Bi-objective optimization approaches to many-to-many hub location routing with distance balancing and hard time window

Neural Computing and Applications - This study addresses a many-to-many hub location-routing problem where the best-found locations of hubs and the best-found tours for each hub are determined with...     

A comparative study on optimised and non‐optimised axial flow,spherical reactors in naphtha reforming process

In this study, the operating conditions of an axial flow spherical reactor have been optimised using a reliable optimisation technique and the results are compared with the results of non‐optimised conditions. The dynamic behaviour of the reactor has been considered in the optimisation process and orthogonal collocation method has been used in order to solve the obtained equations from mathematical modelling of the process. The goal of this study is to maximise the aromatics and hydrogen production rate. Therefore, the objective function is the combination of two terms which include the production rate of the mentioned components. The catalyst distribution for each reactor, the inlet pressure of the system, Length per radius for each reactor, the naphtha feed molar flow rate and the hydrogen mole fraction in the recycle stream as well as the inlet temperature of each reactor have been optimised in this study. © 2011 Canadian Society for Chemical Engineering     

Dynamic mechanical behavior and nanostructure morphology of hyperbranched‐modified polypropylene blends

Polypropylene (PP) was modified utilizing two types of polyesteramide‐based hyperbranched polymers (amphiphilic PS and hydrophilic PH). A maleicanhydride‐modified PP (PM) was used as a reactive dispersing agent to enhance the modification by grafting the hyperbranched polymers onto the PP chains. Pure PP, two different non‐reactively modified samples, i.e. excluding PM, and two different reactively modified samples, i.e. including PM, were studied. Investigating the morphology of the samples was performed by scanning electron microscopy. To follow the effect of the modification on the dynamic mechanical properties, dynamic mechanical analysis experiments both in the melt (rheometric mechanical spectrometry) and in solid state (dynamic mechanical thermal analysis) were carried out. In the next step, the nanocrystalline structure of the samples was studied by small angle X‐ray scattering (SAXS) in two different modes, i.e. static and recrystallization. Hundreds of SAXS patterns were analyzed automatically using procedures written in PV‐WAVE image‐processing software. The chord distribution function (CDF) was calculated and the long period (l_p) of the crystal lamellae was extracted from the CDFs. The rheometric mechanical spectrometry results show that both hyperbranched polymers decrease complex viscosity η^* and enhance liquid‐like behavior. This happens more significantly when PM is included. The dynamic mechanical thermal analysis results reveal that T_g decreases when PS and PH are added. In the reactively modified samples this reduction is compensated most probably because of the crosslinked structure formed through the grafting reaction between the hyperbranched polymers and PM. Such structure is confirmed by SAXS data and calculated CDFs in the recrystallization mode. Static SAXS data also show enhancement in the crosshatched morphology of the crystalline lamellae of PP for reactively modified samples compared with non‐reactively modified samples. © 2013 Society of Chemical Industry     

Quantitative characterization of carrier injection across metal–organic interfaces using Bardeen theory

We have investigated the contact between a metal and an organic/polymeric (o/p) material and we have introduced a relation for carrier injection using Bardeen theory. A series of narrow barriers is considered in the semiconductor side to account for the localized nature of the carriers in the o/p material. As an application of the model, we have calculated the hopping rate of carriers in terms of the contact parameters. Also, we have discussed the hopping of carriers deep into the organic dielectric. Finally, we have explored the hopping rate in practical contacts between polyfluorene-based polymers and different electrodes.     

Performance analysis of multi-antenna relay networks with imperfect channel estimation

In this paper, we present the performance of multi-antenna selective combining decode-and-forward (SC-DF) relay networks over independent but non-identical Nakagami-m fading channels with imperfect channel estimation. The outage probability, moment generating function (MGF) and symbol error probability (SEP) will be derived in closed-form using the SNR statistical characteristics. To make the analysis trackable, we have derived the MGF and SEP for integer values of fading severity, m. Also, to make the relations more simple, we develop high signal to noise ratio (SNR) analysis for the performance metrics of our system. Subsequently, we propose optimal and adaptive power allocation algorithms along with the equal power allocation method. Finally, for comparison with analytical formulas, we perform some Monte-Carlo simulations.     

Pre-aging time dependence of microstructure and mechanical properties in nanostructured Al-2wt%Cu alloy

This work is focused on the effect of pre-aging time on the properties of Al-2wt%Cu alloy processed by accumulative roll bonding (ARB) process. Following aged at 190 °C for 10 or 30 min, the samples were deformed up to a strain of 4.8 by the ARB process. The microstructure evolution was investigated by transmission electron microscope and electron backscattering diffraction analyzes. The results showed that the Al₂Cu precipitates were formed with different sizes due to the different pre-aging times and the finer precipitates were more effective on the formation of high angle grain boundaries during the ARB process. The grain size of Aged-10 min and Aged-30 min specimens decreased to 400 nm and 420 nm, respectively, after 6 cycles of the ARB process. Also, the final texture after 6 cycles of the ARB process, shown in the {111} pole figure, were different depending on the starting microstructures. The mechanical properties of specimens were investigated by the Vickers microhardness measurements and the tensile tests. The results showed that the mechanical properties are affected by the starting microstructure. The mechanical properties of Aged-10 min specimen were different compared to Aged-30 min specimen due to the different size of the pre-existing precipitates. Although by continuing process, the precipitates were probably dissolved due to the heavy deformation.     

Rheological and thermal stability of novel weak gels based on sulfonated polyacrylamide/scleroglucan/chromium triacetate

The present study deals with weak gels based on sulfonated polyacrylamide (SPA)/scleroglucan (SC)/Cr³⁺ with an exceptional thermal stability in electrolyte media. The rheological results showed that on increasing the SC concentration the shear viscosity and storage modulus of the SPA/SC/Cr³⁺ system were increased and the dependence of the storage modulus on frequency became weaker. The yield stress of the SPA/SC/Cr³⁺ system was higher than that of the corresponding SPA/SC system. The thermochemical stability increased with increasing relaxation time. The SPA/SC/Cr³⁺ semi‐interpenetrating network exhibited the lowest viscosity loss in electrolyte media; therefore this system may be a potential candidate for enhanced oil recovery applications. © 2016 Society of Chemical Industry     

Multi-objective Phasor Measurement Unit Placement in Electric Power Networks: Integer Linear Programming Formulation

A multi-objective optimal phasor measurement unit placement model using integer linear programming is presented in this article. The proposed model simultaneously optimizes two objectives, i.e., minimization of phasor measurement unit numbers and maximization of measurement redundancy. To calculate the redundancy criteria, the single-line outage and the phasor measurement unit loss are considered simultaneously. A linear formulation is presented for both objective functions. Also herein, to address conflicting attributes and identify Pareto optimal solutions of the multi-objective optimal phasor measurement unit placement problem, a new multi-objective mathematical programming method is proposed. Finally, a new index, i.e., minimum distance to utopia point, is implemented to select the most preferred solution among the available Pareto front based options on the goal to achieve judicious decision makers. Two test systems, i.e., a modified 9-bus and an IEEE 118-bus test systems, are used to illustrate the effectiveness of the proposed framework.