Experimental investigation of surface crack initiation, propagation and tension stiffening in self-compacting steel–fibre-reinforced concrete

To investigate crack initiation and propagation in reinforced, self-compacting, steel?Cfibre-reinforced concrete (SCSFRC) members, tie elements were tested in tension. Strain and surface crack formation were monitored with an optical strain measurement system based on digital image correlation. In addition, to capture the softening behaviour (???Cw) of the material, uni-axial tension testing was performed on SCSFRC cylinders. The results show that, with the optical strain measurement system, it was possible to detect different cracking modes and to follow the crack growth. It was especially of interest to recognize that high fibre amounts tend to change a sudden opening of a crack (as in non-fibrous concrete) into a more stable procedure. It was found that, for a given crack width, the SCSFRC specimens exhibited a noticeably higher tension stiffening than the specimens without fibres. Moreover, at a given load, the crack widths decreased by as much as 65% for the SCSFRC specimens with a nominal fibre content of 1%. For the uni-axial tension tests the results showed that with higher fibre content, for this type of fibre and concrete, both the peak stress and the residual tensile stress were increased. Additionally, it was noted for both specimen types that the scatter in fibre distribution decreased with increasing fibre content.     

Long-term performance assessment of the Telegraph Road Bridge using a permanent wireless monitoring system and automated statistical process control analytics

The purpose of this study is to advance wireless sensing technology for permanent installation in operational highway bridges for long-term automated health assessment. The work advances the design of a solar-powered wireless sensor network architecture that can be permanently deployed in harsh winter climates where limited solar energy and cold temperatures are normal operational conditions. To demonstrate the performance of the solar-powered wireless sensor network, it is installed on the multi-steel girder bridge carrying northbound I-275 traffic over Telegraph Road (Monroe, Michigan) in 2011; a unique design feature of the bridge is the use of pin and hanger connections to support the bridge main span. A dense network of strain gauges, accelerometers and thermometers are installed to acquire bridge responses of interest to the bridge manager including responses that would be affected by long-term bridge deterioration. The wireless monitoring system collects sensor data on a daily schedule and communicates the data to the Internet where it is stored in a curated data repository. Bridge response data in the repository are autonomously processed to extract truck load events using machine learning, compensate for environmental variations using nonlinear regression and to quantitatively assess anomalous bridge performance using statistical process control.     

Bi-level optimization for a dynamic multiobjective problem

In this article, a bi-level optimization problem covering upper (design) and lower (operation) levels is defined and a solution procedure for bi-level optimization problems is presented. This is devised as a dynamic multiobjective optimization problem, i.e. the values of the control and state variables change over a predefined time horizon and several competing criteria are optimized simultaneously. Moreover, the interaction between the upper and lower levels is analysed. The benefits of bi-level dynamic multiobjective optimization are illustrated in detail by examining an industrial case in which the design of a paper mill (upper level) and the mill operation (lower level) are optimized at the same time. However, the problem definition and the solution procedure are not limited to any specific application but can be exploited in many different industrial areas.     

Herd-level risk factors associated with cow mortality in Swedish dairy herds

An increase in on-farm mortality (euthanasia and death) in dairy herds has been reported in several countries in the last decade. This does not only imply possible problems with animal welfare, but it also causes economic losses to the farmer. The objective of this study was to evaluate time trends in on-farm dairy cow mortality in Sweden and identify potential herd-level risk factors. Data were retrieved on all Swedish dairy herds enrolled in the milk recording scheme between 2002 and 2010. Herds with a herd size of <20 cows or a mortality rate (MR) of >40 dead or euthanized cows per 100 cow-years were excluded. Two different models were used: 1 multiple-year analysis, which included 6,898 herds during the period 2002 to 2010 and 1 single-year analysis including 4,252 herds for the year 2010, where other variables that were not present during the entire multiple year study were analyzed. The outcome variable was the number of euthanized and dead cows per year and season. A negative binomial regression model, adjusted for clustering within herd, was applied to both models. Fixed effects in the multiple-year analysis were breed, calving interval, herd size, milk yield, region, season, pasture period, and year. The fixed effects in the single-year analysis were breed, calving interval, conventional versus organic farming, herd size, housing system, milk yield, region, and season. The results demonstrated that MR gradually increased from 5.1 to 6.6 events per 100 cow-years during the study period. Swedish MR are consequently on par with, or even greater than, MR among dairy herds in other comparable countries. Higher mortality was associated with larger herd size, longer calving intervals, and herds that had Swedish Holstein as the predominant breed. Lower mortality was observed in herds with a higher herd average milk yield, during the fall and winter, and in organically managed herds. There were regional differences in mortality. An interaction between herd size and season was found in both models. Also, an interaction between housing system and milk yield was found in the single-year analysis. This first assessment of on-farm mortality in Swedish dairy herds confirmed that the MR has increased over the last few years. The study also identified some herd-level risk factors.     

