Novel gold-capped nanopillars imprinted on a polymer film for highly sensitive plasmonic biosensing

Herein, a nanoporous alumina was fabricated to use as a mold in transforming nanopillar structures onto a thin film polymer by thermal nanoimprint lithography (NIL). The size of the pores was successfully controlled by varying the applied voltages and etching time. These nanoporous structures were transferred to the Cyclo-olefin polymer (COP) film surface from the porous mold by a thermal nanoimprinting process. A plasmonic substrate was fabricated by sputtering a thin layer of gold onto this nanopillar polymer structure, and the refractive index response in a variety of media was evaluated. Finally, the biosensing capacity of this novel plasmonic substrate was verified by analysis of Human immunoglobulin and achieved a minimum detection limit of 1.0 ng/mL. With the advantages of mass production with consistent reproducibility stemming from the nanoimprint fabrication process, our gold-capped polymeric pillars are ready for the transition from academic interest into commercialization systems for practical use in diagnostic applications.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Estimation of daily intake of phenols in hospital meal samples

Daily intakes of 12 phenols which are possible endocrine disruptors were estimated in hospital meals from 2000 to 2001. 4-Nonylphenol (4-NP (mix)) and bisphenol A (BPA) were detected at levels of 5.0 to 19.4 ng/g and 0.2 to 1.1 ng/g, respectively. 4-tert-Butylphenol, 4-n-pentylphenol, 4 -tert-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol and 4-tert-octylphenol were detected at levels of 0.1 to 2.4 microg/g. The daily intakes of 4-NP (mix) and BPA were 5.8 microg/day and 0.42 microg/day, respectively. The daily intakes of other phenols were less than 1 microg/day.     

Carbonization of aromatic hydrocarbons—V: Microscopic features of carbons obtained by the aid of catalysts

Microscopic observation of carbons obtained from pure aromatic hydrocarbons by the aid of carbonization catalysts was carried out to clarify the microstructure of these carbons of different features. Reflected polarized-light microscopy distinguished needle, mosaic and isotropic cokes, former two of which were produced with aluminum chloride and the last with potassium. High resolution microscopy revealed that these carbons calcined at 1250° had different degree of layered structure, corresponding to the crystallographic parameters of these samples graphitized at 2500°C. The reasons for the carbons produced with potassium to be non-graphitizable are discussed from the macro- and micro-features of the carbons.     

Effects of aging and moisture on the dynamic viscoelastic properties of oriental lacquer (urushi) film

The effects of aging and moisture on the dynamic viscoelastic properties of three oriental lacquer films were investigated. With aging over 1000 days at room temperature, the glass‐transition temperature of the lacquer films (T_α) shifted to higher temperatures, the maximum loss tangent (tanδ_α) decreased, and the storage modulus at 20°C (E) increased. These changes were analogous irrespective of lacquers. With increasing moisture content, E decreased and tanδ increased at room temperature. Although the equilibrium moisture content of the virgin lacquer (sap) film was higher than that of the clear lacquer film, its E and tanδ were more stable with an increase of moisture content. It was speculated that the polysaccharides aggregated in the sap film did not effectively contribute to the mechanical properties of the film, while their hygroscopicity resulted in higher moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2288–2294, 2002     

Mechanical relaxation processes of wood in the low-temperature range

The dynamic viscoelastic properties of untreated and chemically modified wood specimens were determined in the temperature range 123 to 293 K and at constant frequencies. Absolutely dry wood specimens exhibited one relaxation process labeled γ at around 180 K, being attributed to the motions of methylol groups in the amorphous region of the wood constituents. The changes in the γ process due to the chemical modifications were explained by the reduction in the original γ loss peak due to the decrease of methylol groups, and an additional relaxation induced by the other groups introduced. With moisture adsorption, an additional relaxation labeled β was induced at 220–240 K. It appeared only when the wood adsorbed moisture irrespective of chemical modifications, and its characteristics were not affected by the formaldehyde and PEG treatments involving the remarkable changes in the mobility of amorphous molecules. These results suggested that the dominant mechanism of β relaxation was not the segmental motions of the main chain, but the motion of the adsorbed water molecules. The positive activation entropy of the β relaxation was interpreted to reflect rearrangement of the adsorption sites required for the rotation of the adsorbed water molecules. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3338–3347, 2001     

Novel Perovskite-Type Oxide Catalysts for Dehydrogenation of Ethylbenzene to Styrene

We investigated novel LaMnOx perovskite-oxide (ABO₃) catalysts for effective catalytic dehydrogenation of ethylbenzene to produce styrene monomer. Comparison with industrial Fe–K catalyst, our La_0.8Ba_0.2Mn_0.6Fe_0.4O_3-δ catalyst showed higher activity. Results show that the A-site in perovskite-type oxides affected catalytic dehydrogenation activities and that the B-site affected stability of the activities.