Detailed kinetic study of anisole pyrolysis and oxidation to understand tar formation during biomass combustion and gasification

Anisole was chosen as the simplest surrogate for primary tar from lignin pyrolysis to study the gas-phase chemistry of methoxyphenol conversion. Methoxyphenols are one of the main precursors of PAH and soot in biomass combustion and gasification. These reactions are of paramount importance for the atmospheric environment, to mitigate emissions from wood combustion, and for reducing tar formation during gasification. Anisole pyrolysis and stoichiometric oxidation were studied in a jet-stirred reactor (673–1173 K, residence time 2 s, 800 Torr (106.7 kPa), under dilute conditions) coupled with gas chromatography–flame ionization detector and mass spectrometry. Decomposition of anisole starts at 750 K and a conversion degree of 50% is obtained at about 850 K under both studied conditions. The main products of reaction vary with temperature and are phenol, methane, carbon monoxide, benzene, and hydrogen. A detailed kinetic model (303 species, 1922 reactions) based on a combustion model for light aromatic compounds has been extended to anisole. The model predicts the conversion of anisole and the formation of the main products well. The reaction flux analyses show that anisole decomposes mainly to phenoxy and methyl radicals in both pyrolysis and oxidation conditions. The decomposition of phenoxy radicals is the main source of cyclopentadienyl radicals, which are the main precursor of naphthalene and heavier PAH in these conditions.     

Development of a laboratory scale clean-in-place system to test the effectiveness of "natural" antimicrobials against dairy biofilms

A laboratory scale system, partially reproducing dairy plant conditions, was developed to quantify the effectiveness of chlorine and alternative sanitizers in reducing the number of viable bacteria attached to stainless steel surfaces. Stainless steel tubes fouled in a continuous flow reactor were exposed to a standard clean-in-place regime (water rinse, 1% sodium hydroxide at 70 degrees C for 10 min, water rinse, 0.8% nitric acid at 70 degrees C for 10 min, water rinse) followed by exposure to either chlorine (200 ppm) or combinations of nisin (500 ppm), lauricidin (100 ppm), and the lactoperoxidase system (LPS) (200 ppm) for 10 min or 2, 4, 8, 18, or 24 h. There was significant variation in the effectiveness of the alkaline-acid wash steps in reducing cell numbers (log reduction between 0 and 2). Following a 10-min treatment, none of the sanitizers significantly reduced the number of attached cells. Two hours of exposure to chlorine, nisin + the LPS, or lauricidin + the LPS achieved 2.8, 2.2, and 1.6 log reductions, respectively. Exposure times > 2 h did not further decrease the number of viable bacteria attached to the stainless steel. The effectiveness of combinations of nisin, lauricidin, and the LPS was similar to that of chlorine (P > 0.05), and these sanitizers could be used to decontaminate the surfaces of small-volume or critical hard-to-clean milk processing equipment.     

The impact of industrial processing on health-beneficial tomato microconstituents

The effect of industrial processing was investigated on the stability of tomato carotenoids, phenolic compounds and ascorbic acid. A deep insight in the processed products allowed the quantification of caffeic acid hexosides, which are far more important contributors than the well-known chlorogenic acid, dicaffeoylquinic acids and quercetin oligosaccharides (new feruloyl, sinapoyl and syringoyl derivatives of quercetin apiosylrhamnosylglucoside). (E)-β-Carotene and (E)-lycopene were also quantified along with different mono- and di-(Z)-isomers of lycopene which were tentatively assigned. Processing of fresh tomato into paste had an overall positive effect on the contents in phenolic compounds, no effect on lycopene and a slight and high detrimental effect on β-carotene and ascorbic acid, respectively. The balance between the increase in tomato matrix extractability and microconstituent catabolism was further observed in two contrasted transformations of paste into sauce. Overall, the nutritional quality of tomato-processed products, except for ascorbic acid, is mainly preserved through manufacture.     

Monitoring dry period intramammary infection incidence and elimination rates using somatic cell count measurements

The objective of the study was to evaluate the predictive ability of the herd dry period (DP) intramammary infection (IMI) incidence and elimination rates derived from predry and postcalving somatic cell count (SCC) measurements [quarter-level SCC and dairy herd improvement (DHI) composite-level SCC] for monitoring the herd DP IMI incidence and elimination rates. A cohort of 91 Canadian dairy herds was followed from 2007 to 2008. In each herd, a sample of 15 cows was selected each year, and a series of 2 predry and 2 postcalving quarter milk samples were collected. Routine milk bacteriological culture was conducted to identify IMI, SCC was measured on the quarter milk samples, and composite SCC of the last predry and first postcalving DHI tests were obtained. Mastitis pathogens were grouped into 3 categories: major pathogens, minor pathogens, and any pathogens. For each herd, DP bacteriological culture-derived IMI incidence and elimination rates were computed using quarter milk culture data. Similarly, SCC-derived herd incidence and elimination rates were computed using quarter and DHI composite-level SCC measurements and using various SCC thresholds to define new and eliminated IMI. Linear regression was used to compare herd quarter-level and composite-level SCC-derived herd incidence and elimination with DP bacteriological culture-derived IMI incidence and elimination. Herd DP incidences computed by using quarter-level SCC, and with most of the SCC thresholds tested, were significant predictors of the DP major, minor, and any IMI incidences (F-test; P ≤ 0.05). The highest coefficients of determination (R²) were obtained with thresholds of 200,000 (R²: 12%) and 50,000 cells/mL (R²: 25%) for predicting major and minor IMI, respectively. When using composite DHI SCC measurements, however, substantial losses of predictive power were seen for minor and any IMI incidences compared with quarter-level SCC. For DP major IMI incidence, composite SCC yielded similar, but modest, predictive power when a cutoff value of 150,000 cells/mL was chosen to define new IMI. To predict DP elimination rates, the value of quarter-level SCC seemed limited to predicting the DP major IMI elimination rate. Composite SCC, on the other hand, showed modest predictive power for major and minor IMI elimination rates, with thresholds of 200,000 and 50,000 cells/mL, respectively. Results from the current study suggest that quarter and composite SCC-derived rates could be used as substitutes for bacteriological culture-derived rates for some groups of mastitis pathogens.     

