Adaptive Immune Responses in a Multiple Sclerosis Patient with Acute Varicella-Zoster Virus Reactivation during Treatment with Fingolimod

Fingolimod, an oral sphingosine 1-phosphate (S1P) receptor modulator, is approved for the treatment of relapsing forms of multiple sclerosis (MS). The interference with S1P signaling leads to retention particularly of chemokine receptor-7 (CCR7) expressing T cells in lymph nodes. The immunological basis of varicella zoster virus (VZV) infections during fingolimod treatment is unclear. Here, we studied the dynamics of systemic and intrathecal immune responses associated with symptomatic VZV reactivation including cessation of fingolimod and initiation of antiviral therapy. Key features in peripheral blood were an about two-fold increase of VZV-specific IgG at diagnosis of VZV reactivation as compared to the previous months, a relative enrichment of effector CD4+ T cells (36% versus mean 12% in controls), and an accelerated reconstitution of absolute lymphocytes counts including a normalized CD4+/CD8+ ratio and reappearance of CCR7+ T cells. In cerebrospinal fluid (CSF) the lymphocytic pleocytosis and CD4+/CD8+ ratios at diagnosis of reactivation and after nine days of fingolimod discontinuation remained unchanged. During this time CCR7+ T cells were not observed in CSF. Further research into fingolimod-associated VZV reactivation and immune reconstitution is mandatory to prevent morbidity and mortality associated with this potentially life-threatening condition.     

Mild Stereoselective Intermolecular Acetoxylation and Azidation of α‐C−H Bonds in Tröger's Bases

Introduction of oxygen and nitrogen into organic molecules is one of the fundamental strategies for their functionalization. Traditional approaches rely on the formation of an activated intermediate, which is then modified in a subsequent step. Here we report a simple direct oxidative α‐acetoxylation and azidation of α‐C−H bonds in Tröger's base analogues promoted by N‐bromosuccinimide (NBS) and palladium(II)acetate [Pd(OAc)₂] under mild conditions. This approach is pivotal on NBS oxidizing the carbon atoms next to the nitrogen atoms in the presence of Pd(OAc)₂ followed by a reaction with oxygen‐ or nitrogen‐centred nucleophiles such as KOAc or NaN₃ to yield either the mono‐ and bisacetoxylated or azidated Tröger's base derivatives in a stereo‐ and chemoselective manner. The obtained products can be efficiently modified to access synthetically meaningful structures.

     

Synthesis and characterization of amino-functional, blue light-emitting copolymers and their composites with CdTe nanocrystals

Random side-chain functionalized copolymers were synthesized, utilizing a facile Yamamoto protocol by applying 2,7-dibromo-9,9-bis(6-bromohexyl)-9H-fluorene, (E)-1,2-bis(4-bromophenyl)ethene, 2,7-dibromo-9,9-dioctyl-9H-fluorene as comonomers. The precursor copolymers were post-functionalized utilizing di-n-propylamine and the resulting target copolymers were fully characterized. The optical classification parameters have been determined in solutions and in thin films as well. The copolymers revealed blue light emission, wide optical bandgaps Eg_opt of at least 2.84 eV and remarkable quantum yields up to 0.78 in chloroform solutions. The amino-functional copolymers allowed tying semiconductor CdTe nanocrystals.     

Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2

This study presents the development of an improved technique for viscosity measurements under high pressure. The apparatus is based on the principle of the falling ball viscometer, implemented in a high-pressure autoclave fitted with visualisation windows. The originality here is that the balls fall through a tube open at both ends with a diameter slightly greater than that of the balls, allowing a simplified modelling and numerical simulation. A numerical approach has been used for viscosity determination. Calculations have been made with COMSOL Multiphysics^® with the laminar Navier-Stokes model for Newtonian mixtures. It includes the specific hydrodynamic effects without the need for a calibration fluid. However, validation experiments were carried out at atmospheric pressure with dimethylsulfoxide (DMSO) at 298, 308 and 318 K and with cocoa butter at 313 and 353 K, with values of viscosity in the range from 1.4 to 45.4 mPa s. Comparative measurements with literature data have been conducted with cocoa butter saturated with carbon dioxide at 313 and 353 K and for pressures ranging from 0.1 to 25 MPa. At 313 K, viscosity varies from 45.4 mPa s to 3.1 mPa s while at 353 K it varies from 12.4 to 1.9 mPa s. For both isotherms tested, within the range 0-15 MPa, the higher the CO₂ dissolution in the cocoa butter, the lower the viscosity. However, this decrease in viscosity is more pronounced at the lowest temperature. Above 15 MPa the CO₂ dissolution effect on viscosity becomes insignificant, i.e. within the experimental error, due to a counter effect linked with the high hydrostatic pressure. Furthermore, the limits of use of this method have been determined. This technique is revealed as reliable and can therefore be used with other binary systems.     

