Artificial neural networks for coordination and control: The portability of experiential representations

It is time to locate connectionist representation theory in the new wave of robotics research. The utility of representations developed in artificial neural networks (ANNs) during learning has been demonstrated in cognitive science research since the 1980s. The research reported here puts learned representations to work in a decentered control task, the disembodied arm problem, in which a mobile robot operates an arm fixed to a table to pick up objects. There is no physical linkage between the arm and the robot and so the robot's point of view must be decentered. This is done by developing a modular Artificial Neural Net system in three stages: (i) a classifier net is trained with laser scan data to output transformationally invariant position classes; (ii) an arm net is trained for picking up objects; (iii) an inter net is trained to communicate and coordinate the sensing and acting. The completed system is shown to create new nonsymbolic transformationally invariant representations in order to perform the effective generalization of decentered viewpoints.     

Effect of hygiene measures, water sanitation and oral rehydration therapy on diarrhea in children less than five years old in the south of Ivory Coast

BACKGROUND: Gastric sucrose permeability is a noninvasive marker that reliably increases in association with gastrointestinal injury due to use of nonsteroidal antiinflammatory drugs. Despite the effect of Helicobacter pylori infection on the gastric mucosa, in a previous study we were unable to demonstrate that H. pylori infection was associated with abnormal gastric sucrose permeability. Our goal in this study was to explore further whether H. pylori infection changed gastric permeability; therefore, we evaluated the effect of treatment of H. pylori infection on gastric permeability to sucrose and the relation of sucrose permeability to density of polymorphonuclear leukocytes. MATERIALS AND METHODS: Five hundred milliliters of a solution containing 100 gm of sucrose was ingested by the subject at bedtime. Overnight urine was collected and assayed for sucrose by high-performance liquid chromatography. Sucrose permeability was assessed both before and approximately 4 weeks after anti-H. pylori therapy. RESULTS: Seventeen asymptomatic H. pylori-infected volunteers participated; 8 were cured. Sucrose permeability was in the range commonly found in normal controls both before and after anti-H. pylori therapy (mean excretion, 76.3 mg; range, 13-171 mg). Gastric sucrose permeability correlated with the density of polymorphonulcear cell infiltration of the mucosa. Cure of the H. pylori infection was associated with a small but significant decrease in sucrose permeability (98.8 +/- 18 mg to 51.7 +/- 9.8 mg (p = .01). Sucrose permeability was greater in those with a high density of mucosal polymorphonuclear cells compared to those with lower scores (119.5 +/- 4 vs 71.4 +/- 13 for those with scores > or = 5 compared to scores < or = 4; p = .023). Failed therapy resulted in an increase in the mucosal density of polymorphonuclear infiltration and sucrose permeability (56.4 +/- 13 mg-99.7 +/- 19 mg pretreatment vs posttreatment, respectively; p = .031). CONCLUSION: H. pylori gastritis causes a small but measurable increase in gastric permeability to sucrose that may reflect epithelial transmigration of neutrophils.     

Magnet Safety Assessment for ITER

The ITER magnet system consists of structurally linked sets of toroidal (TF) and poloidal (PF) field coils, central solenoid (CS), and various support structures. The coils are superconducting, force flow Helium cooled with a Kapton-Glass-Epoxy multilayer insulation system. The stored magnetic energy is about 100GJ in the TF system and 20GJ in the PF-CS. Coils and structure are maintained at 4 K by enclosing them in a vacuum cryostat. The cryostat, comprising an outer envelope to the magnets, forms most of the second radioactivity confinement barrier. The inner primary barrier is formed by the vacuum vessel, its ports and their extensions. To keep the machine size within acceptable bounds, it is essential that the magnets are in close proximity to both of the nuclear confinement barriers. The objective of the magnet design is that, although local damage to one of the barriers may occur in very exceptional circumstances, large scale magnet structural or thermal failure leading to simultaneous breaching of both barriers is not credible. Magnet accidents fall into three categories: thermal (which includes arcing arising from insulation failure and local overheating due to discharge failure in the event of a superconductor quench), structural (which includes component mechanical failure arising from material inadequacies, design errors and exceptional force patterns arising from coil shorts or control failures), and fluid (Helium release due to cooling line failure). After a preliminary survey to select initial faults conceivable within the present design, these faults are systematically analyzed to provide an assessment of the damage potential. The results of this damage assessment together with an assessment of the reliability of the monitoring and protective systems, shows that the magnets can operate with the required safety condition.     

