Chelated alkoxyalumoxanes and a silica-free binder based on them

Chelated alkoxyalumoxane oligomers have been synthesized through consecutive hydrolysis and alcoholysis of organoaluminum compounds stabilized by compounds capable of keto-enol tautomerism. The chelated alkoxyalumoxanes were used to prepare a silica-free binder for the fabrication of heat-resistant (up to 2050°C), chemically inert corundum ceramic composites. The likely structures of the synthesized preceramic alumoxane oligomers were inferred from physicochemical characterization results (¹H, ¹³C, and ²⁷Al NMR, IR spectroscopy, mass spectrometry, gel-permeation chromatography, thermal analysis, and elemental analysis).     

Viscous and Aeroelastic Effects on Wind Turbine Blades. The VISCEL project. Part I: 3D Navier–Stokes Rotor simulations

Aerodynamic modelling of HAWT rotors by means of “engineering methods” has reached a saddle point, where no further development can be expected without a breakthrough in understanding the physics of unsteady, rotating three‐dimensional flows. However, such a breakthrough becomes ever more necessary, as the size of the wind turbines increases. With the experimental work in that direction being mostly limited to observing the phenomena and interpreting the associated mechanisms, and its increased cost, alternatives are being sought. The use of CFD techniques and state‐of‐the‐art Navier–Stokes solvers is considered a very serious contender, a belief shared by the members of the present consortium, which has worked on the VISCEL JOR3‐CT98‐0208 Joule III project. This project's goal was to determine the aerodynamic characteristics as well as the aeroelastic behaviour of wind turbine blades across their broad range of operational conditions, from attached to highly separated flow regimes. The work programme included specific tasks for the validation and assessment of existing 3D solvers, for the parametric study of 3D flow around realistic blades and for the investigation of aeroelastic stability, at the blade section level. Copyright © 2003 John Wiley & Sons, Ltd.     

A high-capacity broadband packet switch architecture based on a multilink approach

Broadband packet networks based on asynchronous transfer mode (ATM) are expected to provide a wide range of services, including motion video, voice, data and image. When these networks become prevalent, some applications such as motion video and high-speed LAN interconnections will place a very large bit rate requirement on the channels. Currently, the physical layer supported by the synchronous optical network (SONET) allows the transmission of up to 2.4 Gbit/s with the OC-48 optical interface. However, it is not feasible for the electronic packet switch to route packets at this rate on a single link. In this paper we present a design of a broadband packet switch that uses multiple links in parallel to realize a high-speed channel. This implementation permits the switch to operate at the lower link rate, which can be at 150 Mbit/s, while having the ability to support a virtual circuit at a higher rate (up to 2.4 Gbit/s). The main contribution of the design is that packet sequence on a channel is still maintained even though packets are allowed to use any of the links belonging to the same channel. Besides allowing the switch to function at a slower rate than the transmission channel rate, the implementation of the multilinks benefits from statistical multiplexing gain. Analytical results show the performance advantages of multilink design with respect to delay, throughput and packet loss probability.     

Tc(VII) Sorption by Fibrous Sorbents

It is shown that technetium can be extracted from acidic media by the fibrous complexing sorbent POLIORGS 35, containing hydrazidine groups, and from neutral and nitric-acid solutions with a complex salt composition (with nitrate-ion concentration not exceeding 10 g/liter) by strongly basic anionite POLIORGS AV-17 with quaternary ammonium bases. The effect of the pH of the solutions on the sorption of technetium is studied. It is shown that the sorption depends on the nature and concentration of the salt background of the solutions. The kinetics and mechanism of sorption of technetium by fibrous sorbents and the possibility of their desorption and reuse in sorption–desorption cycles are investigated. It is shown that the fibrous sorbents POLIORGS 35 and POLIORGDS AV-17 are promising for extracting technetium from waters with a high mineral content (up to 20 g/liter).     

Quantitative Analysis of Structural Changes in Steel Caused by High-Temperature Holding in Hydrogen

We give a quantitative estimate of changes in the structure of 15Kh2MFA steel after its long-term exposure to the combined action of high temperature, tensile stresses, and hydrogen as the factors of degradation of this steel under conditions of oil hydrocracking. Under laboratory conditions, we study the effect of high-temperature hydrogen degradation of 15Kh2MFA heat-resistant steel on changes in the quantitative characteristics of its structural elements, in particular, in the dimension and average distance between carbides as well as in their orientation from one grain to another. Algorithms for the solution of the formulated problems are described, and the possibilities of proposed approaches for the quantitative automatic processing of metallographic images are shown.     

Primer-induced labeling of pea and field bean chromosomes in situ and in suspension

A protocol for primed in situ DNA labeling (PRINS) was optimized for pea (Pisum sativum L.) and field bean (Vicia faba L.) chromosomes attached to coverslips. Cloned DNA or synthetic oligonucleotides were used as probes for repetitive DNA sequences (rDNA, Fok-element) and different reaction conditions were tested to achieve the highest specific signal-to-background ratio. A procedure based on direct labeling by fluorescein-dUTP was compared with an indirect one using digoxigenin detected by fluorescently labeled antibody. Under optimal conditions, strong and specific signals were obtained exclusively on chromosome regions known to contain respective DNA sequences. Compared to the direct labeling, significantly stronger signals were obtained when the indirect procedure was used. Both types of labeling were successfully applied to chromosomes in suspension and were shown to produce signals comparable to that obtained with chromosomes attached to coverslips. It is expected that primed in situ DNA labeling en suspension (PRINSES) will provide a basis for flow-cytometric discrimination and sorting of otherwise indistinguishable chromosomes according to their specific fluorescent labeling.     

Hierarchical Self‐Assembly of Peptide‐Coated Carbon Nanotubes

Numerous applications, from molecular electronics to super‐strong composites, have been suggested for carbon nanotubes. Despite this promise, difficulty in assembling raw carbon nanotubes into functional structures is a deterrent for applications. In contrast, biological materials have evolved to self‐assemble, and the lessons of their self‐assembly can be applied to synthetic materials such as carbon nanotubes. Here we show that single‐walled carbon nanotubes, coated with a designed amphiphilic peptide, can be assembled into ordered hierarchical structures. This novel methodology offers a new route for controlling the physical properties of nanotube systems at all length scales from the nano‐ to the macroscale. Moreover, this technique is not limited to assembling carbon nanotubes, and could be modified to serve as a general procedure for controllably assembling other nanostructures into functional materials.     

The giant dispersion of critical currents in a superconductor with fractal clusters of a normal phase

The influence of fractal clusters of a normal phase on the dynamics of a magnetic flux trapped in a percolation superconductor is considered. The critical depinning current distribution and the current-voltage characteristics of fractal superconducting structures in the resistive state are determined for an arbitrary fractal dimension of the cluster boundaries. The interval of fractal dimensions is found in which the dispersion of critical currents exhibits unlimited growth. It is established that the fractality of clusters favors a decrease of the electric field arising during the magnetic flux motion, thus increasing the critical current value. The region featuring the giant dispersion of critical currents can be expected to provide for the maximum current-carrying capacity of a superconductor.