Packaging materials with tailor made light transmission properties for food protection

Packaging material with optimal light barrier properties can prevent food quality deterioration. For dairy products, wavelength in the visible region between 400–450 nm and 600–650 nm should be blocked out due to the content of chlorophyll in dairy products. Six low density polyethylene blown films were formulated with the combination of four different pigments and additives: green, yellow, silver additive, and optical brightener, in addition to four reference samples. All films were transparent. Optical properties and light transmission were measured for each film, and microscopy analyses were used to investigate the surface topography. The sample containing high concentration of both green and yellow pigments had the lowest value in gloss and transmittance. This film blocked the light below 450 nm and transmitted 10% at 600–650 nm. Optical brightener had an effect only on visual appearance but not on light transmission properties. Samples containing silver additive were more intense green and gave a higher light transmission in blue region (380–500 nm) and lower in red region (600–700 nm) compared with samples without silver additive. These developed films can be applied in dairy products and other food products in the future. POLYM. ENG. SCI., 52:2015–2024, 2012. © 2012 Society of Plastics Engineers     

Arctic vegetation damage by winter-generated coal mining pollution released upon thawing

Acid mine drainage (known as AMD) is a well-known environmental problem resulting from the oxidation of sulfidic mine waste. In cold regions, AMD is often considered limited by low temperatures most of the year and observed environmental impact is related to pollution generated during the warm summer period. Here we show that heat generation within an oxidizing, sulfidic, coal-mining waste-rock pile in Svalbard (78 degrees N) is high enough to keep the pile warm (roughly 5 degrees C throughout the year) despite mean annual air temperatures below -5 degrees C. Consequently, weathering processes continue year-round within the waste-rock pile. During the winter, weathering products accumulate within the pile because of a frozen outer layer on the pile and are released as a flush within 2 weeks of soil thawing in the spring. Consequently, spring runoff water contains elevated concentrations of metals. Several of these metals are taken up and accumulated in plants where they reach phytotoxic levels, including aluminum and manganese. Laboratory experiments document that uptake of Al and Mn in native plant species is highly correlated with dissolved concentrations. Therefore, future remedial actions to control the adverse environmental impacts of cold region coal-mining need to pay more attention to winter processes including AMD generation and accumulation of weathering products.     

Multifunctional carbon-nanotube cellular endoscopes

Glass micropipettes, atomic force microscope tips and nanoneedles can be used to interrogate cells, but these devices either have conical geometries that can damage cells during penetration or are incapable of continuous fluid handling. Here, we report a carbon-nanotube-based endoscope for interrogating cells, transporting fluids and performing optical and electrochemical diagnostics at the single organelle level. The endoscope, which is made by placing a multiwalled carbon nanotube (length, 50-60?μm) at the tip of a glass pipette, can probe the intracellular environment with a spatial resolution of ～100?nm and can also access organelles without disrupting the cell. When the nanotube is filled with magnetic nanoparticles, the endoscope can be remotely manoeuvered to transport nanoparticles and attolitre volumes of fluids to and from precise locations. Because they are mounted on conventional glass micropipettes, the endoscopes readily fit standard instruments, creating a broad range of opportunities for minimally invasive intracellular probing, drug delivery and single-cell surgery.     

Distribution of microbes in supercritical CO2 extraction of sea buckthorn (Hippopha? rhamnoides) oils

 The distribution of vegetative microbial cells and their spores in a supercritical CO₂ extraction process was studied. The seed and flesh/skin fractions of the press residue of sea buckthorn berries (Hippopha? rhamnoides) from a juice factory were used as raw materials. A pilot-scale extraction plant was operated at 30 MPa at temperatures of 40 and 60°C. The number of yeasts, moulds and bacteria in the pulp/skin fraction, in the extraction residues, in the extracted oils as well as in the water phases separated from the extracted oils was estimated by the spread plate technique. The microbial content of the flesh/skin material was increased in some extractions by the addition of bacterial spores. In general, the extraction process led to a decrease in the bacterial count of the extracted material, whereas no microbial growth was detected in the oils extracted or in the water phases separated from them. Neither yeasts nor moulds were found in any samples after the extraction process. The microbial status of seed oil and flesh/skin oil obtained by industrial-scale CO₂ extraction at 40°C and at 30 MPa before and after gelatine encapsulation remained unchanged. This proves that supercritical CO₂ can be used to manufacture edible oil products free of living micro-organisms and their spores. Received: 14 May 1996     

The Cost Evaluation of Advanced Oxidation Processes in Laboratory and Pilot-Scale Experiments

The present level of the development of water/wastewater treatment methods, including advanced oxidation processes, allows removal of pollutants of wide spectrum under no question. However, the overall process cost and, especially, associated energy consumption are of increased importance. The present review presents the energy cost calculations made for the pollutants removal reported in more than forty publications for over the last four decades. Phenol, glycols, methyl-tert-butyl ether (MTBE), aliphatic unsaturated compounds, humic acids and lignin were considered as water pollutants for economic evaluation of their removal. Two oxidation processes, ozonation and Fenton reaction, were chosen as water treatment methods.     

Structural,mechanical and electrical-contact properties of nanocrystalline-NbC/amorphous-C coatings deposited by magnetron sputtering

Niobium-carbide nanocomposite coatings with a carbon content varying from 43 to 64 at.% were deposited by dual DC magnetron sputtering. X-ray diffraction, x-ray photoelectron spectroscopy and electron microscopy showed that all coatings consisted of nanometer sized NbC grains embedded in a matrix of amorphous carbon. Mechanical properties and electrical resistivity showed a strong dependency on the amount of amorphous carbon (a-C) and NbC grain size in the coating. The highest hardness (23 GPa), elastic modulus (295 GPa) and the lowest resistivity (260 μΩ cm) were measured for the coating with about 15% of a-C phase. Contact resistance measurements using a crossed cylinder set-up showed lowest contact resistance for the coating containing 33% a-C (140 μΩ at a contact force of 100 N), which is comparable to a Ag reference (45 μΩ at a contact force of 100 N). Comparison with TiC-based nanocomposites studied under similar conditions showed that the NbC system has less tendency to form a-C and that lowest contact resistance is obtained at comparable amounts of a-C phase in both material systems (33% for NbC compared to 35% for TiC). With these good electrical contact properties, the NbC nanocomposites can be considered as a potential material for electrical contact applications.