Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

Malted weaning food made from maize,soybean, groundnut and cooking banana

Infant malnutrition and mortality are common in Africa, although Africa is endowed with agricultural produce that could be harnessed through processing to produce adequate infant food. This project was set up to explore the possibility of using local raw materials to develop a nutritious, low‐dietary‐bulk, cheap infant food. The materials used included cereal (maize), pulses (soybean and groundnut) and tuberiferous plants (cooking banana). The grains were first germinated and dried or kilned before milling and formulation. The malted products were compared with fermented ones in terms of nutritional, dietary bulk and acceptability criteria. Malting increased the nutrient content, reduced the dietary bulk and enhanced the taste of the infant food. In terms of protein content, least gelation concentration and overall acceptability, malted samples had values in the range of 138–151 mg g^?1, 150–175 g l^?1 and 7.2–8.82 respectively, while the control (fermented) sample had values of 54 mg g^?1, 100 g l^?1 and 6.29 respectively. Roasting of malted cereals above 55 °C reduced the bulk reduction ability but enhanced the taste of the products. A combination of malted maize and soybean, roasted groundnut and cooking banana in the ratio of 50:15:15:20 gave a very recommendable weaning food for infants between the ages of 6 months and 2 years. © 2002 Society of Chemical Industry     

Effects of introduced aspartic and glutamic acid residues on the P'1 substrate specificity, pH dependence and stability of carboxypeptidase Y

Carboxypeptidase Y is a serine carboxypeptidase isolated from Saccharomyces cerevisiae with a preference for C-terminal hydrophobic amino acid residues. In order to alter the inherent substrate specificity of CPD-Y into one for basic amino acid residues in P'1, we have introduced Asp and/or Glu residues at a number of selected positions within the S'1 binding site. The effects of these substitutions on the substrate specificity, pH dependence and protein stability have been evaluated. The results presented here demonstrate that it is possible to obtain significant changes in the substrate preference by introducing charged amino acids into the framework provided by an enzyme with a quite different specificity. The introduced acidic amino acid residues provide a marked pH dependence of the (kcat/Km)FA-A-R-OH/(kcat/Km)FA-A-L-OH ratio. The change in stability upon introduction of Asp/Glu residues can be correlated to the difference in the mean buried surface area between the substituted and the substituting amino acid. Thus, the effects of acidic amino acid residues on the protein stability depend upon whether the introduced amino acid protrudes from the solvent accessible surface as defined by the surrounding residues in the wild type enzyme or is submerged below.     

Supermodularity and subadditivity properties of the entropy on themajorization lattice

We prove that the entropy is a supermodular and subadditive function on the lattice of all n-dimensional probability distributions, ordered according to the partial order relation defined by majorization among vectors     

GaN and AlGaN high-voltage rectifiers grown by metal-organic chemical-vapor deposition

In this paper, we report the study of the electrical characteristics of GaN and AlGaN vertical p-i-n junctions and Schottky rectifiers grown on both sapphire and SiC substrates by metal-organic chemical-vapor deposition. For GaN p-i-n rectifiers grown on SiC with a relatively thin “i” region of 2 μm, a breakdown voltage over 400 V, and forward voltage as low as 4.5 V at 100 A/cm² are exhibited for a 60-μm-diameter device. A GaN Schottky diode with a 2-μm-thick undoped layer exhibits a blocking voltage in excess of ∼230 V at a reverse-leakage current density below 1 mA/cm², and a forward-voltage drop of 3.5 V at a current density of 100 A/cm². It has been found that with the same device structure and process approach, the leakage current of a device grown on a SiC substrate is much lower than a device grown on a sapphire substrate. The use of Mg ion implantation for p-guard rings as planar-edge terminations in mesageometry GaN Schottky rectifiers has also been studied.     

Design and performance evaluation of a banyan network basedinterconnection structure for ATM switches

This paper presents a new self-routing packet network called the plane interconnected parallel network (PIPN). In the proposed design, the traffic arriving at the network is shaped and routed through two banyan network based interconnected planes. The interconnections between the planes distribute the incoming load more homogeneously over the network. The throughput of the network under uniform and heterogeneous traffic requirements is studied analytically and by simulation. The results are compared with the results of the baseline network and another banyan network based parallel interconnection network. It is shown that, for the proposed design, a higher degree of heterogeneity results in better performance     

Mixed Analog Digital Simulation of Integrated Circuits with BRASIL

In this paper the approach of BRASIL in modelling digitalintegrated circuits is presented. BRASIL consists of a timingsimulator for digital MOS circuits coupled with an algorithmfor circuit simulation. The timing simulation is based upon afast macromodelling approach and the calculation of time-variantRC networks. The circuit simulator takes advantage of structuringthe system of nodal equations. With BRASIL a fast and accuratesimulation of digital circuits, with special regard to the analogbehaviour of highly integrated systems is possible.     

Brennstoffzellen

For two applications of fuel cells (SOFC and IMFC) system configurations and energy balances are presented. A decentralized combined heat and power plant on SOFC basis can be designed as a flexible system with high efficiency. A drive system with methanol reformer and fuel cell (IMFC) in comparison with a natural gas combustion engine has lower energy comsumption and much lower emissions.