Improved methods for evaluating the molar mass distributions of cellulose in kraft pulp

Multi‐angle laser light scattering (MALLS) was used to characterize birch kraft pulps with respect to their absolute molecular mass distributions (MMDs). The pulps were dissolved in lithium chloride/N,N‐dimethylacetamide and separated by size exclusion chromatography (SEC). The weight‐average and number‐average molecular masses of the cellulose fractions of the pulps obtained from the absolute MALLS measurements were compared with the molar masses obtained by direct‐standard‐calibration relative pullulan standards. Discrepancies between the two detection methods were found, and two ways of correlating the relative pullulan molar masses to the absolute molar masses were examined. In the first method, the correlation was made over a large range of molecular masses. The second method correlated the molecular masses of the standards to the molecular masses of samples by the calculation of fictitious, cellulose‐equivalent molar masses of the standards. With the preferred second method, a more correct MMD of kraft pulp samples could, therefore, be obtained from an SEC system calibrated with narrow standards. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1170–1179, 2003     

Calcium silicate hydrate—in-situ development of the silicate structure followed by infrared spectroscopy

In the current study, the development of the silicate structure of synthetic calcium silicate hydrates with different calcium contents was followed by in-situ infrared (IR) spectroscopy and correlated to the in-situ phase development evaluated by X-ray diffraction (XRD). A baseline correction method initially developed for X-ray diffractograms was successfully adapted for the complex background of the fingerprint region in in-situ IR, which significantly contributed to signal quality and reproducibility. The development of separate silicate infrared bands could be monitored over 24 h of reaction. These bands could be assigned to oligomeric and dimeric species based on their time and stoichiometry-dependent development. It was clearly shown that the main peak of the dimeric silicate species was overlooked in the literature. The correlation of time-dependent events to in-situ XRD revealed that changes in the unit cell of calcium silicate hydrate are related to silicate polymerization. The results were compared to ²⁹Si-MAS-NMR, which highlighted the benefits of in-situ IR spectroscopy.     

Host Plant Constancy in Ovipositing Manduca sexta

Journal of Chemical Ecology - Many pollinating insects exhibit flower constancy, i.e. they target flower species they have already experienced and fed from. While the insects might profit from...     

Atomic force microscopy at ambient and liquid conditions with stiff sensors and small amplitudes

We report on atomic force microscopy (AFM) in ambient and liquid environments with the qPlus sensor, a force sensor based on a quartz tuning fork with an all-electrical deflection measurement scheme. Small amplitudes, stiff sensors with bulk diamond tips and high Q values in air and liquid allow to obtain high resolution images. The noise sources in air and liquid are analyzed and compared for standard silicon cantilevers and qPlus sensors. First, epitaxial graphene was imaged in air, showing atomic steps with 3 A? height and ridges. As a second sample system, measurements on calcite (CaCO(3)) in liquids were performed in water and polyethylenglycol (PEG). We demonstrate high resolution images of steps in PEG on calcite and nanolithography processes, in particular with frequency-modulation AFM the controlled dissolution of calcite monolayers.     

Development and pilot testing of the Neuromuscular Blockade Advisory System

The neuromuscular blocker advisory system (NMBAS) is a computer program developed to provide advisory guidance to anesthesiologists on the timing and dose of rocuronium to paralyze patients during surgery. It is believed that the use of such a system will administer the minimally effective amount of drug, maintaining the patient in a state of paralysis that is useful for surgery yet easily reversible. This will improve patient safety and result in more efficient care. In this paper we present the NMBAS, its basic methodology, and its development though a pilot study. Novel methods of handling neuromuscular response data are presented, including relaxation measurement and the enhanced-train-of-four sensing modality. New methods of handling nonlinearities at the neuromuscular junction to allow application of adaptive control techniques are presented. A novel form of modelling combining model swapping and RLSE adaptation to accommodate the patient variation seen with NMB drugs is introduced. A pilot study testing the NMBAS was undergone to prepare the NMBAS for application in a full clinical trial, in which patients undergoing prostate brachytherapy surgeries using rocuronium for intubation were admitted.     

Copper planar microcoils applied to magnetic actuation

Recent advances in microtechnology allow realization of planar microcoils. These components are integrated in MEMS as magnetic sensor or actuator. In the latter case, it is necessary to maximize the effective magnetic field which is proportional to the current passing through the copper track and depends on the distance to the generation microcoil. The aim of this work was to determine the optimal microcoil design configuration for magnetic field generation. The results were applied to magnetic actuation, taking into account technological constraints. In particular, we have considered different realistic configurations that involve a magnetically actuated device coupled to a microcoil. Calculations by a semi-analytical method using Matlab software were validated by experimental measurements. The copper planar microcoils are fabricated by UV micromoulding on different substrates: flexible polymer (Kapton^®) and silicate on silicon. They are constituted by a spiral-like continuous track. Their total surface is about 1 mm².     

Magnetic Properties of Thermal Sprayed Tungsten Carbide–Cobalt Coatings

In the information age, the storage and accessibility of data is of vital importance. There are several possibilities to fulfill this task. Magnetic storage of data is a well‐established method and the range of materials used is continuously extended. In this study, the magnetic remanence of thermally sprayed tungsten carbide–cobalt (WCCo)‐coatings in dependence of their thickness is examined. Two magnetic fields differing in value and geometry are imprinted into the coatings and the resulting remanence field is measured. It is found that there are two effects, which in combination determine the effective value of the magnetic remanence usable for magnetic data storage.

     

Antioxidant enzyme activities in beef in relation to oxidation of lipid and myoglobin

Lipid- and oxy-free radical generation has been implicated in oxidative processes which occur during meat maturation but the importance of the antioxidant enzyme (AOE) activity in these processes is not known. It was shown that metmyoglobin (MetMb) % and lipofuscin content were higher in colour-unstable muscles such as psoas major (PM) and diaphragma (D) compared to longissimus lumborum (LL) and tensor fasciae latae (TFL). Although Superoxide dismutase (SOD) activity is higher post mortem in PM and D muscles than in LL and TFL muscles, catalase and glutathione peroxidase (GPx) activities were higher only in D muscle. The higher AOE activity in colour-unstable muscles such as PM and D was not sufficient to prevent increased formation of MetMb and lipofuscin in these muscles compared to LL and TFL muscles.