Study of the effect of γ-dose rate on the oxidation of polypropylene

Polypropylene PP (high and low crystallinity) was λ-oxidized, in the presence of air, using different dose rates (from 2 to 100 rad/s). Oxidation outcomes were identified and quantified by FTIR spectroscopy coupled with derivatization reactions (NO and SF₄). The difficulty to separate secondary and tertiary hydroperoxides from FTIR measurements after NO treatment was addressed. Polymer physical degradation was also monitored during the λ-irradiation process. GPC was used to follow molecular weight changes and tensile tests for elongation at break modifications. Comparison of the extent of oxidation product for-mation over λ-irradiation allowed us to investigate the importance of λ-dose rate on chemical and physical changes of PP. From this, different mechanisms of ketone and ester formation were examined; relationship between the molecular weight changes and the elongation at break modifications was also investigated. © 1996 John Wiley & Sons, Inc.     

Development and evaluation of surface treatments to enhance the fiber-matrix adhesion in PAN-based carbon fiber/liquid crystal polymer composites. Part I: Coupling agent and amine surface treatments

Several surface treatments, using both commercially available coupling agents and reagents containing multiple amines, were applied to commingled continuous as-received AS4 carbon reinforcing fiber/liquid crystal polymer (LCP) matrix fibers. Unidirectional composites (normally 60 vol% carbon fiber) were prepared from as-received and treated commingled fibers and characterized. To estimate the effect the effect of the treatments on fiber-matrix adhesion, short beam shear (SBS) tests were conducted, the failure surfaces were examined, and spectroscopic studies wee performed. The mean SBS strength of the as-received unidirectional AS4 carbon fiber/LCP matrix composite system was 49 MPa. The best coupling agent and amine treatments yielded increases in composite shear strength of ∼ 10 to 20%, relative to the as-received AS4/LCP system. For the amine treatments, ESCA and FTIR analyses suggested of both the carbon and LCP fibers may have caused the increased adhesion. Moreover, SEM analysis of the failure surfaces of SBS specimens from composites prepared with the treated fibers may have caused the increased adhesion. Moreover, SEM analysis of the failure surfaces of SBS specimens from composites prepared with the treated fibers (both with coupling agents and amines) showed that strong fiber-matrix adhesion was present. That is, failure occurred in the LCP matrix material.     

Critical speeds for a flexible spinning disk

A flexible uniform elastic disk is clamped at its inner radius and rotates at constant speed. It is shown that certain critical speeds exist at which the spinning disk is unable to support arbitrary spatially fixed transverse loads. These critical speeds are in the range of rotational speeds relevant in certain floppy disk magnetic recording applications. It is then shown that the inclusion of an elastic foundation parameter into the governing equations can raise the critical speeds of rotation. In the case of the floppy disk this corresponds to the use of a baseplate located in close proximity to the spinning disk. The results presented are the effect of the foundation stiffness parameter and clamping radius ratio on the critical speeds. Also included, for the magnetic recording application, is the effect of the baseplate position on the critical speeds.     

Effects of variety and particle size upon utilization of fescue hay by lactating dairy cows and dairy heifers

Missouri-96 and Kentucky-31 hays were chopped with a tub grinder containing screens with apertures of 31, 63, or 100 mm in diameter and fed to dairy cows or heifers. Particle sizes (geometric mean diameter) were 1218, 1486, and 1933 micron, respectively, for the 31, 63, and 100-mm treatments. In Trial 1, the six treatments were fed ad libitum to 24 lactating cows; concentrate was offered at 1 kg/2 kg of milk. Dry matter intake and NDF digestibility were greater for Kentucky-31, but there were no other effects of variety. Particle size did not affect DM intake, DM or fiber digestibility, nitrogen partition, milk yield, or milk fat percentage. Crude protein digestibility was greatest for the 63-mm particle size treatment. In trial 2, the six treatments were fed ad libitum to 24 dairy heifers. Intake was greater for the 31 than for the 100-mm treatment but was unaffected by variety. Variety and particle size did not affect DM digestibility, nitrogen utilization, or daily gain. In this study fescue hay chopped through screens having apertures ranging from 31 to 100 mm was without effect on milk yield or composition. Reducing particle size increased intake and nitrogen utilization but not DM or fiber digestibility.     

An implicit slicing method for additive manufacturing processes

ABSTRACT

All additive manufacturing processes involve a distinct pre-processing stage whereby the part geometry is translated into a process-specific printing plan. This plan is developed in layers or slices of the original part geometry by a set of algorithms collectively known as a slicer. Most commercial slicing programmes generate tool paths explicitly and do not consider the impact of resulting geometric part features (e.g. thin walls, small corners, round profiles) which can result in critical voids leading to part failure. Recent work into an implicit slicing algorithm allows for an infinite set of functionally defined infill patterns to be defined. When these patterns are overlaid onto each part layer, the mechanical properties of the part and the presence undesirable voids and flaws can be reduced or eliminated. The variation of part properties is demonstrated with tensile tests of dog-bone specimens with different infill patterns to determine their resulting mechanical properties.     

Quantum Sensing in a Physiological‐Like Cell Niche Using Fluorescent Nanodiamonds Embedded in Electrospun Polymer Nanofibers

Fluorescent nanodiamonds (fNDs) containing nitrogen vacancy (NV) centers are promising candidates for quantum sensing in biological environments. This work describes the fabrication and implementation of electrospun poly lactic‐co‐glycolic acid (PLGA) nanofibers embedded with fNDs for optical quantum sensing in an environment, which recapitulates the nanoscale architecture and topography of the cell niche. A protocol that produces uniformly dispersed fNDs within electrospun nanofibers is demonstrated and the resulting fibers are characterized using fluorescent microscopy and scanning electron microscopy (SEM). Optically detected magnetic resonance (ODMR) and longitudinal spin relaxometry results for fNDs and embedded fNDs are compared. A new approach for fast detection of time varying magnetic fields external to the fND embedded nanofibers is demonstrated. ODMR spectra are successfully acquired from a culture of live differentiated neural stem cells functioning as a connected neural network grown on fND embedded nanofibers. This work advances the current state of the art in quantum sensing by providing a versatile sensing platform that can be tailored to produce physiological‐like cell niches to replicate biologically relevant growth environments and fast measurement protocols for the detection of co‐ordinated endogenous signals from clinically relevant populations of electrically active neuronal circuits.     

THE FLUID MECHANICS of COOKIE DOUGH EXTRUDERS

A model of the fluid mechanics of two roll cookie dough extruders, such as used for wire cut and rout cookies, is presented. the model uses the lubrication approximation to obtain a first estimate for the predictive equations for extruder capacity, power consumption, total shear strain, and forces developed by the rolls. These equations are used to understand the importance of various design and operational parameters.     

Spontaneous emission in microcavities

The transverse distributions of intensity inside and outside an optical cavity produced by spontaneous emission from atoms inside the cavity are reviewed. The mode properties inside a closed passive one-dimensional cavity are summarised and the spatial distributions of emitted light for a passive cavity with partially transmitting mirrors are discussed. A qualitative theory describes the effects of an amplifying medium inside the cavity, covering the regimes both below and above the lasing threshold. Expressions are derived for the angular spread of the output light in the presence of gain. A theory based on rigorous general relations between gain and noise provides more complete results for the spontaneous emission noise from an amplifying slab within an optical cavity.