Deposition rate dependence of coercivity in vaccum evaporated CoCr films

Deposition rate dependence of perpendicular coercivity Hcl in Cocr evaporated films at the deposition rate ranging from 0.4nm/s to 400nm/s is studied. Hcl increases with decreasing deposition rate as well as with increasing substrate temperature. A High Hcl over 500 Oe, which has ever been obtained only at a substrate temperature over 250°C when deposition rate is high(400nm/s), is obtained at a substrate temperature of 150°C under deposition rate of 2nm/s. "Shoulder" in the hysteresis loop disappears as Hcl exceeds 400 Oe. Therefore to decrease the deposition rate and to increase the substrate temperature have the same effect on Hcl. Saturation magnetization of the films with the same Cr concentration increases with decreasing deposition rate, and it is suggested that the degree of Cr segregation increases with decreasing deposition rate. Hcl is independent of the background pressure when the relative pressure, the quotient of (background pressure/deposition rate), is between 2×10^-8and 5×10^-6torr/(nm/s). From the results above, it is clarified that the difference of deposition rate between vacuum evaporation and sputtering is one of the major reasons for the difference of Hcl between the two.     

Segregation in sputtered Co-Cr films

The segregation growth process in sputtered Co-Cr films is investigated by examining the effect of substrate temperature on the segregated microstructure and magnetic properties. In sputtered Co-25at%Cr films, segregation occurs below 560°C, and both the saturation magnetization and the perpendicular anisotropy constant show a maximum around a substrate temperature of 300°C, where a specific microstructure, called a CP (chrysanthemum-like pattern) structure, is observed. The results suggest that the CP structure becomes observable in the highly segregated state and generates high perpendicular anisotropy. A new segregation growth model is derived from the results of the CP structure observations. Using this model, it is possible to explain the continuous transition of the magnetization mode between the continuous and the particulate modes.     

Modeling of optical low coherence reflectometry recorded Braggreflectograms: evidence to a decisive role of Bragg spectral selectivity

This paper draws attention to the basic principles governing reflections in uniform Bragg reflectors (BR) when measured employing optical low coherence reflectometry (OLCR) technique. Using computations based on transfer matrix method (TMM), we first showed a strong spectral dependence of Bragg reflectograms on an OLCR probe spectrum. Later, this dependence is exploited to evaluate, for the first time, the coupling coefficient κ of a Bragg grating in a distributed Bragg reflector (DBR) laser on InP     

On rigorous transaction scheduling

The class of transaction scheduling mechanisms in which the transaction serialization order can be determined by controlling their commitment order, is defined. This class of transaction management mechanisms is important, because it simplifies transaction management in a multidatabase system environment. The notion of analogous execution and serialization orders of transactions is defined and the concept of strongly recoverable and rigorous execution schedules is introduced. It is then proven that rigorous schedulers always produce analogous execution and serialization orders. It is shown that the systems using the rigorous scheduling can be naturally incorporated in hierarchical transaction management mechanisms. It is proven that several previously proposed multidatabase transaction management mechanisms guarantee global serializability only if all participating databases systems produce rigorous schedules     

Some studies on plasma polymerization of benzene and cyclohexane in the gas phase

The glow discharge polymerization benzene and cyclohexane at 13.56 mHz, and 60 watts, in a plug flow reactor with inner electrodes was studied. Film powder and oily polymeric products were obtained from benzene, and only films were produced from cyclohexane. Polymers produced were analyzed by infrared and their characteristic maps demonstrating the correlation between various physical forms of polymer and reaction conditions were prepared. Excepting oily products, all others are found highly crosslinked and contained free radicals. Contrary to the plasma polymerization (PP) oil of benzene, all others showed no aromatic character.     

A simple and accurate method of probability of bit error analysisfor asynchronous band-limited DS-CDMA systems

This paper considers probability of bit error (P_e) analysis in asynchronous band-limited direct-sequence code-division multiple-access (DS-CDMA) systems. It presents a simple and accurate method of P_e analysis. The proposed method can serve as an attractive alternative to the only two techniques currently available for band-limited systems: the standard Gaussian approximation (SGA) and the characteristic function method. The former is prone to inaccuracy while the latter, large computational complexity. The method generalizes the simplified improved Gaussian approximation (SIGA) derived previously for rectangular pulses. This paper also outlines a generalization of another method referred to as the improved Gaussian approximation (IGA). Numerical examples demonstrate the far greater accuracy of the generalized SIGA with respect to the SGA. The examples consider the IS-95 and square-root raised cosine (Sqrt-RC) pulses as well as uniform and nonuniform received power conditions     

CHARACTERIZATION OF Si_(1-x-y)Ge_xC_y FILMS GROWN BY ION IMPLANTATION AND SUBSEQUENT SOLID PHASE EPITAXY

Si1-x-yGexCy ternary alloy films were grown on monocrystalline silicon substrates by C ion implantation and subsequent solid phase epitaxy (SPE). Two-step anneal-ing technique was employed in the SPE. The structure and electrical properties of the alloy films were determined using Fourier transform infrared spectroscopy and van der Pauw Hall measurements, respectively. With the optimization of two-step anneal-ing technique for the implanted Si1-x-yGexCy layers, a certain amount of C atoms occupied substitutional sites and no SiC was formed.     

Useful solar heat gains in multi-zone non-domestic buildings as a function of orientation and thermal time constant

Two parameters affecting useful solar absorption are orientation and thermal mass. Solar energy absorption in buildings depends on these parameters in a complex manner particularly when considering large glazing ratios and large direct components of insolation. Therefore, where parameters of different zones in a multi-zone building vary, useful solar absorption will also vary. For higher northern latitudes, compared with south orientation, useful solar absorption differs by about 2%, 4% and 6% between large and small time constants for east, west and north orientations, respectively. The smallest and largest differences are for east and north orientations, respectively. Fenestration design should be a consequence of orientation and overshading, seeking to balance daylight, solar gains and heat losses.     

ENHANCED RECOVERY OF MEDIUM CRUDE OIL IN HETEROGENEOUS RESERVOIRS USING AIR INJECTION/IN SITU COMBUSTION—HORIZONTAL WELL TECHNOLOGY

A simple 3-D physical model has been developed to investigate the use of in-situ combustion in heterogeneous reservoirs. Gas over-ride phenomena is one of the major causes of instability of combustion process; gas override results in poor sweep efficiency with subsequent low oil recovery. However, the use of horizontal wells in direct line drive arrangement has shown a great deal of combustion stability and propagation by means of controlling gas override This paper has extended the scope of using horizontal wells in direct line drive configuration in heterogeneous reservoirs. Three cases of reservoir heterogeneity were investigated in this study. In the first case, a dual-layer permeability of sand was used (a high permeability layer on top and a low permeability layer on bottom); in the second case, placement of the aforementioned layers was swapped, and in the third case, a high permeability streak was sandwiched between two low permeability layers of fine sand. The results indicated that a stable combustion front has been achieved in the first two cases with a high oil recovery, however the performance of the combustion process markedly deteriorated when a high permeability streak layer was utilised as a result of a severe low temperature oxidation due to oxygen channelling through the streak, with subsequent poor sweep efficiency and in turn low oil recovery. The use of horizontal wells as producers and injectors in a line drive configuration is beneficial and effective for minimising the effect of reservoir heterogeneity to some extent.