A four-scale bidirectional reflectance model based on canopyarchitecture

Open boreal forests present a challenge in understanding remote sensing signals acquired with various solar and view geometries. Much research is needed to improve our ability to model the bidirectional reflectance distribution (BRD) for retrieving the surface information using measurements at a few angles. The geometric-optical bidirectional reflectance model presented in this paper considers four scales of canopy architecture: tree groups, tree crowns, branches and shoots. It differs from the Li-Strahler's model in the following respects: 1) the assumption of random spatial distribution of trees is replated by the Neyman distribution which is able to model the patchiness or clumpiness of a forest stand; 2) the multiple mutual shadowing effect between tree crowns is considered using a negative binomial and the Neyman distribution theory; 3) the effect of the sunlit background is modeled using a canopy gap size distribution function that affects the magnitude and width of the hotspot; 4) the branch architecture affecting the directional reflectance is simulated using a simple angular radiation penetration function; and 5) the tree crown surface is treated as a complex surface with microscale structures which themselves generate mutual shadows and a hotspot. All these scales of canopy architecture are shown to have effects on the directional distribution of the reflected radiance from conifer forests. The model results compare well with a data set from a boreal spruce forest     

Reflections on 19 cases of asbestosis discovered by chance in the population of an industrial region in the Basse-Sambre]

The authors describe 19 cases of definite or highly probable asbestosis which were observed among unselected out-patients at a hospital in the industrial area of the "Basse-Sambre". These cases were of various types and were, almost exclusively, of occupational origin. The variety and severity of the asbestosis in many of the cases justify a more thorough survey in this area. Those people who have handled and inhaled asbestos fibres at work will be examined in the first place. A radiological pulmonary survey will also be organized among the people living in the neighbourhood of factories using asbestos. Precise information about the origin, quality and characteristics of the inhaled dust as well as the intensity and duration of exposure will be obtained. Cases discovered in the survey will be investigated systematically by means of an extensive range of techniques: frontal and oblique X-rays with an appropriate kilovoltage for the detection of pleural calcifications and of the reticular thickening of the parenchyma; spirometry and measurement of the transfer factor for CO; arterial blood gases at rest and during exercise; search for ferruginous bodies in sputum; pathological studies of pulmonary and pleural tissues and of the ultrastructure of pleural tumours.     

High Definition Digital Fabrication of Active Organic Devices by Molecular Jet Printing

We introduce a high resolution molecular jet (MoJet) printing technique for vacuum deposition of evaporated thin films and apply it to fabrication of 30 μm pixelated (800 ppi) molecular organic light emitting devices (OLEDs) based on aluminum tris(8‐hydroxyquinoline) (Alq₃) and fabrication of narrow channel (15 μm) organic field effect transistors (OFETs) with pentacene channel and silver contacts. Patterned printing of both organic and metal films is demonstrated, with the operating properties of MoJet‐printed OLEDs and OFETs shown to be comparable to the performance of devices fabricated by conventional evaporative deposition through a metal stencil. We show that the MoJet printing technique is reconfigurable for digital fabrication of arbitrary patterns with multiple material sets and high print accuracy (of better than 5 μm), and scalable to fabrication on large area substrates. Analogous to the concept of “drop‐on‐demand” in Inkjet printing technology, MoJet printing is a “flux‐on‐demand” process and we show it capable of fabricating multi‐layer stacked film structures, as needed for engineered organic devices.     

Leaf area index mapping in northern Canada

Leaf area index (LAI) is an important structural vegetation parameter that is commonly derived from remotely sensed data. It has been used as a reliable indicator for vegetation's cover, status, health and productivity. In the past two decades, various Canada-wide LAI maps have been generated by the Canada Centre for Remote Sensing (CCRS). These products have been produced using a variety of very coarse satellite data such as those from SPOT VGT and NOAA AVHRR satellite data. However, in these LAI products, the mapping of the Canadian northern vegetation has not been performed with field LAI measurements due in large part to scarce in situ measurements over northern biomes. The coarse resolution maps have been extensively used in Canada, but finer resolution LAI maps are needed over the northern Canadian ecozones, in particular for studying caribou habitats and feeding grounds.

In this study, a new LAI algorithm was developed with particular emphasis over northern Canada using a much finer resolution of remotely sensed data and in situ measurements collected over a wide range of northern arctic vegetation. A statistical relationship was developed between the in situ LAI measurements collected over vegetation plots in northern Canada and their corresponding pixel spectral information from Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) data. Furthermore, all Landsat TM and ETM+ data have been pre-normalized to NOAA AVHRR and SPOT VGT data from the growing season of 2005 to reduce any seasonal or temporal variations. Various spectral vegetation indices developed from the Landsat TM and ETM?+?data were analysed in this study. The reduced simple ratio index (RSR) was found to be the most robust and an accurate estimator of LAI for northern arctic vegetation. An exponential relationship developed using the Theil–Sen regression technique showed an R ² of 0.51 between field LAI measurement and the RSR. The developed statistical relationship was applied to a pre-existing Landsat TM 250 m resolution mosaic for northern Canada to produce the final LAI map for northern Canada ecological zones. Furthermore, the 250 m resolution LAI estimates, per ecological zone, were almost generally lower than those of the CCRS Canada-wide VGT LAI maps for the same ecozones. Validation of the map with LAI field data from the 2008 season, not used in the derivation of the algorithm, shows strong agreement between the in situ LAI measurement values and the map-estimated LAI values.     

