Characterisation of electrodeposited nanocrystalline Ni–Mo alloys

Ni–Mo nanocrystalline layers were electrodeposited using direct current from citrate–ammonia solutions. The quartz crystal microbalance investigation confirms that the discharge process starts with hydrogen evolution before the onset of the alloy deposition. The grain size was estimated from X-ray line broadening. It decreases when the molybdenum content is increased. It is smaller for layers deposited at pH 9.5 than 8.5. The microhardness exhibits a maximum close to 800 Vickers for _Mo around 17 wt%. For higher _Mo a softening is observed showing a deviation from Hall-Petch behaviour due to small grain size. In deaerated hydrochloric solutions, the layers show a large passivation domain without any pitting. The corrosion currents as well as the passivation currents, higher than for the bulk Hastelloy B alloy, decrease when _Mo is increased.     

Dissolution of softwood kraft pulps by direct derivatization in lithium chloride/N,N‐dimethylacetamide

A method for the characterization of the molar mass distributions (MMDs) of softwood kraft pulps dissolved in 0.5% lithium chloride (LiCl)/N,N‐dimethylacetamide (DMAc) by size exclusion chromatography is presented. The method is based on derivatization with ethyl isocyanate and the dissolution of samples in 8% LiCl/DMAc. In this study, the derivatization of hardwood kraft pulps did not influence the MMD. In the case of softwood pulps, however, the derivatization decreased the proportion of the high‐molecular‐mass material and increased the proportion of the low‐molecular‐mass material, which resulted in a distribution similar to the MMD of a hardwood kraft pulp. The results suggest that associations between hemicellulose and cellulose in the softwood kraft pulp were ruptured during derivatization. This led to a more correct estimation of the MMD of derivatized softwood kraft pulps than obtained by the dissolution of nonderivatized samples. This new method offers several advantages over derivatization with phenyl isocyanate: a precipitation step is not necessary, it is possible to follow the lignin distribution in the samples, and the method allows very high levels of dissolution of softwood kraft pulps up to a κ number of around 50. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 424–431, 2004     

Numerical,wind-tunnel,and atmospheric evaluation of a turbulent ground-based inlet sampling system

The use of inlets for transferring aerosols from the environment to instrumentation can introduce uncertainty in the measurement of aerosol properties. Aerosol loss during this process is a non-negligible issue that may bias the subsequent measurements. These loss mechanisms include aspiration at the inlet head and deposition/evaporation/condensation during transport through the sampling lines. Coarse-mode aerosol is significantly impacted by the aspiration and inertial loss mechanisms within an inlet system. This work uses wind tunnel experiments to investigate aerosol losses through the Storm Peak Laboratory’s (SPL) new aerosol inlet system. The inlet is used extensively for both intensive field campaigns and long-term aerosol monitoring. The results of numerical simulations of the SPL aerosol inlet sampling efficiency are provided at several wind speeds, and experimental results demonstrate the system has a 50% cut off for the coarse-mode at an aerodynamic diameter of approximately 13?μm and wind speed of 0.5?m s^?1. This investigation will lead to improved accuracy of in situ aerosol measurements at SPL and this system can be replicated at other atmospheric stations.

Copyright © 2019 American Association for Aerosol Research     

Deformation behaviour of an advanced nickel-based superalloy studied by neutron diffraction and electron microscopy

Deformation mechanisms under tensile loading at room temperature have been studied in a polycrystalline nickel-based superalloy containing close to 50 vol.% γ′. In order to identify the effect of γ′ particle size on deformation mechanisms, model microstructures with unimodal γ′ size distributions were developed. The investigations were carried out by combining in situ loading experiments using neutron diffraction and two-site elasto-plastic self-consistent plasticity modelling with detailed post-mortem electron microscopy. The microscopy work also includes results for samples strained at 500 °C. During early plastic deformation, the diffraction data demonstrate that γ and γ′ display the same elastic strain response, indicating that at this stage γ′ is cut by dislocations regardless of the γ′ particle size. Scanning electron microscopy studies showed an abundance of shearing processes in all three microstructures, hence supporting the conclusions drawn from the diffraction experiment. As the material is further deformed, elastic load transfer from γ to γ′ was observed in the medium (130 nm) and coarse (230 nm) γ′ microstructures but not in the fine (90 nm) γ′ microstructure. The load transfer can be explained by assuming that Orowan looping becomes an additional operative deformation mode. Transmission electron microscopy confirmed that in the fine γ′ microstructure deformation takes place by strongly coupled dislocations cutting the γ′, while the medium and coarse γ′ microstructures showed additional signs of Orowan looping.     

