Laplace Plane Analysis of Transient Impedance Between Acupuncture Points Li-4 and Li-12

AC impedance between two acupuncture points (Li-4 and Li-12) and two pairs of anatomically similar points with the same separation was studied via Laplace plane analysis of the time domain current response to a predetermined voltage perturbation. The series resistance between the two acupuncture points was found to be significantly lower than between either pair of control points. The characteristic impedance of an equivalent transmission line was lower and the signal propagation velocity higher for the acupuncture point system as compared to both controls.     

Ventilation effects on air quality and on the yield and quality of ewe milk in winter

The effects of ventilation on air quality, and on the welfare and production performance of dairy ewes were assessed in a 6-wk trial conducted during the winter of 2002. Thirty-six midlactation Comisana ewes were divided into three groups of 12, which were randomly balanced for parity, time of lambing, and number of lambs suckled. Treatments were low (LOV), moderate (MOV), and programmed ventilation regimen (PROV). In LOV and MOV rooms, fans provided 10 ventilation cycles of 40 min each at a fan speed of 1 and 2 m/s, respectively. In the PROV room, the fan was programmed to maintain a 70% relative humidity. Mean ventilation rates were 23, 47, and 73 m3/h per ewe in LOV, MOV, and PROV rooms, respectively. Air concentrations of microorganisms and dust, and of gaseous pollutants were measured twice weekly. Cell-mediated immune response to phytohemagglutinin at d 1, 21 and 42, and humoral response to chicken egg albumin at d 11, 21, 30, and 40 were determined. At d 39, ewes were injected with 2 IU of porcine adreno-corticotropic-hormone/kg body weight(0.75), and subjected to blood sampling for evaluation of cortisol concentrations immediately before and 1, 2, and 4 h after adreno-corticotrophic-hormone injection. Milk yield was recorded daily. Individual milk samples were analyzed weekly for composition, renneting parameters, and somatic cell count. The LOV treatment resulted in higher air concentrations of NH3 and CO2 than the MOV and PROV treatments. Greater amounts of total and respirable dust were found in the PROV room than in the LOV and the MOV rooms. The LOV ewes had lower milk yield than the PROV ewes, lower milk casein content, and higher rate of clot formation than the MOV and PROV ewes. The ventilation regimen did not affect the immune and endocrine responses of the ewes. Results suggest that an intermittent ventilation regimen, providing a mean ventilation rate of 47 m3/h per ewe at a fan speed of 2 m/s, is required to sustain the yield and cheese-making ability of ewe milk during the winter season.     

A Real-Time Visual Inspection System for Railway Maintenance: Automatic Hexagonal-Headed Bolts Detection

Rail inspection is a very important task in railway maintenance, and it is periodically needed for preventing dangerous situations. Inspection is operated manually by trained human operator walking along the track searching for visual anomalies. This monitoring is unacceptable for slowness and lack of objectivity, as the results are related to the ability of the observer to recognize critical situations. The correspondence presents a patent-pending real-time Visual Inspection System for Railway (VISyR) maintenance, and describes how presence/absence of the fastening bolts that fix the rails to the sleepers is automatically detected. VISyR acquires images from a digital line-scan camera. Data are simultaneously preprocessed according to two discrete wavelet transforms, and then provided to two multilayer perceptron neural classifiers (MLPNCs). The "cross validation" of these MLPNCs avoids (practically-at-all) false positives, and reveals the presence/absence of the fastening bolts with an accuracy of 99.6% in detecting visible bolts and of 95% in detecting missing bolts. A field-programmable gate array-based architecture performs these tasks in 8.09 mus, allowing an on-the-fly analysis of a video sequence acquired at 200 km/h     

Retrieval of leaf area index in different vegetation types using high resolution satellite data

With the successful launch of the IKONOS satellite, very high geometric resolution imagery is within reach of civilian users. In the 1-m spatial resolution images acquired by the IKONOS satellite, details of buildings, individual trees, and vegetation structural variations are detectable. The visibility of such details opens up many new applications, which require the use of geometrical information contained in the images. This paper presents an application in which spectral and textural information is used for mapping the leaf area index (LAI) of different vegetation types. This study includes the estimation of LAI by different spectral vegetation indices (SVIs) combined with image textural information and geostatistical parameters derived from high resolution satellite data. It is shown that the relationships between spectral vegetation indices and biophysical parameters should be developed separately for each vegetation type, and that the combination of the texture indices and vegetation indices results in an improved fit of the regression equation for most vegetation types when compared with one derived from SVIs alone. High within-field spatial variability was found in LAI, suggesting that high resolution mapping of LAI may be relevant to the introduction of precision farming techniques in the agricultural management strategies of the investigated area.     

