Catalytic decomposition of biomass tars with iron oxide catalysts

Catalytic gasification of wood (Cedar) biomass was carried out using a specially designed flow-type double beds micro reactor in a two step process: temperature programmed non-catalytic steam gasification of biomass was performed in the first (top) bed at 200–850 °C followed by catalytic decomposition gasification of volatile matters (including tars) in the second (bottom) bed at a constant temperature, mainly 600 °C. Iron oxide catalysts, which transformed to Fe₃O₄ after use possessed catalytic activity in biomass tar decomposition. Above 90% of the volatile matters was gasified by the use of iron oxide catalyst (prepared from FeCl₃ and NH_3aq) at SV of 4.5 × 10³ h^?1. Tar was decomposed over the iron oxide catalysts followed by water gas shift reaction. Surface area of the iron oxide seemed to be an important factor for the catalytic tar decomposition. The activity of the iron oxide catalysts for tar decomposition seemed stable with cyclic use but the activity of the catalysts for the water gas shift reaction decreased with repeated use.     

Occurrence and sources of perfluorinated surfactants in rivers in Japan

We analyzed perfluorinated surfactants (PFSs) in 20 river samples and 5 wastewater secondary effluent samples in Japan to reveal their occurrence and sources. Nine PFS species were determined: perfluorooctanesulfonate (PFOS), perfluorooctane sulfonamide (FOSA), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), perfluorododecanoate (PFDDA), and perfluorotridecanoate (PFTDA). PFSs were detected in all rivers, revealing nationwide contamination of rivers. In particular, 11 out of 20 river samples exceeded New Jersey guidance for PFOA in drinking water (40 ng/L). PFOS, PFHpA, PFOA, and PFNA were major species in Japan. Concentrations of PFOS, PFHpA, and PFNA in rivers were strongly correlated with population density, suggesting that the chemicals were derived from urban activities. PFOA showed a significant but weak correlation. We used crotamiton, a marker of sewage effluent, for further source analysis. Concentrations of PFOS, PFHpA, and PFNAwere strongly correlated with those of crotamiton, and plots of secondary effluents fell near the regression lines of rivers, indicating that the PFOS, PFHpA, and PFNA in rivers were derived from sewage effluent. On the other hand, PFOA was found at remarkably high levels (54-192 ng/L) in seven river samples containing low levels of crotamiton, suggesting that it was derived from nonsewage point sources, as well as sewage effluent. The total fluxes of sewage-derived PFOS, PFHpA, PFOA, and PFNA from Japan were estimated to be 3.6, 2.6, 5.6, and 2.6 t/year, respectively. This is the first report to identify PFOA in several rivers, derived from nonsewage point sources, by using a marker of sewage effluent.     

Electron beam sterilization of cyclo olefin polymer leads to polymer degradation and production of alkyl radicals

We investigated the effects of electron‐beam (EB) sterilization on syringe barrels manufactured from cyclo olefin polymer (COP). The chemical structure of the polymer was determined by interpreting the ¹³C NMR and DEPT‐135 spectra of the COP resin. The antioxidants in the resin were identified by analyzing the liquid chromatography‐photo diode array‐mass spectrometry (LC‐PDA‐MS) data for the methanol extract of the resin and the gas chromatography‐mass spectrometry (GC‐MS) data for the supercritical methanol degradation products of the extract. NMR and LC‐PDA‐MS analyses revealed that EB sterilization produces degradation products in the COP main chain and reduces the quantity of the antioxidants in the COP resin. ESR spectra of the EB‐sterilized syringe barrels indicated the presence and location of alkyl radicals, which were generated in the COP main chain by EB sterilization. ESR analyses also indicated that the quantity of alkyl radicals decreased over time. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43498.     

Polyacene capacitors

We fabricated two types of polyacene capacitor with extremely stable polyacenic semiconductor (PAS) as the positive and negative electrodes. The first one is a coin-type PAS capacitor (six different sizes), which possesses large capacity with high reliability. Its capacity is much larger than that of the conventional electric double-layer capacitor which uses activated carbon as electrode. PAS capacitor can maintain more than 70% of the initial capacity even after 100 000 cycles. Moreover, this capacitor can be charged and discharged in a few minutes as well as at low rate. The second one is a cylinder-type PAS capacitor (diameter: 18 mm, height: 65 mm) which shows high capacity of 100 F and can discharge at the extremely high rate of 80 C. The coin-type PAS capacitor is currently used for memory back-up of electrical and communication equipment, and the cylinder-type is considered to be useful as power back-up for starting drive parts of electric equipment which needs high power density.     