Prospective Validation of a Comprehensive In silico hERG Model and its Applications to Commercial Compound and Drug Databases

Ligand‐based in silico hERG models were generated for 2 644 compounds using linear discriminant analysis (LDA) and support vector machines (SVM). As a result, the dataset used for the model generation is the largest publicly available (see Supporting Information). Extended connectivity fingerprints (ECFPs) and functional class fingerprints (FCFPs) were used to describe chemical space. All models showed area under curve (AUC) values ranging from 0.89 to 0.94 in a fivefold cross‐validation, indicating high model consistency. Models correctly predicted 80 % of an additional, external test set; Y‐scrambling was also performed to rule out chance correlation. Additionally models based on patch clamp data and radioligand binding data were generated separately to analyze their predictive ability when compared to combined models. To experimentally validate the models, 50 of the predicted hERG blockers from the Chembridge database and ten of the predicted non‐hERG blockers from an in‐house compound library were selected for biological evaluation. Out of those 50 predicted hERG blockers, tested at a concentration of 10 μM , 18 compounds showed more than 50 % displacement of [³H]astemizole binding to cell membranes expressing the hERG channel. K_i values of four of the selected binders were determined to be in the micromolar and high nanomolar range (K_i (VH 01 )=2.0 μM , K_i (VH 06 )=0.15 μM , K_i (VH 19 )=1.1 μM and K_i (VH 47 )=18 μM ). Of these four compounds, VH 01 and VH 47 showed also a second, even higher affinity binding site with K_i values of 7.4 nM and 36 nM , respectively. In the case of non‐hERG blockers, all ten compounds tested were found to be inactive, showing less than 50 % displacement of [³H]astemizole binding at 10 μM . These experimentally validated models were then used to virtually screen commercial compound databases to evaluate whether they contain hERG blockers. 109 784 (23 %) of Chembridge, 133 175 (38 %) of Chemdiv, 111 737 (31 %) of Asinex and 11 116 (18 %) of the Maybridge database were predicted to be hERG blockers by at least two of the models, a prediction which could, for example, be used as a pre‐filtering tool for compounds with potential hERG liabilities.     

Permeability of low molecular weight organics through nanofiltration membranes

The removal of natural organic matter (NOM) using nanofiltration (NF) is increasingly becoming an option for drinking water treatment. Low molecular weight (LMW) organic compounds are nevertheless only partially retained by such membranes. Bacterial regrowth and biofilm formation in the drinking water distribution system is favoured by the presence of such compounds, which in this context are considered as the assimilable organic carbon (AOC). In this study, the question of whether NF produces microbiologically stable water was addressed. Two NF membranes (cut-off of about 300 Da) were tested with different natural and synthetic water samples in a cross-flow filtration unit. NOM was characterised by liquid chromatography with organic carbon detection (LC-OCD) using a size-exclusion column in addition to specific organic acid measurements, while AOC was measured in a batch growth bioassay.Similarly to high molecular weight organic compounds like polysaccharides or humic substances that have a permeability lower than 1%, charged LMW organic compounds were efficiently retained by the NF membranes tested and showed a permeability lower than 3%. However, LMW neutrals and hydrophobic organic compounds permeate to a higher extent through the membranes and have a permeability of up to 6% and 12%, respectively. Furthermore, AOC was poorly retained by NF and the apparent AOC concentration measured in the permeated water was above the proposed limit for microbiologically stable water. This indicates that the drinking water produced by NF might be biologically unstable in the distribution system. Nevertheless, in comparison with the raw water, NF significantly reduced the AOC concentration.     

GC–MS analysis of oxysterols and their formation in cultivated liver cells (HepG2)