The application of dextran compared to other hydrocolloids as a novel food ingredient to compensate for low protein in biscuit and wholemeal wheat flour

Wheat is primarily used for bread-making. However, fungal diseases, grain moisture at harvest and low-protein contents strongly influence the quality of the wheat flour, thus creating challenges for traders, millers and commercial bakers who struggle to produce consistently high-quality products. This paper address the replacement of low-protein/wholemeal flour functionality for bread-making purposes. Three hydrocolloids, xanthan gum, dextran and hydroxypropyl methylcellulose, were incorporated into bread recipes based on high-protein flours, low-protein flours and coarse wholemeal flour. Hydrocolloid levels of 0–5 % (flour basis) were used in bread recipes to test the water absorption. The quality parameters of dough (farinograph, extensograph, rheofermentometre) and bread (specific volume, crumb structure and staling profile) were determined. Results showed that xanthan had negative impact on the dough and bread quality characteristics. HPMC and dextran generally improved dough and bread quality and showed dosage dependence. Volume of low-protein flour breads were significantly improved by incorporation of 0.5 % of the latter two hydrocolloids. However, dextran outperformed HPMC regarding initial bread hardness and staling shelf life regardless the flour applied in the formulation.     

7,8-Dihydro-8-oxoguanosine Lesions Inhibit the Theophylline Aptamer or Change Its Selectivity

Aptamers are attractive constructs due to their high affinity/selectivity towards a target. Here 7,8-dihydro-8-oxoguanosine (8-oxoG) has been used, due in part to its unique H-bonding capabilities (Watson–Crick or Hoogsteen), to expand the “RNA alphabet”. Its impact on the theophylline RNA aptamer was explored by modifying its binding pocket at positions G11, G25, or G26. Structural probing, with RNases A and T₁, showed that modification at G11 leads to a drastic structural change, whereas the G25-/G26-modified analogues exhibited cleavage patterns similar to that of the canonical construct. The recognition properties towards three xanthine derivatives were then explored through thermophoresis. Modifying the aptamer at position G11 led to binding inhibition. Modification at G25, however, changed the selectivity towards theobromine (K_d≈160 μm ), with a poor affinity for theophylline (K_d>1.5 mm ) being observed. Overall, 8-oxoG can have an impact on the structures of aptamers in a position-dependent manner, leading to altered target selectivity.     

Human herpesvirus-6 infection in liver transplant recipients: documentation of pathogenicity

In the posterior partially edentulous jaw, implants may be used to supplement existing natural dentition. Frequently, the maxillary sinuses and the mandibular nerve preclude the fabrication of freestanding implant-retained prostheses. However, if an implant and a natural abutment are combined, a fixed prosthesis can be fabricated, restoring the arch into the premolar area. The histories of three patients with attachments connecting implant-retained ceramotitanium crowns with crowns on natural abutments are described. A design for a rigid custom-made attachment for the Br?nemark system, using standard components with a machine-duplication, spark-erosion technique, is suggested.     

A nonlinear tracking control for sensorless induction motors

We propose a novel tracking control for induction motors in which only stator currents are used for feedback. Local exponential rotor speed and flux modulus tracking are achieved for any constant reference value and for restricted time-varying reference signals; any known motor parameters values (including constant load torque) and any initial condition, including rotor speed and fluxes, belonging to an explicitly computed domain of attraction are allowed.     

Adaptive control of linear time-varying systems

Single-input single-output uncertain linear time-varying systems are considered, which are affected by unknown bounded additive disturbances; the uncertain time-varying parameters are required to be smooth and bounded but are neither required to be sufficiently slow nor to have known bounds. The output, which is the only measured variable, is required to track a given smooth bounded reference trajectory. The undisturbed system is assumed to be minimum-phase and to have known and constant relative degree, known sign of the ‘high frequency gain’, known upper bound on the system order. An adaptive output feedback control algorithm is designed which assures: (i) boundedness of all closed-loop signals; (ii) arbitrarily improved transient performance of the tracking error; (iii) asymptotically vanishing tracking error when parameter time derivatives are L₁ signals and disturbances are L₂ signals.