Convenient synthesis of benzamides mediated by poly(4‐vinylpyridine)‐supported benzoyl chloride

The use of polymeric reagents simplifies the routine acylation of amines because it eliminates traditional purification. In this article, the use of readily available crosslinked poly(4‐vinylpyridine)‐supported benzoyl chloride as an acylating agent of amines in the presence of K₂CO₃ in n‐hexane is described. The product was readily obtained by the filtration and evaporation of the solvent. The spent polymeric reagent could be regenerated and reused. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermo economic evaluation of oxy fuel combustion cycle in Kazeroon power plant considering enhanced oil recovery revenues简

Oxy fuel combustion and conventional cycle （currently working cycle） in Kazeroon plant are modeled using commercial thermodynamic modeling software. Economic evaluation of the two models regarding the resources of transport and injection of carbon dioxide into oil fields at Gachsaran for enhanced oil recovery in the various oil price indices is conducted and indices net present value （NPV） and internal rate of return on investment （IRR） are calculated. The results of the two models reveal that gross efficiency of the oxy fuel cycle is more than reference cycle （62% compared to 49.03%）, but the net efficiency is less （41.85% compared to 47.92%） because of the high-energy consumption of the components, particularly air separation unit （ASU） in the oxy fuel cycle. In this model, pure carbon dioxide with pressure of 20~ 105 Pa and purity of 96.84% was captured. NOx emissions also decrease by 4289.7 tons per year due to separation of nitrogen in ASU. In this model, none of the components of oxy fuel cycle is a major engineering challenge. With increasing oil price, economic justification of oxy fuel combustion model increases. With the price of oil at $ 80 per barrel in mind and $ 31 per ton fines for emissions of carbon dioxide in the atmosphere, IRR is the same for both models.     

Synthesis and characteristics of fly ash and bottom ash based geopolymers–A comparative study

The research was carried out to develop geopolymers mortars and concrete from fly ash and bottom ash and compare the characteristics deriving from either of these products. The mortars were produced by mixing the ashes with sodium silicate and sodium hydroxide as activator solution. After curing and drying, the bulk density, apparent density and porosity, of geopolymer samples were evaluated. The microstructure, phase composition and thermal behavior of geopolymer samples were characterized by scanning electron microscopy, XRD and TGA-DTA analysis respectively. FTIR analysis revealed higher degree of reaction in bottom ash based geopolymer. Mechanical characterization shows, geopolymer processed from fly ash having a compressive strength 61.4 MPa and Young's modulus of 2.9 GPa, whereas bottom ash geopolymer shows a compressive strength up to 55.2 MPa and Young's modulus of 2.8 GPa. The mechanical characterization depicts that bottom ash geopolymers are almost equally viable as fly ash geopolymer. Thermal conductivity analysis reveals that fly ash geopolymer shows lower thermal conductivity of 0.58 W/mK compared to bottom ash geopolymer 0.85 W/mK.     

A comparative study on optimised and non‐optimised axial flow,spherical reactors in naphtha reforming process

In this study, the operating conditions of an axial flow spherical reactor have been optimised using a reliable optimisation technique and the results are compared with the results of non‐optimised conditions. The dynamic behaviour of the reactor has been considered in the optimisation process and orthogonal collocation method has been used in order to solve the obtained equations from mathematical modelling of the process. The goal of this study is to maximise the aromatics and hydrogen production rate. Therefore, the objective function is the combination of two terms which include the production rate of the mentioned components. The catalyst distribution for each reactor, the inlet pressure of the system, Length per radius for each reactor, the naphtha feed molar flow rate and the hydrogen mole fraction in the recycle stream as well as the inlet temperature of each reactor have been optimised in this study. © 2011 Canadian Society for Chemical Engineering     

Convenient synthesis of sulfonamides from amines and p‐toluene sulfonyl chloride mediated by crosslinked poly(4‐vinylpyridine)

A general, mild, and convenient method has been developed for the synthesis of various N‐substituted and N, N‐disubstituted sulfonamides, as a class of sulfa drugs, from the corresponding amines and p‐toluene sulfonyl chloride in the presence of readily available crosslinked poly(4‐vinylpyridine) as a catalyst, base or polymeric substrates. The use of polymeric catalyst simplifies routine sulfonylation of amines because it eliminates the traditional purification. The polymer can be removed quantitatively and it can be regenerated and reused for several cycles without losing its activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of high temperature annealing on scratch behavior of acrylonitrile styrene acrylate copolymers

The scratch behavior of butyl-acrylate rubber-modified styrene-acrylonitrile (ASA) upon high temperature annealing is investigated following the ASTM D7027/ISO 19252 linearly increasing normal load test methodology. The critical normal loads at the onset of the major deformation transitions along the scratch path, such as groove formation, scratch visibility, microcrack formation, and plowing, are reported and quantitatively analyzed. It is found that the scratch resistance improves with high temperature annealing, i.e., 30 °C above T_g, as compared to annealing below or around T_g. Microscopic investigation suggests that the increase in scratch resistance is related to the changes in surface morphology of the polymer. It is concluded that performing high temperature annealing enhances the scratch performance without compromising ASA bulk properties. Implication of the present study for improving scratch resistance of polymers is discussed.     