Evaluation of Three-Dimensional Bioprinted Human Cartilage Powder Combined with Micronized Subcutaneous Adipose Tissues for the Repair of Osteochondral Defects in Beagle Dogs

Cartilage lesions are difficult to repair due to low vascular distribution and may progress into osteoarthritis. Despite numerous attempts in the past, there is no proven method to regenerate hyaline cartilage. The purpose of this study was to investigate the ability to use a 3D printed biomatrix to repair a critical size femoral chondral defect using a canine weight-bearing model. The biomatrix was comprised of human costal-derived cartilage powder, micronized adipose tissue, and fibrin glue. Bilateral femoral condyle defects were treated on 12 mature beagles staged 12 weeks apart. Four groups, one control and three experimental, were used. Animals were euthanized at 32 weeks to collect samples. Significant differences between control and experimental groups were found in both regeneration pattern and tissue composition. In results, we observed that the experimental group with the treatment with cartilage powder and adipose tissue alleviated the inflammatory response. Moreover, it was found that the MOCART score was higher, and cartilage repair was more organized than in the other groups, suggesting that a combination of cartilage powder and adipose tissue has the potential to repair cartilage with a similarity to normal cartilage. Microscopically, there was a well-defined cartilage-like structure in which the mid junction below the surface layer was surrounded by a matrix composed of collagen type I, II, and proteoglycans. MRI examination revealed significant reduction of the inflammation level and progression of a cartilage-like growth in the experimental group. This canine study suggests a promising new surgical treatment for cartilage lesions.     

Effect of anisotropic yield functions on the accuracy of hole expansion simulations

The deformation behavior of 780 MPa grade dual-phase steel sheet subjected to hole expansion is investigated both experimentally and analytically to clarify the effect of the material model (anisotropic yield function) on the predictive accuracy of finite element analysis of hole expansion. Biaxial tensile tests of the material were conducted; contours of plastic work and the directions of plastic strain rates are precisely measured and are in good agreement with those predicted from the Yld2000-2d yield function with an exponent of 4 ( [Barlat et al., 2003] and [Yoon et al., 2004]). Finite element and experimental analyses on the hole expansion of the material were conducted. The Yld2000-2d yield function with an exponent of 4 provides closer agreement with the experimental results than other yield functions. Consequently, the anisotropic yield functions significantly affect the predictive accuracy of the deformation behavior of the steel sheet subjected to hole expansion, and the biaxial tensile test is effective for identification of the appropriate anisotropic yield function to be used for hole expansion simulation.     

EM-based policy hyper parameter exploration: application to standing and balancing of a two-wheeled smartphone robot

This paper proposes a novel policy search algorithm called EM-based Policy Hyper Parameter Exploration (EPHE) which integrates two reinforcement learning algorithms: Policy Gradient with Parameter Exploration (PGPE) and EM-based Reward-Weighted Regression. Like PGPE, EPHE evaluates a deterministic policy in each episode with the policy parameters sampled from a prior distribution given by the policy hyper parameters (mean and variance). Based on EM-based Reward-Weighted Regression, the policy hyper parameters are updated by reward-weighted averaging so that gradient calculation and tuning of the learning rate are not required. The proposed method is tested in the benchmarks of pendulum swing-up task, cart-pole balancing task and simulation of standing and balancing of a two-wheeled smartphone robot. Experimental results show that EPHE can achieve efficient learning without learning rate tuning even for a task with discontinuities.     

Fretting fatigue behaviour of Ni-free high-nitrogen stainless steel in a simulated body fluid

Abstract

Fretting fatigue behaviour of Ni-free high-nitrogen steel (HNS) with a yield strength of about 800 MPa, which was prepared by nitrogen gas pressurized electroslag remelting, was studied in air and in phosphate-buffered saline (PBS(-)). For comparison, fretting fatigue behaviour of cold-rolled SUS316L steel (SUS316L(CR)) with similar yield strength was examined. The plain fatigue limit of HNS was slightly lower than that of SUS316L(CR) although the former had a higher tensile strength than the latter. The fretting fatigue limit of HNS was higher than that of SUS316L(CR) both in air and in PBS(-). A decrease in fatigue limit of HNS by fretting was significantly smaller than that of SUS316L(CR) in both environments, indicating that HNS has better fretting fatigue resistance than SUS316L(CR). The decrease in fatigue limit by fretting is discussed taking into account the effect of friction stress due to fretting and the additional influences of wear, tribocorrosion and plastic deformation in the fretted area.