Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

Effect of maleic acid content on the thermal stability, swelling behaviour and network structure of gelatin-based hydrogels prepared by gamma irradiation

The highly swelling Poly (acrylamide/maleic acid/gelatin) P(AAm/MA/G) hydrogels were prepared by gamma-irradiation at low dose rate (0.94 kGy/h) and moderate dose rate (3.84 kGy/h). The hydrogels were confirmed by FTIR. The effect of copolymer composition, dose and dose rate on the swelling behaviour was discussed. Increasing of MA content and G in the initial mixture leads to an increase in the amount of MA and G in the gel system and decrease in the gelation %. The swelling behaviours of the hydrogel prepared at moderate dose rate increased with increasing MA mole content in the gel system but, there is no systematic dependence of swelling on MA content was observed for the hydrogels obtained at low dose rate. Pore structure of the hydrogels was monitored by using scanning electron microscopy. Thermogravimetric analysis (TGA) and the rate of the thermal decomposition of P(AAm/MA/G) hydrogels has been evaluated to give a better understanding of the thermal stability of polymers, The X-ray data of P(AAm/MA/G) hydrogels was discussed to investigate some features namely the degree of ordering and crystallite size.     

Microgravity Modifies the Phenotype of Fibroblast and Promotes Remodeling of the Fibroblast–Keratinocyte Interaction in a 3D Co-Culture Model

Microgravity impairs tissue organization and critical pathways involved in the cell–microenvironment interplay, where fibroblasts have a critical role. We exposed dermal fibroblasts to simulated microgravity by means of a Random Positioning Machine (RPM), a device that reproduces conditions of weightlessness. Molecular and structural changes were analyzed and compared to control samples growing in a normal gravity field. Simulated microgravity impairs fibroblast conversion into myofibroblast and inhibits their migratory properties. Consequently, the normal interplay between fibroblasts and keratinocytes were remarkably altered in 3D co-culture experiments, giving rise to several ultra-structural abnormalities. Such phenotypic changes are associated with down-regulation of α-SMA that translocate in the nucleoplasm, altogether with the concomitant modification of the actin-vinculin apparatus. Noticeably, the stress associated with weightlessness induced oxidative damage, which seemed to concur with such modifications. These findings disclose new opportunities to establish antioxidant strategies that counteract the microgravity-induced disruptive effects on fibroblasts and tissue organization.     

Radio resource management for LTE-A relay-enhanced cells with spatial reuse and max–min fairness

One of the major issues in LTE-Advanced (LTE-A) systems is the poor capacity at the cell edge. This is mainly due to the interference experienced by the users as a result of the aggressive frequency reuse usually implemented. Relaying offers an attractive solution for this problem by offering better links than those with the eNodeB (eNB) for the terminals suffering from high path loss or high interference. However, adding relays complicates the resource allocation problem at the eNB and therefore the need for more efficient schemes arises. This is also aggravated by the reuse of resource blocks (RBs) by the relays to fully exploit the scarce spectrum, which, in turn, leads to intra-cell interference. In this paper, we study the joint power and resource allocation problem in LTE-A relay-enhanced cells that exploit spatial reuse. To guarantee fairness among users, a max–min fair optimization objective is used. This complex problem is solved using coordinate ascent and the difference of two convex functions (DC) programming techniques and the proposed scheme indeed converges to a local-optimum quickly. This is shown to be a satisfactory solution according to the simulation results that indicate an almost sevenfold increase in the 10th percentile capacity when compared to previously proposed solutions.     

Mechanically Fastened FRP-Strengthened Two-Way Concrete Slabs with and without Cutouts

The feasibility of strengthening concrete slabs in flexure, with and without cutouts, using the mechanically fastened (MF) FRP technique is investigated. Two series of large-scale reinforced concrete slabs are tested. The first series is comprised of five slabs without a cutout, and measuring 2,600×2,600×120?mm; the second series consists of four slabs of the same dimensions with a central cutout measuring 800×800?mm. The mechanically fastened system is found to be a valid alternative to the externally bonded system resulting in a rapid, economic, and effective strengthening technique for two-way concrete slabs. The increases in ultimate capacities of the MF FRP-strengthened slabs range between 30 and 70% over those of the unstrengthened specimens. In addition, finite-element modeling of MF FRP-strengthened slabs is introduced in this study. The interfacial behavior between the MF FRPs and the concrete substrate is accounted for by using appropriate interfacial models. Very good agreement is obtained between the test results and the numerical predictions.     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

Error evaluation on experimental stress–strain curve obtained from tube bulging test

To get precise material data for advanced numerical modelling of tube hydroforming process, the tube bulging test is recommended. Stresses and strains in the tube cannot be evaluated easily and several approaches have been proposed. A review is proposed and points out their advantages and drawbacks.     

Effectiveness of some diquaternary ammonium surfactants as corrosion inhibitors for carbon steel in 0.5 M HCl solution

Four Gemini surfactants were synthesized and characterized using elemental analysis, FTIR and ¹H NMR spectroscopy. The synthesized compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution. The inhibition efficiencies of the tested inhibitors were depended on the hydrophobic chain length and the used doses of the inhibitors. The polarization measurements showed that these inhibitors are acting as mixed inhibitors for both anodic and cathodic reactions. The results showed that the inhibition efficiencies were increased by increasing the inhibitor doses and the hydrophobic chain length and reached the maximum at 500 ppm by weight for stearyl derivative. The efficiencies obtained from the impedance measurements were in good agreement with those obtained from the gravimetrical and polarization techniques which prove the validity of these tolls in the measurements of the tested inhibitors.