RADIOACTIVE OR NATURAL TRACER。TECHNIQUES FOR LEAK DETERMINING OF DAM ABUTMENT

Infiltration and localization of preferential infiltration zones at the dam abutment are measured using radioactive tracer tests of flow in boreholes,meanwhile interconnection between boreholes and the energing water points is analysed.The theory and practice of radioactive tracer synthetic detective method are described to give methods and calculation formulae used under the condition of stable flow in single well to measure permeability coefficient and hydrostatic heads.Major single hole techniques including measurement for seepage line,velocity,rate of seepage flow and relationship of recharge of groundwater in aquifers are introduced briefly.The possibilities offered by natureal tracers are analysed,uincluding electric-conduct,pH-value and temperature of water as well as stable isotopes(D,^18O) and tritium.Furthermore,the sensibilities of this theory and methods were confirmed by detecting seepage flow field of Xinanjiang Dam.     

红外测温技术在离心复合铸造轧辊生产上的应用

本文分析了离心复合铸造轧辊生产过程中离心机停机温度和时间对轧辊质量的影响 ,提出了用先进的红外测温技术来预报停机温度和时间 ,以实现微机监控适时停机 ,保证轧辊内外层熔合良好 ;同时指出了红外测温技术在离心复合铸造轧辊生产上的应用前景     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

Phase Assemblages of Pr α-sialon Derived from SHS-ed Powders and TEM Study on the Nucleation of Pr α-sialon

The Pr α-sialon powders prepared by self-propagating high-temperature synthesis (SHS), consisting of 55 wt% Pr α-sialon and 45 wt% of β-sialon (abbreviated as α' and β'), were hot-pressed at 1800°C for 1 h. The results showed that Pr α' phase would transfer to β' with the appearance of JEM phase (Pr(Si_{6− z} Al _z )(N_{10− z} O _z )) after sintering, thus resulting in the increase of β' phase to 86 wt%. The addition of Y₂O₃ into SHS-ed Pr α' powders as the starting materials restrains the transformation of α' to β' and prevents the formation of JEM phase as well. The nucleation mechanism of Pr α' grain during hot-pressing was investigated in terms of transmission electron microscope and energy-dispersive spectrometer analysis. Two nucleation modes of Pr α' grains were found, i.e., nucleating on the undissolved Pr α' grains and on the nuclei of (Pr, Y) α' grains precipitated from liquid phase.     

Inspection of Remanent Polarization in the Ferroelectric Ceramic PZT 95/5 Through Pyroelectric Effect

Shock-induced depoling of the ferroelectric (FE) ceramic PZT 95/5 is utilized in a number of pulsed power devices. Nondestructive testing of remanent polarization of PZT 95/5 is developed by pyroelectric effect in this paper. Approximately linear relation between the change of polarization during low- to high-temperature rhombohedral FE phase and the remanent polarization was found through pyroelectricity of a single piece of PZT 95/5 ceramics. The change of polarization of a prototype for shock-driven pulsed power during the FE_HT↔FE_LT phase transformation was also investigated through directly measuring the pyroelectric current. Results indicate that pyroelectric effect caused by the reversible FE_HT–FE_LT phase transition could be used as a non-destructive inspection for the remanent polarization of a prototype about shock-driven pulsed power supply.     

基于安全隔离的边界防护体系的设计与实现

本文针对电子政务信息系统的特点,设计了基于安全隔离的边界防护体系。将安全隔离技术应用到电子政务中,实现了数据的安全高效实时传输,形成了多方位的安全边界防护体系架构。     

Unified analytical solution for deep circular tunnel with consideration of seepage pressure,grouting and lining

Journal of Central South University - A new unified analytical solution is presented for predicting the range of plastic zone and stress distributions around a deep circular tunnel in a homogeneous...     

Improved Computational Model of Grid Cells Based on Column Structure

To simulate the firing pattern of biological grid cells, this paper presents an improved computational model of grid cells based on column structure. In this model, the displacement along different directions is processed by modulus operation, and the obtained remainder is associated with firing rate of grid cell. Compared with the original model, the improved parts include that: the base of modulus operation is changed, and the firing rate in firing field is encoded by Gaussian-like function. Simulation validates that the firing pattern generated by the improved computational model is more consistent with biological characteristic than original model. Besides, the firing pattern is badly influenced by the cumulative positioning error, but the computational model can also generate the regularly hexagonal firing pattern when the real-time positioning results are modified.     

用双层辉光等离子法在钛表面制备的Ti-Pd合金层性能研究

采用双层辉光等离子冶金技术在纯钛表面制备了Ti—Pd合金层。其深度大约为90μm，Pd含量呈梯度变化，并出现了TiPd3，TiPd2，Ti2Pd3，Ti3Pd5，TiPd，Ti4Pd等6种化合物相和Pd相。合金层在100℃的NaCl饱和溶液＋HCl溶液以及40℃的8．6％H2SO4溶液中的耐缝隙腐蚀性能优于Ti0．2Pd合金；在室温80％H2SO4的溶液中，腐蚀速率仅为0．682mm／a，是Ti0．2Pd合金的18．2％：在室温30％HCl的溶液中，表面Ti—Pd的腐蚀速率仅为0．004mm／a，是Ti0．2Pd合金的12．5％。     

THERMODYNAMICS AND PHASE EQUILIBRIUM OF Cu－Y－O，Cu－Y－S，Cu－Y－O－S LIQUID SOLUTIONS

ＴＨＥＲＭＯＤＹＮＡＭＩＣＳＡＮＤＰＨＡＳＥＥＱＵＩＬＩＢＲＩＵＭＯＦＣｕ－Ｙ－Ｏ，Ｃｕ－Ｙ－Ｓ，Ｃｕ－Ｙ－Ｏ－ＳＬＩＱＵＩＤＳＯＬＵＴＩＯＮＳ￥Ｄｕ，Ｔｉｎｇ；Ｌｉ，Ｇｕｏｄｏｎｇ（ＣｅｎｔｒａｌＩｒｏｎａｎｄＳｔｅｅｌＲｅｓｅａｒｃｈｉｎｓｔｉｔ...