Ozone measurement in visible region: an optical fibre sensor system

Ozone measurement based on the optical absorption of visible light at 603 nm using polymer optical fibres is investigated and tested. Comparisons with a commercial UV based sensor demonstrate the ability of the visible based sensor to measure high concentrations over a range 27-127 mg/litre. A resolution of 5 mg/litre is also demonstrated for this sensor.     

Analysis of the possibility of implementing the principle of redistribution of concentration fields for reactive distillation processes

The evolution of the phase portrait for the dynamic system of open evaporation combined with a chemical reaction for a fixed liquid amount was studied as dependent on the rate constants of the reaction. A three-component azeotropic mixture whose vapor-liquid equilibrium diagram is characterized by two distillation regions was considered. The possibility of the open evaporation trajectory to transfer through the separatrix between the distillation regions was shown, as well as the possibility of implementing the principle of redistribution of the concentration fields due to chemical reactions occurring in reactive distillation columns.Translated from Teoreticheskie Osnovy Khimicheskoi Tekhnologii, Vol. 39, No. 2, 2005, pp. 115–119.Original Russian Text Copyright © 2005 by Solokhin, Nazanskii, Timofeev.     

Mechanical equipment of the Tashlyk pumped-storage hydroelectric station and Aleksandrovka hydro development of the Southern Ukraine power complex

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 11, pp. 6–7, November, 1989.     

Parametric modeling of somatosensory evoked potentials

In this paper, we examine methods of characterizing somatosensory evoked potentials (SEP's) in both the time and frequency domains. We have found that the truncated impulse response (TIR) method produced an accurate time domain model of the SEP signals at model orders greatly reduced from the original state space matrix. The TIR method was valuable for smoothing signals that were slightly corrupted by noise. In this case, the simulated data sequence was close to the original data sequence in the mean squared error sense. For signals that were greatly corrupted by noise, the TIR method was not able to perform as well. Therefore, the TIR method was not a feature extraction method but was valuable for data simulation. In the frequency domain, we have used the autoregressive moving average model (ARMA) to parameterize the SEP signal. An overdetermined set of Yule-Walker equations was created to determine the autoregressive (AR) parameters of the original data with the model order established by the singular value decomposition. From these AR parameters, a residual time series was generated which was used to find the moving average parameters. The resulting ARMA model was used to produce a simulated data sequence. The frequency domain characteristics of the simulated sequence and the corresponding power spectral density of the ARMA filter were very close to the periodogram of the original data sequence. Accurate parameterization was achieved for the SEP waveforms at low filter lengths.     

Biochemical oxidation of caprolactam-containing wastewater from the production of synthetic fibres

Conclusions The chemical mutagenesis method is recommended for use in local purification installations for cleaning up of caprolactam-containing wastewater.Use of this method permits one to carry out a biochemical clean-up of wastewater having a caprolactam content up to 600 mg/liter while increasing the oxidative power of the aeration tank by a factor of two.Translated from Khimicheskie Volokna, No. 6, p. 46, November–December, 1985.     

Convective transfer processes in chemically stable and reacting liquids with an internal structure

Dynamic processes are studied in media with softly and hardly internal destroyable configurations. A method is examined for the measurement of properties of media with spatial separation of the chemical transformation stages and thermal hydrodynamic measurements.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 781–789, November, 1987.     

Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.     

Kinetics of small fatigue cracks in steel during cyclic loading

The kinetics of development of fatigue microcracks in a high-strength 08Kh14AN4MD steel is studied when a cantilever specimen with several notches is subjected to rotational bending tests. The specific feature of the tests consists in the fact that, when the specimen is loaded at a constant load, different stress amplitudes are realized in different notches. As a result, after the sample has failed across the section with the maximum stress, a longitudinal polished section of the specimen contains fatigue cracks having nucleated in the mouths of the other notches at lower stress amplitudes. A relation between inflection points in the fatigue curve and the conditions of local and developed yield in a notch has been established. Fatigue fracture mechanisms at a superhigh number of loading cycles are studied, and their relation to the structure near a crack is found. A rapid method for estimating the fatigue limit at a superhigh number of loading cycles is proposed.