Properties of mixed chlorophyll a-glycolipid monolayers

Surface pressure, ellipsometric and surface potential-area isotherms have been measured to investigate the properties of chlorophyll a-digalactosyldiacyglycerol (Chl a-DGDG) and Chl a-sulfoquinovosyldiacylglycerol (SQDG) monolayers at the nitrogen-water interface. The surface pressure-area isotherms of Chla-DGDG exhibit a pronounced negative deviation with respect to ideality, whereas ellipsometric and surface potential isotherms of the mixed monolayers fall between those of the pure components. Hydrophilic interactions have been ruled out on the basis of the additivity law followed by the surface dipole moment of the mixed monolayers. The observed deviation exhibited by the π-A isotherms is interpreted in terms of an intermolecular cavity effect.     

Organotin levels in seafood and its implications for health risk in high-seafood consumers

Fish and fishery products are considered as the main source of organotin compounds (OTC). Unfortunately, little national contamination data is available to assess food exposure of organotins from French consumers. To provide a more accurate estimate of risks to human health, the butyltin, phenyltin and octyltin compounds sampling in four French coastal areas were measured in 159 composite samples (96 fresh and frozen fish, 28 mollusks, 14 crustaceans, 1 echinoderm, 11 canned foods, 4 smoked fish, 5 prepared seafood-based dishes) by capillary gas chromatography coupled with a microwave induced plasma atomic-emission spectrometer (CGC-MIP-AES). In these samples, butyltins were usually predominant and the range of the contamination levels was generally below those of earlier studies (fish: mean 5.6; min-max 1.1-23 microg/kg; fishery products: mean 6; min-max 0.8-14 microg/kg). Fish, especially tuna, salmon, mackerel, saithe/coalfish and cod were largely the main contributors (38%) to the total organotin exposure. With the supplementary contribution of great scallop, surimi, squid and oysters, the exposure exceeded 50% in all. However, the utmost OTC exposure was lesser than 47% of the provisional tolerable weekly intake [EFSA (European Food Safety Agency). Opinion of the Scientific Panel on Contaminants in the food chain on a request from the Commission to assess the health risks to consumers associated with exposure to organotins in foodstuffs. (Question N EFSA-Q-2003-110). The EFSA Journal, 102, 1-119, 2004. http://www.efsa.eu.int]. Nobody would exceed this limit. Finally, as this study has some limitations and since some other sources and health effects have not been clearly evaluated, it appears rational from public health and environmental viewpoints to continue to reduce the OTC levels in the environment.     

Modeling with blocks

This paper presents a simple and general modeling primitive, called a block, based on a generalized cuboid shape. Blocks are laid out and connected together to constitute the base shape of complex objects, from which is extracted a control mesh that can contain both smooth and sharp edges. The volumetric nature of the blocks allows for easy topology specification, as well as CSG operations between blocks. The surface parameterization inherited from the block faces provides support for texturing and displacement functions to apply surface details. A?variety of examples illustrate the generality of our blocks in both interactive and procedural modeling contexts.     

Acute lymphoblastic leukemia in children. Progress in life expectancy

Heuristic construction knowledge generated while contracting is seldom recorded and transferred to other workers. Experiences of past mistakes as well as efficient work practices are crucial means for saving money, time, and improving the safety and quality of construction. With the rising costs of construction and the increased demand of time constraints on contractor schedules, few members of the construction industry can afford to waste time and resources on errors or ineffective work practices. The Constructability Lessons Learned Database (CLLD) prototype described in this paper is a leading edge method of automatically gathering, systematically organizing and efficiently applying vital construction information to a contractor's daily activities. This paper presents a review of previous and current attempts at database constructability programs, uses of constructability feedback systems, challenges to develop and utilize such systems, and an overview of the design and development of the CLLD prototype. The overview describes knowledge elicitation techniques used to gather constructability knowledge, the design of the system (organizing and classifying construction information for efficient retrieval and expansion), and system's implementation, validation, and operation. The conclusion discusses future extensions of the CLLD concept in the construction industry.     

Influence of a core/shell rubber phase on the morphology and the impact resistance of a PC/SAN blend (75/25)

At 75/25 concentration ratio, bisphenol a polycarbonate (PC)/styreneacry-lonitrile copolymer (SAN) blend has poor impact resistance compared to PC/ABS. A rubber phase methacrylate-butadiene-styrene (MBS) of core/shell type was dispersed in PC/SAN blend. The morphology of the unmodified and modified blend was investigated. The influence of the acrylonitrile ratio in the SAN on the microstructure was studied. It clearly shows that core/shell resides at the interface between PC and SAN. It seems that core/shell particles enhance the adhesion between the different phases. Their presence influences the interface mobility; i.e., the coalescence of the dispersed phase observed in pure PC/SAN is considerably reduced when the MBS particles are added. The impact resistance of the samples was correlated with the morphology.