Equivalent circuit modeling of coupled resonator filters

Using the stacked crystal filter (SCF) concept, a coupled resonator filter (CRF) can be interpreted as a device in which 2 piezoresonators are stacked on top of each other in such a way that a certain degree of acoustic interaction occurs. The work presented in this paper reports a novel all-electrical model for the CRF. The model associates acoustical coupling with an equivalent electrical coupling between resonators. The resulting equivalent circuit makes it possible to apply classical filter synthesis techniques directly based on the coupling control between resonators. It complements with a synthesis approach the analysis approach of the Mason model.     

Slow light structures in dye-doped polymer waveguides

We present a simple and consistent technique for fabricating slow light structures in dye-doped polymer waveguides using the process of irreversible photobleaching. The slow light structures are moiré gratings. The gratings are holographically written into channel waveguides photobleached in side-chained PMMA/DR1 films. The films are annealed during the photobleaching process in order to remove stresses in the films generated during the photobleaching process. These stresses have been observed to cause distortion and cracking of the film surface. The slowing factor for the moiré gratings is calculated from the reflectance spectrum of the waveguides using the Hilbert transform. Moiré gratings with slowing factors between 1.6 and 2.6 are demonstrated.     

A dynamic model for solder and the problem of accelerated life testing

Solder joint reliability under thermal cycling is a key problem in electronic packaging. Accelerated life testing (few cycles, larger temperature excursions) is often a practical necessity in predicting fatigue life in field environments (many cycles, smaller temperature excursions). Complex solder behavior with marked temperature dwell and cycle time influence at slower frequencies makes this a difficult problem. A dynamic model is presented which couples the effect of instability of coarsened grain shear band evolution in microstructure with the change in macroscopic constitutive behavior. Key features of the model include effects of shear band thickness compared with total solder joint thickness, pertinent to small scale design, and frictional resistance at slow deformation rates. Model correlation with test data is discussed and applied to the accelerated life test design.     

Molecular cloning and sequencing of a chitin synthase gene (CHS2) of Paracoccidioides brasiliensis

The nucleotide sequence of a chitin synthase gene (CHS2) of the dimorphic fungal human pathogen Paracoccidioides brasiliensis has been determined. The deduced amino acid sequence of Chs2p consists of 1043 residues and is highly homologous to other class II fungal chitin synthases. Computational structural analyses suggest very high similarity to other fungal chitin synthases with a highly variable region at the cytosolic amino-terminal region which may be related to its possible zymogenic nature, and the putative catalytic region close to seven membrane-spanning regions at the carboxyl terminus. The nucleotide sequence of CHS2 and its flanking regions has been submitted to GenBank under Accession Number Y09231. © 1998 John Wiley & Sons, Ltd.     

Calibration control of robot vertical assembly

Calibration methods that apply relative techniques to map robot inaccuracy increase robot flexibility by allowing for greater use and application of off-line path planning techniques. To successfully implement the off-line techniques described in this article, methods have been integrated for off-line tool control frame (TCF) calibration, data base integration, and on-line robot inaccuracy correction. The TCF calibration methods presented in this article successfully determine the TCF origin of the end-effectors and sensors attached to the robot distal link to within the robot repeatability. When the methods were applied to a SEIKO DTRAN RT-3000 robot, the TCP origins were statically predicted correct to within 0.025mm (0.001 in.). On-line methods determine robot inaccuracy by mapping robot configurations relative to operational parts or to spatial templates, in contrast to the contemporary global mapping approaches. For the Seiko robot the resulting inaccuracy distributions permit simple error correction equations to be applied, improving robot positioning accuracy to less than ±0.1 mm in locally large regions and to within the repeatability of the robot ±0.025 mm) in smaller regions. This represents an order-of-magnitude decrease in robot inaccuracy.     

