A New Generation of Magnetic Roll Separators Based on Rare-Earth Magnets for Concentration and Purification of Weakly Magnetic Materials

Magnetic roll separators on rare-earth magnets are suitable for removing iron impurities from various materials. The advantages of these magnetic separators over traditional ones are demonstrated. __________ Translated from Steklo i Keramika, No. 5, p. 33, May, 2005.     

Synthesis,characterization and properties of functionalized styrene–maleimide copolymers

New functionalized styrene–maleimide copolymers were prepared by free radical copolymerization of styrene (St) and N‐4‐carboxybutylmaleimide (NBMI) in chloroform, using 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monomer and copolymer characterization was carried out by ¹H‐ and ¹³C‐NMR. Copolymer composition was determined by elemental analysis and Fourier‐transform infrared (FTIR) spectroscopy. The glass transition temperature (from DSC) and the thermogravimetric analysis (TGA) of the copolymers were consistent with the thermal behavior and stability observed for alternating St–maleimide copolymers. St–NBMI copolymers crosslinked with divinylbenzene (DVB) were also synthesized and their cation exchange properties evaluated in order to assess the capacity of the new copolymers to bind metallic ions. Copyright © 2005 Society of Chemical Industry     

Effect of type of processing on the microstructural features and mechanical properties of Al-Cu/SiC metal matrix composites

In this study, an aluminum based metallic matrix (Al-2wt.% Cu) was reinforced with SiC particulates using a conventional casting technique and a new disintegrated melt deposition technique. Microstructural characterization studies conducted on the samples taken from disintegrated melt deposition technique revealed a more uniform distribution of SiC particulates and good interfacial integrity between SiC particulates and metallic matrix when compared to the conventionally cast composite samples. Results of ambient temperature mechanical tests demonstrate an increase in 0.2% YS and ultimate tensile strength of samples taken from disintegrated melt deposition technique when compared with the unreinforced and conventionally cast composite samples. The results of microstructural characterization and mechanical testing were finally rationalized in terms of the nature of processing technique employed to reinforce Al-2wt.% Cu metallic matrix with SiC particulates.     

Conservation laws and shock waves in the theory of relaxation heat transfer

A set of divergent forms of heat-transfer equations are presented. New laws are established that govern the behavior of the temperature field behind the front of a strong discontinuity. Comparison of theoretical and experimental data on the propagation of nonlinear waves in a sapphire crystal and liquid helium is carried out. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 2, pp. 318–325, March–April 1997.     

Parallel, self-organizing, hierarchical neural networks. II

For pt.I see IEEE Trans. Neural Networks, vol.1, p.167-78 (1990). Parallel, self-organizing, hierarchical neural networks (PSHNNs) involve a number of stages with error detection at the end of each stage, i.e., rejection of error-causing vectors, which are then fed into the next stage after a nonlinear transformation. The stages operate in parallel during testing. Statistical properties and the mechanisms of vector rejection of the PSHNN are discussed in comparison to the maximum likelihood method and the backpropagation network. The PSHNN is highly fault tolerant and robust against errors in the weight values due to the adjustment of the error detection bounds to compensate errors in the weight values. These properties are exploited to develop architectures for programmable implementations in which the programmable parts are reduced to on-off or bipolar switching operations for bulk computations and attenuators for pointwise operations     

Far-infrared pump-probe measurement of the lifetime of the 2p−1 shallow donor level in n-GaAs

The low temperature lifetime of electrons excited in the 2p^?1 donor level of n-GaAs has been studied in a far-infrared pump-probe experiment. The measurement has been carried out using a pulsed far-infrared molecular gas laser working at a wavelength of 292µm, with the sample in a magnetic field of 5.1 T, resonant with the 1s_o?2p^?1 transition. Two FIR pulses are sliced from one FIR-laser pulse by means of optical switching techniques using two Q-switched Nd:YAG lasers. The first pulse is used to saturate the transition, while the second pulse probes the return of the population in the excited state towards thermal equilibrium as a function of the time delay after the excitation pulse. The value of 350±50 ns found for the lifetime falls in line with CW saturation results on materials with other doping concentrations.     

Laminar flame theory. Part II

The laminar flame theory under the condition of minimum entropy production is presented. The equation of the temperature boundary layer is obtained for Le=0, and its general solution is found. It is shown that the mechanism of laminar flame propagation can be treated from the viewpoint of stationary thermal explosion in a cylindrical vessel of radius 2 as the critical regime in which the burnup is taken into account in an unusual form. Tomsk. Translated from Fizika Goreniya i Vzryva, Vol. 29, No. 5, pp. 22–30, September–October, 1993     

Evaluation of the quality of compacting water-saturated sands by sounding

Various methods of sounding were investigated for evaluating the quality of compacting water-saturated fine and medium sands. A comparative analysis of the data obtained with the data of direct soil sampling was carried out. The given recommendations can be used when preparing the new edition of the building codes for engineering surveys for construction. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 4, pp. 17–20, July–August, 1994