells in Musculoskeletal Disorders: A Narrative Review

Mesenchymal stem cells (MSCs) have emerged as a promising therapeutic approach for diverse diseases and injuries. The biological and clinical advantages of human fetal MSCs (hfMSCs) have recently been reported. In terms of promising therapeutic approaches for diverse diseases and injuries, hfMSCs have gained prominence as healing tools for clinical therapies. Therefore, this review assesses not the only biological advantages of hfMSCs for healing human diseases and regeneration, but also the research evidence for the engraftment and immunomodulation of hfMSCs based on their sources and biological components. Of particular clinical relevance, the present review also suggests the potential therapeutic feasibilities of hfMSCs for musculoskeletal disorders, including osteoporosis, osteoarthritis, and osteogenesis imperfecta.     

Measurement of heat transfer coefficients for steam condensation on a vertical 21.5-mm-O.D. tube in the presence of air

ABSTRACT

Governing the rate of heat transport by condenser tubes in the passive containment cooling system (PCCS), the steam condensation over a vertical cylinder in the presence of air was investigated experimentally. The main objective of this study was to explore if the condensation heat transfer coefficient relies on the tube dimension, which has been a variable missed in most condensation models or has been embraced without experimental demonstration under phase change environments. The mean heat transfer coefficient was measured in the condensation test facility named JERICHO (JNU Experimental Rig for Investigation of Condensation Heat transfer On tube). The outer diameter of the condenser tube used in this study was set to 21.5 mm. The measured heat transfer coefficients were compared to those obtained from the 40-mm-O.D. tube, and a multiplier to correct the variation of the heat transfer coefficient with the tube diameter was proposed for its application to Lee correlation. The proposed correlation was further validated against another set of experimental data obtained from a separate test facility housing the 31.8-mm-O.D. tube.     

Transcriptional Profiling of Whisker Follicles and of the Striatum in Methamphetamine Self-Administered Rats

Methamphetamine (MA) use disorder is a chronic neuropsychiatric disease characterized by recurrent binge episodes, intervals of abstinence, and relapses to MA use. Therefore, identification of the key genes and pathways involved is important for improving the diagnosis and treatment of this disorder. In this study, high-throughput RNA sequencing was performed to find the key genes and examine the comparability of gene expression between whisker follicles and the striatum of rats following MA self-administration. A total of 253 and 87 differentially expressed genes (DEGs) were identified in whisker follicles and the striatum, respectively. Multivariate and network analyses were performed on these DEGs to find hub genes and key pathways within the constructed network. A total of 129 and 49 genes were finally selected from the DEG sets of whisker follicles and of the striatum. Statistically significant DEGs were found to belong to the classes of genes involved in nicotine addiction, cocaine addiction, and amphetamine addiction in the striatum as well as in Parkinson’s, Huntington’s, and Alzheimer’s diseases in whisker follicles. Of note, several genes and pathways including retrograde endocannabinoid signaling and the synaptic vesicle cycle pathway were common between the two tissues. Therefore, this study provides the first data on gene expression levels in whisker follicles and in the striatum in relation to MA reward and thereby may accelerate the research on the whisker follicle as an alternative source of biomarkers for the diagnosis of MA use disorder.     

Control of H2O generated during the CO2 hardening process in a casting mold

An additive reagent was introduced into a water glass binder system for enhancing the mechanical properties and dimension stability of a casting mold, and for improving the surface quality of a cast product. Two different processes with three different additive reagents were employed to investigate the relation between fracture strength of the mold and water (H₂O) existed in the mold. In processes I and II, the mold samples were coated with a water glass binder, and then dipped into different solutions with additive reagent after and before carbon dioxide (CO₂) hardening, respectively. The fracture strength of the mold was enhanced by reducing H₂O content in the mold, achieved by a hydrolysis reaction of additive reagents. In process I, the H₂O movement was restricted in the mold by the solid phase, converted from the water glass during CO₂ hardening. When employing process II, especially in the TEOS used as additive reagent, the fracture strength was significantly increased due to the effective reduction of H₂O content in the mold and the homogeneous generation of glass phase by a sol–gel reaction of the additives.     

Farbication of Optically Transparent Lead Magnesium Niobate Polycrystalline Ceramics Using Hot Isostatic Pressing

The physical, dielectric, and optical properties of hot isostatically pressed lead magnesium niobate polycrystalline ceramics modified with 1/2 mol% La₂O₃, Pb_{1–3/2 x} La _x □ _{x /2}-(Mg_1/3Nb_2/3)O₃, have been investigated. Methods used to characterize the ceramics included determination of the dielectric permittivity, optical transmittance, and refractive index dispersion. The materials exhibited relaxor ferroelectric type behavior with a peak dielectric constant K > 14000 and average T _c ∼−35°C. Various sintering, hot isostatic pressing, and annealing conditions were examined to produce highly dense and optically transparent materials. Through the use of hot isostatic pressing, densities more than 99.5% theoretical and transmittance greater than 50% at 633-nm wavelength were obtained. Hot isostatic pressing technique appears to be a good alternative to hot uniaxial pressing without the associated problem of PbO volatility, reactivity with the pressure vessel, and geometrical constraints.     

贵港航运枢纽船闸建筑群的雷害及其避雷措施

介绍贵港航运枢纽船闸建筑群采用头部分裂均压式新型避雷针替代原有避雷针防雷,取得了较好的防雷效果。