Two-photon excitation fluorescence microscopy with a high depth of field using an axicon

In conventional two-photon excitation fluorescence microscopy, the numerical aperture of the objective determines the lateral resolution and the depth of field. In some situations, as with functional imaging of dynamic events distributed in live biological tissue, an improved temporal resolution is needed; as a consequence, it is imperative to use optics with a high depth of field to simultaneously image objects at different axial positions. With a conventional microscope objective, increasing the depth of field is achieved at the expense of lateral resolution. To overcome this limitation, we have incorporated an axicon in a two-photon excitation fluorescence microscopy system; measurements have shown that an axicon provides a depth of field in excess of a millimeter, while the lateral resolution is maintained at the micrometer scale. Thus axicon-based two-photon microscopy has been shown to yield a high-resolution projection image of a sample with a single 2D scan of the laser beam while maintaining the improved tissue penetration typical of two-photon microscopy.     

Physicochemical and Stability Characteristics of Flaxseed Oils During Pan-heating

Flaxseed oils are used in stir-frying in parts of China. In this study, flaxseed oils were heated at approximately 150 °C as a thin film in a frying pan for 3 and 6 min, respectively. Pan-heating caused loss of tocopherols, plastochromanol-8, phenolic acids and chlorophyll pigments. There was a significant decrease in the linolenic acid resulting in a concomitant relative increase in palmitic, stearic, oleic and linoleic acids in the oils after pan heating. Positive CIELAB “b*” color value, which indicates yellowness and levels of β-carotene and lutein in these oils showed a 42–56% and 8–53% decrease, respectively. Peroxide values, p-anisidine values, percentage of conjugated dienoic acid, specific extinction at 232 and 270 nm and food oil sensor readings of these oils showed significant increases to levels exceeding good oil quality indices. Acid values only showed one to twofold increase from fresh oil values of 0.65–2.23 mg KOH/g of sample. These results indicate that significant levels of oxidation products would be present in flaxseed oils after pan heating. The flaxseed oil with a lower amount of PUFA appeared to be more degraded suggesting that the major factor affecting the oxidative stability of the flaxseed oils during pan-heating was not the degree of unsaturation but was dependent on the complex interaction between the fatty acids and minor constituents in the oils. Presented at the American Oil Chemists’ Society 97th Annual Meeting & Expo, St. Louis, MO, 30 April–3 May, 2006.     

Polyaniline‐coated PET conductive yarns: Study of electrical,mechanical, and electro‐mechanical properties

Intelligent and multifunctional yarns (textiles) have attracted interest because of their high potential in applications such as flexible displays, batteries, or sensors. The main objective of our research was to obtain the flexible and electrically conducting yarn based on the conductive polymer and polyethylene terephtalate (PET) yarns. Among the conductive polymers, polyaniline (PANI) is considered as a promising material and is well adapted for modifications of textile structure because of its excellent environmental, thermal, and chemical stability. Chemical PANI coating on PET yarns was performed by absorption of yarns through PANI solution. The electrical, mechanical, and electro‐mechanical properties of PET conductive yarns prepared were investigated. The environmental effects on the electrical and mechanical properties of the obtained conductive yarns were also studied. These conductive yarns are expected to be used as fibrous sensors, connection devices in smart clothing, and for electromagnetic shielding applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1252–1256, 2006     

Control Engineering in Drying Technology: Review and Trends

This article aims at promoting cooperation between drying and control communities in the future. Indeed, with a review of 71 relevant publications all dealing with control aspects in drying, this article shows that the use of control tools really started to emerge in drying applications only since 1979. In a second phase started around 1998, new trends based on more advanced concepts have also appeared in drying control. This article clearly shows that control in drying is more and more a reality and that many opportunities exist to enhance industrial performance via efficient control of the operation.     

Optical Coherence Tomography for the Inspection of Plasma-Sprayed Ceramic Coatings

Optical coherence tomography (OCT) is evaluated as a potential technique for microstructure characterization of plasma-sprayed ceramic coatings. OCT combines the principles of low-coherence interferometry and optical heterodyne detection to obtain both a high axial resolution and a high sensitivity to weakly backscattered light. It can be used to accurately locate interfaces where the refractive index changes abruptly within translucent materials. Therefore, OCT should be sensitive to interlamellar pores and splat interfaces within plasma-sprayed ceramic coatings. In the present work, OCT cross-sectional images of thin yttria-stabilized zirconia (YSZ) coatings are considered. The interferogram envelopes forming the collected images are analyzed individually to successfully gather information related to light attenuation inside the coatings. This light attenuation is shown to be related to the density of interfaces within the coatings as well as to the material oxidation state. The envelope analysis also allows the evaluation of the refractive index of the YSZ nontransformable tetragonal phase.