Three-Dimensional Cell Culture: A Breakthrough in Vivo

Cell culture is an important tool for biological research. Two-dimensional cell culture has been used for some time now, but growing cells in flat layers on plastic surfaces does not accurately model the in vivo state. As compared to the two-dimensional case, the three-dimensional (3D) cell culture allows biological cells to grow or interact with their surroundings in all three dimensions thanks to an artificial environment. Cells grown in a 3D model have proven to be more physiologically relevant and showed improvements in several studies of biological mechanisms like: cell number monitoring, viability, morphology, proliferation, differentiation, response to stimuli, migration and invasion of tumor cells into surrounding tissues, angiogenesis stimulation and immune system evasion, drug metabolism, gene expression and protein synthesis, general cell function and in vivo relevance. 3D culture models succeed thanks to technological advances, including materials science, cell biology and bioreactor design.     

Miniemulsion polymerization for synthesis of structured clay/polymer nanocomposites: Short review and recent advances

This review intends to present different aspects concerning clay/polymer nanocomposites produced by heterophase polymerization in aqueous media. This paper highlights the ability of miniemulsion polymerization to produce clay/polymer nanoparticles with tailored nanostructures. Indeed, this polymerization route enables the synthesis of composite nanoparticles with the clay platelets located either on the surface of the polymer particle or embedded inside the polymer particle. A focus is given on the influence of these nanostructures on the properties of the final material through a direct comparison of the composites obtained after water evaporation from these structured nanoparticles. Indeed, the film obtained from the film forming process of these nanoparticles present significantly different nanostructures and exhibit totally different mechanical behaviours and water uptakes. By comparing experimental results and modeling approaches, it is demonstrated that their properties are clearly related to the clay dispersion and contacts. It is also evidenced that the main drawback of miniemulsion from the coating application point of view, is the large water uptake promoted by the surfactant presence whose localization is strongly influenced by nanostructuration. This stresses the need for the further development of surfactant free miniemulsion polymerization using advantageously the clay presence to stabilize the emulsion.     

Dimer acid-based thermoplastic bio-polyamides: Reaction kinetics, properties and structure

New dimer acid-based-polyamides were synthesized with rapeseed oil-based dimer acid (DA) and 1,2-diaminoethane, 1,6-diaminohexane or 1,8-diaminooctane to form DAPAe, DAPAh and DAPAo, respectively. Effects of diamine chain lengths on kinetics evolution as well as on the thermal, physical and mechanical properties of the different polyamides synthesized were investigated. DAPAo was found to be the most reactive diamine because of its higher nucleophilic character. Differential scanning calorimetry (DSC) combined with X-ray diffraction revealed a low-order semi-crystalline structure for all polyamides. A tentative schema for the structural organization of these DAPA is proposed and shows a specific organization with local semi-crystalline segregation domains. DAPAe was found to possess the higher melting temperature likely due to higher crystal cohesion, which was confirmed by higher Young modulus in stress-strain experiments. Rheological data showed an increase of the glass transition temperature concomitantly with the increase of diamine chain length. They also revealed an increase of complex viscosity with the diamine chain length. Investigation of thermal stability showed that DAPAe degrades before DAPAh and DAPAo in connection with the number of methylene units per diamine.     

A surrogate model to assess the whole body SAR induced by multiple plane waves at 2.4?GHz

The assessment of the exposure to electromagnetic waves is nowadays a key question. Dealing with the relationship between exposure and incident field, most of previous investigations have been performed with a single plane wave. Realistic exposure in the far field can be modeled as multiple plane waves with random direction of arrival, random amplitude, and random phase. This paper, based on numerical investigations, studies the whole body specific absorption rate (SAR) linked to the exposure induced by five random plane waves having uniformly distributed angles of arrival in the horizontal plane, log-normal distributed amplitudes, and uniformly distributed phases. A first result shows that this random heterogeneous exposure generates maximal variations of ??25% for the whole body specific absorption. An important observation is that the exposure to a single plane wave arriving face to the body, used for the guidelines, does not constitute the worst case. We propose a surrogate model to assess the distribution of the whole body SAR in the case of an exposure to multiple plane waves. For a sample of 30 values of whole body SAR induced by five plane waves at 2.4?GHz, this simple approach, considering the resulting SAR as the sum of the SAR induced by each isolated plane wave, leads to an estimated distribution of whole body SAR following the real distribution with a p value of 76% according to the Kolmogorov statistical test.     