TPA‐PPEs – New alternating donor copolymers for potential application in photovoltaic devices

A series of phenyleneethynylene copolymers with triphenylamine units as hole‐transporting moieties (TPA‐PPEs) were synthesized by the palladium‐catalyzed cross‐coupling polycondensation of diethynyltriphenylamines and selected dihalogen comonomers, for instance substituted benzene, thiophene, benzothiadiazole, or anthracene. Incorporation of the electron‐rich amino group into the PPE backbone does not interrupt the main chain conjugation. Furthermore, it has a decreasing effect on the oxidation potential, thus makes these polymers interesting as hole‐injection/hole‐transporting materials. The chemical structure of the new alternating copolymers was confirmed by ¹H and ¹³C NMR spectroscopy and elemental analysis and gel‐permeation chromatography (GPC; THF, M_n ≈ 15,000–30,000 g/mol) was conducted. Furthermore, their optical properties were investigated by UV/vis spectroscopy. The TPA‐PPEs exhibit absorption maxima at around 400 nm (π‐π*), except anthracene containing copolymer 3f (λ_max = 514 nm in THF) and benzothiadiazole containing one 3g (λ_max = 503 nm in THF). The TPA copolymers have oxidation potentials about 1.1 V (Ag/AgCl). They are good photoconducting materials ( 3a : I_Photo = 4 × 10^?10 A at 425 nm (400 V), 3g : I_Photo = 1.3 × 10^?11 A at λ_max = 500 nm (20 V)) and show emission after excitation at around 450 nm (560 nm 3f ). Their application in nonoptimized polymer solar cells (bulk heterojunction) led to power conversion efficiencies of around 1–1.8% after illumination with 100 mW/cm² of AM1.5. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Localized corrosion of (lean) duplex stainless steels in immersion units of urban wastewater treatment plants

With lower alloying cost and higher mechanical properties, lean duplex stainless steels can be an alternative to the more commonly used austenitic stainless steels. However, these alloys are still not the preferred choice, probably due to a lack of field experience. A study was thus initiated in view of defining the limits of use of selected (lean) duplexes for urban wastewater treatment units. The present paper shows the localized corrosion performance of selected lean duplexes in chloride contaminated solutions. The results are compared with austenitic S30403 and S31603 and with the more standard duplexes S82441 and S32205. The effect of welding was also investigated. Exposures in field municipal wastewater plants were conducted for 1 year in low and high chloride content units. The results show that lean duplexes S32101 and S32202 can be used as alternatives to S30403 and S31603 in low chloride electrolytes. At 500 ppm of chloride content, duplex stainless steel S32304 showed better corrosion resistance than S30403 and S31603. For higher chloride contents (1000 ppm and above) the standard duplexes S82441 and S32205 shall be preferred.     

Optical study of praseodymium dicarboxylate [Pr(H2O)]2[O2C(CH2)3CO2]3.4H2O

Praseodymium dicarboxylate, [Pr(H₂O)]₂[O₂C(CH₂)₃CO₂]₃.4H₂O]–glutarate, Pr[glut], is synthesized by hydrothermal techniques. The title compound crystallizes in the monoclinic space group C2/c (No. 15). The rare earth cation is coordinated by nine oxygen atoms, eight oxygen atoms from the carboxylate groups and one from the water molecule. The local symmetry of Pr site is low, C_s. The absorption spectra of Pr[glut] are recorded from the visible to the far IR domain at 300, 77 and 9 K. Under various Ar⁺ laser excitations no emission is detected from ³P₀ and ¹D₂ excited levels of Pr³⁺ ion. In the low temperature absorption spectra only one electronic line is recorded for ³H₄→³P₀ transition. It confirms a unique local environment for the rare earth ion in Pr[glut]. The utility of the ‘barycenter curves’ in the attribution of electronic lines is demonstrated. Energy level scheme of 36 Stark components is deduced from the absorption spectra. The parametric calculation was performed on the whole 4f² (Pr³⁺) configuration with the starting set of crystal field parameters obtained previously for the Eu³⁺ ion in the isostructural compound. Eight free ion and nine phenomenological crystal field parameters in C_2v symmetry reproduce quite well several electronic levels of Pr³⁺ ion experimentally observed in Pr[glut]. A good r.m.s. standard deviation of 14.8 cm⁻¹ is obtained.     

Latex coatings containing antifeedants: Formulation,characterization, and application for protection of conifer seedlings against pine weevil feeding

Latex-based coatings for protection of tree seedlings against pest insect feeding are evaluated with respect to surface-, mechanical-, and release properties and antifeedant activity. The latex dispersion Eudragit copolymer (EC) was used to form the coatings, 2,6-di-tert-butyl-4-methylphenol (BHT) and cis-dihydropinidine (Alk) as antifeedants, and a thickener and a alkylglucoside based nonionic surfactant were used as additives to optimize the release- and mechanical properties of coatings. Coating characterization was performed with respect to surface morphology (atomic force microscopy, AFM) and surface wetting (contact angle), as well as to mechanical (tensile stress- and tensile strain at break) properties. Surface smoothness and wettability as well as elasticity increased with addition of the surfactant. The optimized coatings were found to be elastic and water resistant at 3–6 wt.% of BHT and 3 wt.% of surfactant. BHT was released into SDS/water at very low rates. Several formulations of BHT and Alk were efficient in preventing the feeding on conifer bark by a pine insect, Hylobius abietis both in laboratory (no-choice) and in field (3 months) tests.