Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Oil Families and Their Potential Sources in the Southern Gulf of Suez, Egypt

Four oil families are identified in the southern Gulf of Suez, through high-resolution geochemical studies including gas chromatography, gas chromatography-mass spectrometry, and carbon isotope analyses. Biological features characterize oils in family 1a, suggesting tertiary carbonate source rocks for these oils, rich in type II organic matter and deposited under anoxic depositional environment. Family 1b oil shows minor variations in the source of organic matter and the depositional environment, as it was derived from carbonate source rock with more algal and bacterial contribution and minor input of terrestrial organic sources, deposited under less saline condition compared to family 1a oil. Family 2 oil, although genetically related to family 1a oil, has some distinctive features, such as diasterane to sterane and pristane to phytane ratios, which suggest clay-rich source rocks and a more oxic depositional environment. Also, the lack of oleanane indicates pre-tertiary source rocks for this oil. In contrast, family 3 oil is of mixed sources (marine and non-marine), generated from low sulfur and clay-rich source rock of tertiary and/or younger age. Family 4 oil seems to be mixed from family 1b and family 3 oils, sourced mainly from carbonate source rocks rich in clay minerals with algal and bacterial contributions. Family 4 oil is highly mature, family 1b oil lies within equilibrium values (peak oil generation stage), while the other families are more or less near equilibrium.     

Catalytic properties of composite amorphous carbon-platinum layers in fuel cells

Catalytic properties of composite amorphous carbon-platinum layers produced by magnetron cosputtering have been studied. The layers were characterized by electron microscopy, IR spectroscopy, ellipsometry, gravimetry, and spectrophotometric chemical analysis. The catalytic activity of the layers was studied in an air-hydrogen fuel cell by measuring its load and power characteristics.     

Model for Nanoscopic Domain Formation in Dipalmitoyl-PC/Dilauroyl-PC/Cholesterol Mixture

We describe the lyotropic liquid crystalline phase transitions in the lipid mixture dipalmitoil-PC/dilauroy-PC/cholesterol by 3D spin-1 lattice model. The formation of nanoscale domains with the characteristic size about 300 nm was studied in experiments on confocal fluorescence microscopy (CFM) (G. V. Feigenson and J. T. Buboltz, Biophys. J. 80, 2775 (2001)). The structure parameters of the lamellar vesicle in dipalmitoil-PC-rich phase, corresponding to these regions, are verified by numerical Monte Carlo simulations on the lattice. We point its superconductivity analogy properties at the region of phase stability for composition-dependent nanoscopic region.     

Corrosion of tin in citric acid solution and the effect of some inorganic anions

The corrosion behaviour of tin in different concentrations of citric acid solutions (0.3–1.0 M, pH=1.8) was studied at 30 °C by potentiodynamic technique. The E/I profiles exhibit an active passive behaviour. The active dissolution involves one anodic peak A associated with a dissolution of the metals as Sn(II) species. The passivity is due to the formation of thin film of SnO₂ and or Sn(OH)₄ on the anode surface. The cathodic sweep shows a small peak C related to the reduction of the passive film. The peak current density I_p of peak A increases with increasing both acid concentration and sweep rate.

The effects of adding increasing concentrations of Na₂CrO₄, NaMoO₄, NaNO₃ and NaNO₂ on the corrosion of tin in 0.5 M citric acid at 30 °C were investigated. Both CrO₄²⁻ and MoO₄²⁻ ions inhibit the corrosion of tin and the extent of inhibition enhances with their concentrations. Addition of either NO₃⁻ or NO₂⁻ accelerates the corrosion of tin. NO₃⁻ ions are more aggressive than NO₂⁻ ions.     

Urban growth and environmental degradation: The case of Cairo, Egypt

The immense growth of cities, especially in developing countries, is resulting in the urbanization of both poverty and environmental degradation to a greater degree than ever before. This paper examines the processes of growth and degradation in the Greater Cairo Metropolitan Region (GCMR), currently the world’s tenth largest mega-city. It reviews the region’s growth and selected environmental issues as well as impacts of current efforts on managing the region. The assertion of this paper is that current management policies and bodies lack a comprehensive view of urban governance for the region, which does not bode well for the future environmental and economic sustainability of the region.     

Iterative interference cancellation for high spectral efficiencysatellite communications

The problem of efficient utilization of the frequency spectrum for satellite systems is investigated; one which results as a consequence of highly crowding adjacent channels. An analytical characterization of the resulting interference channel is introduced and then exploited for interference cancellation. Two classes of cancelers are investigated. The first approach does not benefit from the forward error control (FEC) coding information which limits the performance gain. This motivates the second approach where a joint implementation of interference cancellation and decoding is developed using soft-input-soft-output (SISO) modules along with the iterative structure. It is shown that iterative interference cancellation techniques can achieve significant gains compared with the single-user matched filter receiver     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.