Bioactivity modulation of Bioglass® powder by thermal treatment

A discussion of the effects of Bioglass^® powder crystallisation on the in vitro bioactivity in simulated body fluid (SBF) is presented.Starting from Bioglass^® powder, different glass–ceramics were obtained by thermal treatments between 580 °C and 800 °C, with variable crystallisation content (from 10 to 92 wt%). All samples (glass and glass–ceramics) showed apatite formation at their surface when immersed in SBF. In case of the glass and the samples with lowest crystallinity, the first step of apatite formation involved a homogenous dissolution followed by an amorphous calcium phosphate (CaP) layer precipitation. For the samples with a high crystallisation content, heterogeneous dissolution occurred. For the first time, the Stevels number of the amorphous phase is used to explain the possible dissolution of the crystalline phase present in materials with a similar chemical composition of the Bioglass^®. All samples presented at 21 days of immersion in SBF B-type hydroxycarbonate apatite crystals.     

SYBR®Green qPCR screening methods for the presence of “35S promoter” and “NOS terminator” elements in food and feed products

The Cauliflower Mosaic Virus “35S promotor” (p35S) and the Agrobacterium “Nopaline Synthase” terminator (tNOS) are the most represented generic recombinant elements in commercial genetically modified crops to date. A set of four new SYBR^®Green qPCR methods targeting the “p35S” and “tNOS” core elements have been developed. These qPCR methods generate short amplicons of 147 and 75 bp for the “p35S” element and 172 and 69 bp for the “tNOS” element. Single target plasmids containing these amplicons were constructed and allow determining the nominal melting temperature (T _m value) of each amplicon. The four methods are specific for their respective targets, and moreover, three of them are highly sensitive (up to 1–2 copies detectable) at a PCR efficiency ranging between 95 and 100%. The latter methods can detect their respective targets at 0.1% (w/w) gDNA levels and are suitable for detecting low levels of genetically modified materials containing the “p35S” and/or “tNOS” elements.     

<Emphasis Type="Italic">K</Emphasis>-space data processing for magnetic resonance elastography (MRE)

Objective

Magnetic resonance elastography (MRE) requires substantial data processing based on phase image reconstruction, wave enhancement, and inverse problem solving. The objective of this study is to propose a new, fast MRE method based on MR raw data processing, particularly adapted to applications requiring fast MRE measurement or high elastogram update rate.

Materials and methods

The proposed method allows measuring tissue elasticity directly from raw data without prior phase image reconstruction and without phase unwrapping. Experimental feasibility is assessed both in a gelatin phantom and in the liver of a porcine model in vivo. Elastograms are reconstructed with the raw MRE method and compared to those obtained using conventional MRE. In a third experiment, changes in elasticity are monitored in real-time in a gelatin phantom during its solidification by using both conventional MRE and raw MRE.

Results

The raw MRE method shows promising results by providing similar elasticity values to the ones obtained with conventional MRE methods while decreasing the number of processing steps and circumventing the delicate step of phase unwrapping. Limitations of the proposed method are the influence of the magnitude on the elastogram and the requirement for a minimum number of phase offsets.

Conclusion

This study demonstrates the feasibility of directly reconstructing elastograms from raw data.

     

As-cast microstructures and behavior at high temperature of chromium-rich cobalt-based alloys containing hafnium carbides

Hafnium is often used to improve the high temperature oxidation resistance of superalloys but not to form carbides for strengthen them against creep. In this work hafnium was added in cobalt-based alloys for verifying that HfC can be obtained in cobalt-based alloys and for characterizing their behavior at a very temperature. Three Co–25Cr–0.25 and 0.50C alloys containing 3.7 and 7.4 Hf to promote HfC carbides, and four Co–25Cr– 0 to 1C alloys for comparison (all contents in wt.%), were cast and exposed at 1200 °C for 50 h in synthetic air. The HfC carbides formed instead chromium carbides during solidification, in eutectic with matrix and as dispersed compact particles. During the stage at 1200 °C the HfC carbides did not significantly evolve, even near the oxidation front despite oxidation early become very fast and generalized. At the same time the chromium carbides present in the Co–Cr–C alloys totally disappeared in the same conditions. Such HfC-alloys potentially bring efficient and sustainable mechanical strengthening at high temperature, but their hot oxidation resistance must be significantly improved.     

Physiological traits and meat quality of pigs as affected by genotype and housing system

The influence of pig housing system: alternative (bedding with outdoor area, BO) vs. conventional (slatted floor, SF) on growth performance, reactivity to pre-slaughter handling and meat quality was evaluated in two genotypes differing in the sire line, Duroc (CD) or synthetic (CS) with 40 pigs/genotype. Animal response to housing did not differ between genotypes. BO pigs had higher growth rate and feed intake, but similar carcass composition to SF pigs. Levels of stress related hormones and plasma metabolites at slaughter were not different between BO and SF pigs, suggesting that housing did not influence pig reactivity to pre-slaughter handling. Similar (Longissimus lumborum and Biceps femoris) or slightly reduced (Semimembranosus) pH values, higher drip, lipid content and juiciness were observed in BO compared with SF pork. CD pigs had more tender meat than CS. In conclusion, the BO system resulted in higher feed intake, faster growth rate, increased intramuscular fat, and improved eating quality in both genotypes.