Positive temperature dependence of the electron impact ionizationcoefficient in In0.53Ga0.47As/InP HBTs

Impact ionization is a major limiting factor to the maximum operating voltage of InGaAs-based, high-speed transistors. In this work, data on the positive temperature dependence of the electron impact ionization coefficient α_n in In_0.53Ga_0.47As at medium-low electric fields are reported for the first time. The increase of α_n with temperature is opposite to the behavior normally observed in most semiconductors. This anomalous behavior implies the onset of a positive feedback between power dissipation and avalanche generation which may adversely affect the power handling capability of In_0.53Ga _0.47As-based devices, and which should be taken into account in device thermal modeling. In the experimental procedure, based on the measurement of the multiplication factor M-1 in npn In_0.53Ga _0.47As/InP Heterojunction Bipolar Transistors (HBT), particular care has been taken in order to rule out possible spurious, temperature-dependent contributions to the measured multiplication current     

A fully soft-switched extended-period quasi-resonantpower-factor-correction circuit

This paper presents the design criteria, procedure, and implementation of a soft-switched power-factor-correction (PFC) circuit based on the extended-period quasi-resonant (EPQR) principles. All power electronic devices including switches and diodes in the circuit are fully soft switched. The design method is demonstrated in a prototype circuit. The operating principles are confirmed with computer simulation and experimental results. A comparison of the EP-QR operation and zero-voltage-transition (ZVT) pulse-width modulation (PWM) method     

Densification involved in the UV-based photosensitivity of silicaglasses and optical fibers

A comprehensive survey of photosensitivity in silica glasses and optical fiber is reviewed. Recent work on understanding the mechanisms contributing to germanium or aluminum doped fiber photosensitivity is discussed within the framework of photoelastic densification models     

Evaluating the impact of CASE: an empirical comparison of retrospective and cross-sectional survey approaches

The purpose of this paper is to evaluate two methods of assessing the productivity and quality impact of Computer Aided Software Engineering (CASE) and Fourth Generation Language (4GL) technologies: (1) by the retrospective method; and (2) the cross-sectional method. Both methods involve the use of questionnaire surveys. Developers' perceptions depend on the context in which they are expressed and this includes expectations about the effectiveness of a given software product. Consequently, it is generally not reliable to base inferences about the relative merits of CASE and 4GLs on a cross-sectional comparison of two separate samples of users. The retrospective method that requires each respondent to directly compare different products is shown to be more reliable. However, there may be scope to employ cross-sectional comparisons of the findings from different samples where both sets of respondents use the same reference point for their judgements, and where numerical rather than verbal rating scales are used to measure perceptions.     

Electrical linewidth test structures fabricated in monocrystallinefilms for reference-material applications

The physical widths of reference features incorporated into electrical linewidth test structures patterned in films of monocrystalline silicon have been determined from Kelvin voltage measurements. The films in which the test structures are patterned are electrically insulated from the bulk-silicon substrate by a layer of silicon dioxide provided by SIMOX (Separation by the IMplantation of OXygen) processing. The motivation is to facilitate the development of linewidth reference materials for critical-dimension (CD) metrology-instrument calibration. The selection of the (110) orientation of the starting silicon and the orientation of the structures' features relative to the crystal lattice enable a lattice-plane-selective etch to generate reference-feature properties of rectangular cross section and atomically planar sidewalls. These properties are highly desirable for CD applications in which feature widths are certified with nanometer-level uncertainty for use by a diverse range of CD instruments. End applications include the development and calibration of new generations of CD instruments directed at controlling processes for manufacturing devices having sub-quarter-micrometer features