Oxysterols play a key role in many (patho)physiological processes and they are potential biomarkers for oxidative stress in several diseases. Here we developed a rapid gas chromatographic-mass spectrometry-based method for the separation and quantification of 11 biologically relevant oxysterols bearing hydroxy, epoxy, and dihydroxy groups. Efficient chromatographic separation (resolution ≥ 1.9) was achieved using a medium polarity 35%-diphenyl/65%-dimethyl polysiloxane stationary phase material (30 m × 0.25 mm inner diameter and 0.25 μm film thickness). Based on thorough analysis of the fragmentation during electron ionization we developed a strategy to deduce structural information of the oxysterols. Optimized sample preparation includes (i) extraction with a mixture of n-hexane/iso-propanol, (ii) removal of cholesterol by solid phase extraction with unmodified silica, and (iii) trimethylsilylation. The method was successfully applied on the analysis of brain samples, showing consistent results with previous studies and a good intra- and interday precision of ≤20%. Finally, we used the method for the investigation of oxysterol formation during oxidative stress in HepG2 cells. Incubation with tert-butyl hydroperoxide led to a massive increase in free radical formed oxysterols (7-keto-chol > 7β-OH-chol >> 7α-OH-chol), while 24 h incubation with the glutathione peroxidase 4 inhibitor RSL3 showed no increase in oxidative stress based on the oxysterol pattern. Overall, the new method described here enables the robust analysis of a biologically meaningful pattern of oxysterols with high sensitivity and precision allowing us to gain new insights in the biological formation and role of oxysterols.     

Sensory acceptability of raw and extruded bovine rumen protein in processed meat products

The use of bovine rumen protein (raw and extruded) as a replacement for extruded soy protein concentrate in three meat products (pork sausage, chicken hamburger, and kibbe) was investigated. Similarity between rumen and soy protein meat products was assessed using triangle tests and sensory acceptability evaluated by consumer panelists using a nine-point hedonic scale. The addition of raw rumen protein was detected in all meat product types tested, while extruded rumen protein was only detected in kibbe. The addition of raw rumen protein decreased the acceptability of pork sausage aroma and flavor, but improved kibbe appearance, texture and overall acceptability. The addition of extruded rumen protein reduced the acceptability of chicken hamburger texture, but improved pork sausage flavor. Replacement of soy protein by bovine rumen protein is feasible based upon sensory results, but depended upon its form and the type of meat product to which it was added.     

Bioactivity and metabolism of trans-resveratrol orally administered to Wistar rats

The purpose of this study was to investigate the implications of selected chemopreventive parameters and metabolic conversion of resveratrol in vivo. In two 8-week long feeding experiments with rats, a low-resveratrol diet containing 50 mg resveratrol per kg body weight (bw) and day and a high-resveratrol diet with 300 mg per kg bw and day were administered. For chemopreventive evaluation selected phase I and phase II enzymes of the biotransformation system, the total antioxidant activity, and the vitamin E status of the animals were determined. The level of resveratrol and its metabolites in the feces, urine, plasma, liver, and kidneys was identified and quantitated by high-performance liquid chromatography-diode array detection (HPLC-DAD) using synthesized resveratrol conjugate standards. Feeding of different dosages of resveratrol revealed no effect on the different chemopreventive parameters, except for the total antioxidant activity, which was elevated in plasma by 19% after feeding 50 mg resveratrol per kg bw and day. The formation of trans-resveratrol-3-sulfate, trans-resveratrol-4'-sulfate, trans-resveratrol-3,5-disulfate, trans-resveratrol-3,4'-disulfate, trans-resveratrol-3,4',5-trisulfate, trans-resveratrol-3-O-beta-D-glucuronide, and resveratrol aglycone was detected by HPLC analysis, depending on the biological material. Total resveratrol recovery in urine and feces of rats fed on 50 mg resveratrol per kg bw and day was 15% and 13%, respectively. For rats fed the higher dosage of 300 mg resveratrol per kg bw and day recovery was 54% and 17%, respectively. This is the first study performed with synthesized standards of relevant resveratrol conjugates. The lack of effect on the chemopreventive parameters is probably due to the formation of various resveratrol conjugates reducing its bioavailability in the rat.     

Microbial degradation of rice and barley straws in the sheep rumen and the donkey caecum

The chemical composition, intake, digestibility, ultrastructure and microbial degradation of rice straw from Camargue were compared with barley straw. These variables were observed in two different herbivore digestive ecosystems: the sheep rumen and the donkey caecum. The two straws differed essentially in their ash content, which was three times higher in rice, owing to its silica content. Other chemical components were comparable, except a higher phenolic acids‐to‐lignin ratio in rice. Rice straw was better ingested than barley straw. Organic matter and neutral detergent fibre digestibilities were the same in both straws. Dry matter and cell wall disappearances could be adjusted to the exponential modelling equation with lag time, and differed between animals but not between straws. The sheep rumen had a higher extent of degradation, but the donkey caecum had a higher degradation rate. Statistical analysis revealed that cell‐wall components degradation was similar in the two straws except for ferulic acid, which was more degraded in rice straw. Scanning electron microscopy showed important differences in parenchyma degradation, which was much more effective in rice. Copyright © 2003 Society of Chemical Industry