Cost optimization of a combined power and water desalination plant with exergetic,environment and reliability consideration

The present study deals with the multi-objective optimization for designing a combined gas turbine and multi stage flash desalination plant. In optimization approach, the exergetic, economic and environmental aspects have been considered, simultaneously. In order to achieve the optimal design, Multi-objective genetic algorithm (MOGA) is applied as a suitable optimization technique. The thermoenvironomic objective function is obtained by integrating the environmental impacts and thermoeconomic objective. By applying the optimization approach, this objective function is minimized, whereas system exergy efficiency is maximized. Moreover, equipment reliability using the state-space and the continuous Markov method is incorporated in optimization results to improve the products' cost values. The optimization results show that the cost of products and environmental cost impact are reduced by 13.4% and 53.4%, respectively, whereas a 14.8% increase happens in total exergy efficiency. Therefore, improvement in all objectives has been achieved using the optimization process, although the power and water productions have not changed much. Additionally, the sensitivity analysis shows the relationship between the fuel cost, pollution damage cost and the objective functions.     

Study on the performance of Cd2+ sorption using dimethylethylenediamine-modified zinc-based MOF (ZIF-8-mmen): optimization of the process by RSM technique

ABSTRACT

Cadmium as a highly toxic metal is released into the environment through paper production, metal processing, phosphate fertilizers, insecticides, and treatment of wastewater. Cadmium also inhibits the body activities and is very toxic for kidney and other organisms. In the current study, zinc-based metal–organic framework, zeolitic imidazolate framework (ZIF)-8, was synthesized and modified by dimethylethylenediamine (ZIF-8-mmen) for the removal of cadmium. To optimize the experiments, response surface methodology was applied with three variables including pH, adsorbent dosage, and contact time using central composite design. The optimum conditions for pH, dosage, and time were 2, 0.1 g, and 89 min, respectively, with removal efficiency of 85.38%. The Langmuir isotherm (q _m = 1000 mg/g) indicates the monolayer adsorption. The kinetic studies reveal that the Lagergren model was predominant and cadmium was not chemisorbed. Thermodynamic parameters show spontaneous, endothermic, and physisorption processes.     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Expression of Main Toll-Like Receptors in Patients with Different Types of Colorectal Polyps and Their Relationship with Gut Microbiota

Abnormal activation of Toll-like receptor (TLRs) signaling can result in colon cancer development. The aim of this study was to investigate the expression of important TLRs in different histological types of colorectal polyps and evaluate their relationship with intestinal microbiota. The expression levels of TLR2, 3, 4, and 5 were analyzed in intestinal biopsy specimens of 21 hyperplastic polyp (HP), 16 sessile serrated adenoma (SSA), 29 tubular adenoma (TA), 21 villous/tubulovillous (VP/TVP) cases, and 31 normal controls. In addition, selected gut bacteria including Streptococcus bovis, Enterococcus faecalis, Enterotoxigenic Bacteroides fragilis (ETBF), Fusobacterium nucleatum, Porphyromonas spp., Lactobacillus spp., Roseburia spp., and Bifidobacterium spp. were quantified in fecal samples using absolute qRT PCR, and, finally, the association between TLRs and these gut microbiota- was evaluated by Spearman’s correlation coefficient. Higher expression of TLR2 and TLR4 in VP/TVP and TA, and lower expression levels of TLR3 and TLR5 in all type of polyps were observed. The differences in TLR expression patterns was not only dependent on the histology, location, size, and dysplasia grade of polyps but also related to the intestinal microbiota patterns. TLR2 and TLR4 expression was directly associated with the F. nucleatum, E. faecalis, S. bovis, Porphyromonas, and inversely to Bifidobacterium, Lactobacillus, and Roseburia quantity. Furthermore, TLR3 and TLR5 expression was directly associated with Bifidobacterium, Roseburia, and Lactobacillus quantity. Our results suggest a possible critical role of TLRs during colorectal polyp progression. An abnormal regulation of TLRs in relation to gut microbial quantity may contribute to carcinogenesis.