Thermal Stability of the Pigments Hydroxysafflor Yellow A, Safflor Yellow B, and Precarthamin from Safflower (Carthamus tinctorius)

ABSTRACT Three major yellow pigments were isolated from safflower petals ( Carthamus tinctorius ) and characterized as hydroxysafflor yellow A (1), safflor yellow B (2), and precarthamin (3) by ¹H-NMR, ¹H-¹H COSY, ¹³C-NMR, HMQC, and HMBC spectral analysis. Thermal degradation reactions of 3 yellow pigments 1 to 3 at temperatures of 70 to 90 °C were carried out at different pH levels within the range of 3.0 to 10.0 by UV-vis spectral measurements. First-order reaction kinetics was observed for the degradation of safflower yellow pigments (1 to 3) at pH 3.0 and 5.0. Activation energies of thermal degradation of 1-3 at pH 5.0 were calculated as 17.0, 15.4, and 20.1 kcal/mol, respectively. At neutral and alkaline conditions, yellow pigments 1-3 did not follow simple first-order kinetics.     

Xenon ion laser-induced fluorescence using a visible tunable diode laser near 680 nm

Laser-induced fluorescence (LIF) measurements have been performed for the first time in a low temperature (Te approximately 0.6 eV) Xe plasma using a tunable diode laser in the visible range of wavelengths. The transition in Xe II involved the (3P1)5d[3]7/2 metastable state and the excitation wavelength was found to be 680.570+/-0.001 nm (air). LIF measurements of I 2 in a room temperature iodine gas cell were used to monitor the wavelength of the laser during the measurements.     

Design of a bubble collecting section in a high speed water tunnel for ventilated supercavitation experiments

Journal of Mechanical Science and Technology - The main objective of the present study is to design a bubble collecting section for use in ventilated supercavitation experiments. The large amounts...     

Anti-inflammatory and anti-genotoxic activity of branched chain amino acids (BCAA) in lipopolysaccharide (LPS) stimulated RAW 264.7 macrophages

Food Science and Biotechnology - The purpose of this study was to evaluate the anti-inflammatory and anti-genotoxic activity of branched-chain amino acids (BCAAs) in lipopolysaccharide (LPS)...     

Principled analytic classifier for positive-unlabeled learning via weighted integral probability metric

Machine Learning - We consider the problem of learning a binary classifier from only positive and unlabeled observations (called PU learning). Recent studies in PU learning have shown superior...     

Microstructural and piezoelectric properties of low temperature sintering PMN-PZT ceramics with the amount of Li2CO3 addition

PMN-PZT ceramics doped with Li₂CO₃ and Bi₂O₃ as sintering aids were manufactured in order to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, and their micro structural, dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of doped PMN-PZT ceramics due to the effect of LiBiO₂ liquid phase. Optimal values for multilayer piezoelectric transformer application, such as electromechanical coupling factor (k_p) of 0.50, mechanical quality factor (Q_m) of 2264, and dielectric constant (K) of 1216, and curie temperature (T_c) of 317 °C were found at 0.1 wt.% Li₂CO₃ added ceramics sintered at 940 °C.     

Realization of Epitaxial Thin Films of the Topological Crystalline Insulator Sr3SnO

Topological materials are derived from the interplay between symmetry and topology. Advances in topological band theories have led to the prediction that the antiperovskite oxide Sr₃SnO is a topological crystalline insulator, a new electronic phase of matter where the conductivity in its (001) crystallographic planes is protected by crystallographic point group symmetries. Realization of this material, however, is challenging. Guided by thermodynamic calculations, a deposition approach is designed and implemented to achieve the adsorption-controlled growth of epitaxial Sr₃SnO single-crystal films by molecular-beam epitaxy (MBE). In situ transport and angle-resolved photoemission spectroscopy measurements reveal the metallic and electronic structure of the as-grown samples. Compared with conventional MBE, the used synthesis route results in superior sample quality and is readily adapted to other topological systems with antiperovskite structures. The successful realization of thin films of Sr₃SnO opens opportunities to manipulate topological states by tuning symmetries via strain engineering and heterostructuring.     

Atomic Layer Deposition‐Assisted Fabrication of Co‐Nanoparticle/N‐Doped Carbon Nanotube Hybrids as Efficient Electrocatalysts for the Oxygen Evolution Reaction

Transition metal (TM)‐based carbon hybrids have numerous applications in the field of regenerative electrochemical energy. The synergetic effects of high conductivity of carbon supports and abundant catalytic active sites in TMs make these hybrids promising oxygen evolution reaction (OER) electrocatalysts. However, strategies for modulating the catalytic active species in the above hybrids are limited despite being highly sought after. Furthermore, the exact roles of chemical species in the hybrids (e.g., N, C, or TM) mainly responsible for this high OER performance remain unknown. Herein, an innovative approach based on atomic layer deposition is developed to tune the true active species in Co nanoparticle/N‐doped carbon nanotube (Co/N‐CNT) hybrids. Specifically, the configuration predominantly promoting water oxidation in an alkaline medium is identified as pyridinic N–Co–C. Furthermore, a physicochemical intact interface between metallic Co nanoparticles and conductive N‐CNTs is demonstrated to induce synergetic effects for accelerating charge transfer and enhancing electrocatalytic activity as well as stability in the hybrid catalysts. The optimized hybrid catalyst is revealed to exhibit outstanding alkaline OER activity and stability, outperforming RuO₂, a benchmark novel OER electrocatalyst.     

Encapsulation of Nanoparticles Using Nitrilotriacetic Acid End‐Functionalized Polystyrenes and Their Application for the Separation of Proteins

The use of nitrilotriacetic acid end‐functionalized polystyrenes (NTA‐PS) as a multifunctional nanocarrier for the aqueous dispersion of CdSe, γ‐Fe₂O₃ and gold nanoparticles (NPs) is described. When the amphiphilic end‐ functionalized polystyrenes and NPs are dissolved together in tetrahydrofuran, the addition of water causes the spontaneous formation of micellar aggregates, resulting in the successful encapsulation and aqueous dispersion of NPs. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy, and vibrating sample magnetometer (VSM) are used to characterize the structure and properties of the NPs‐containing micellar aggregates (nanocarrier). After complexation of Ni²⁺ with NTA on the surface of the nanocarrier containing γ‐Fe₂O₃, specific binding between Ni‐NTA complex and histidine‐tagged (His‐tagged) proteins enables selective separation of His‐tagged proteins using a magnet.     

Excellent Switching Uniformity of Cu-Doped $hbox{MoO}_{x}/hbox{GdO}_{x}$ Bilayer for Nonvolatile Memory Applications

We have investigated a Cu-doped MoO_x/GdO_x bilayer film for nonvolatile memory applications. By adopting an ultrathin GdO_x layer, we obtained excellent device characteristics such as resistance ratio of three orders of magnitude, uniform distribution of set and reset voltages, switching endurance up to 10⁴ cycles, and ten years of data retention at 85degC. By adopting bilayer films of Cu-doped MoO_x/GdO_x, a local filament was formed by a two-step process. Improved memory characteristics can be explained by the formation of nanoscale local filament in the ultrathin GdO_x layer.