Metabolomic Differentiation of Brassica rapa Following Herbivory by Different Insect Instars using Two-Dimensional Nuclear Magnetic Resonance Spectroscopy

The metabolic alterations of Brassica rapa (L.) leaves attacked by larvae of the specialist Plutella xylostella L. (Lepidoptera: Yponomeutidae) and the generalist Spodoptera exigua Hubner (Lepidoptera: Noctuidae) were investigated with nuclear magnetic resonance (NMR) spectroscopy, followed by a multivariate data analysis. The principal component analysis (PCA) of ¹H NMR spectra showed that metabolic changes in B. rapa leaves induced by the 2nd and the 4th instars were different from each other. However, the congestion of the one-dimensional ¹H NMR spectrum made it difficult to identify discriminating metabolites. To overcome the spectral complexity, several two-dimensional NMR techniques were applied. Of those evaluated, J-resolved spectroscopy, which affords an additional coupling constant, provided a wide range of structure information on differentiating the metabolites. Based on the J-resolved spectra combined with PCA, the major signals contributing to the discrimination were alanine, threonine, glucose, sucrose, feruloyl malate, sinapoyl malate, and gluconapin.     

世界公共交通简讯

匈牙利;意大利;     

Climate co-benefits of green building standards: water,waste and transportation

This paper quantifies the greenhouse gas (GHG) emissions co-benefits associated with water, waste and transportation usage in certified green commercial office buildings in California. The study compares the measured values of water, waste and transportation usage self-reported by office buildings certified under the Leadership in Energy and Environmental Design rating system for Existing Building Operations and Maintenance (LEED EBOM) to baseline values of conventional California office buildings. The green buildings in the LEED EBOM dataset produced 50% less GHGs due to water consumption than baseline buildings, 48% less due to solid waste management, and 5% less due to transportation. If applied to the entire California office building stock, performance typical of the certified green buildings would save 730,038?MgCO₂e/yr (metric tonnes) from transportation, 87,601?MgCO₂e/yr from water, and 45,280?MgCO₂e/yr from waste, for a total potential savings of about 862,920?MgCO₂e/yr relative to conventional construction. In addition, buildings earning additional credits for specified performance thresholds for water and waste in the LEED EBOM code attained performance levels even higher than required by the code provisions, suggesting that such code provisions in other contexts may help incentivize larger GHG emissions reductions than anticipated. Specific recommendations are made for building standards and certification schemes.     

Resources, personal strivings, and subjective well-being: A nomothetic and idiographic approach.

The covariation of resources such as money, family support, social skills, and intelligence with subjective well-being (SWB) was assessed in 195 college students. Informant ratings provided an index of resources. Self-reports, daily experience sampling, and informant reports were used to measure SWB. The authors concluded that resources taken together are moderately strong predictors of SWB. This conclusion, however, was qualified by the fact that life satisfaction was more closely related to resources than was affective well-being and that social and personal resources were in general more strongly related to SWB than were material resources. The findings also supported the hypothesis that resources correlate more strongly with SWB when they are relevant to an individual's idiographic personal strivings. A tendency was found for people to choose personal strivings for which they have relevant resources, and the degree of congruence of individuals' goals with resources was predictive of SWB. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Physical attractiveness and subjective well-being.

Three studies were conducted to determine whether physical attractiveness (PAT) is related to subjective well-being (SWB). In the first study (N?=?221), unselected students were photographed and videotaped. In the second study (N?=?131), participants were selected on the basis of extremes in PAT, and in the third study (N?=?155), participants were preselected for extreme scores on SWB. Correlations between SWB and PAT varied from .03 to .33. In Study 1 the mean correlation between PAT and SWB was .13. When appearance enhancers (hair, clothing, and jewelry) were covered or removed in Studies 2 and 3, the correlation between PAT and SWB dropped, suggesting that part of the SWB–PAT relation might be due to happier people doing more to enhance their beauty. The impact of PAT on SWB may be mitigated by the fact that others agree on a target's PAT at only modest levels. It was found that self-perceptions of PAT were correlated with both one's objective PAT and one's SWB. (PsycINFO Database Record (c) 2010 APA, all rights reserved)