In vitro release study of diltiazem hydrochloride from poly(vinyl pyrrolidone)/sodium alginate blend microspheres

Polymeric blend microspheres of poly(vinyl pyrrolidone) (PVP) with sodium alginate (NaAlg) were prepared by cross‐linking with calcium ions and used to deliver a calcium channel blocker drug, diltiazem hydrochloride (DT). The prepared microspheres were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature of the particles. Preparation conditions for the microspheres were optimized by considering the percentage entrapment efficiency, particle size, and swelling capacity. Effects of variables such as PVP/NaAlg ratio, molecular weight of PVP, cross‐linker concentration, and drug/polymer ratio on the release of DT were discussed at two different pH values (1.2, 6.8) at 37°C. It was observed that DT release from the microspheres decreased with increasing molecular weight of PVP and extent of cross‐linking. However, DT release increased with increasing PVP content and drug/polymer ratio (d/p) of the blend microspheres. The highest DT release percentage was obtained as 99% for PVP/NaAlg ratio of 1/2 with d/p ratio of 1/2 at the end of 4 h. It was also observed from release results that DT delivery from the microspheres through the external medium are much higher at low pH (1.2) value than that of high pH (6.8) value. The drug release from the microspheres mostly followed Fickian transport. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Heterogeneous catalytic degradation of cyanide using copper-impregnated pumice and hydrogen peroxide

The main objective of this research was to investigate the oxidative destruction of free cyanide with hydrogen peroxide and copper-impregnated pumice as a heterogeneous catalyst. Original or copper-impregnated pumices added alone were not effective adsorbents of negatively charged cyanide ions due to incompatible surface interactions. Peroxide and original pumices added together were also ineffective in removing cyanide. However, for all of the three natural pumices tested with various particle size fractions, the use of copper-impregnated pumices and peroxide together significantly enhanced both the initial rate and extent of cyanide removal. Although copper-impregnated specific surface area was the major factor affecting the rate and extent of cyanide destruction for a particular pumice source with similar surface chemistries, the type of surface chemistry (i.e., specific functional groups) within different pumice sources also appears to be a very important factor. Lower rates and extents of cyanide removals were observed at pH 11 compared to pH 8 probably because of the negative impacts of alkaline conditions in terms of scavenging peroxide and forming more negatively charged pumice surfaces. Both the initial rate and ultimate extent of cyanide removals were generally higher at a temperature of 20 degrees C compared with those found at 10 degrees C. The use of copper-impregnated pumice as a light, cheap, readily available, natural, and porous heterogeneous catalyst either in completely mixed/suspended or fixed-bed reactor configurations may be an effective treatment technology for cyanide removal from solution. This new approach may minimize downstream metal removal problems experienced in conventional cyanide oxidation technologies.     

The evaluation of procedures for dyeing silk with buckthorn and walloon oak on the basis of colour changes and fastness characteristics

In this study, silk fabric samples were dyed according to various procedures with buckthorn (Rhamnus petiolaris Boiss) and walloon oak (Quercus ithaburensis Decaisne) extracts. Reversed‐phase high‐performance liquid chromatography with diode‐array detection was utilised for the identification of dyes present in the dyed silk fabrics and the plant extracts. The extraction of dyes was carried out with a hydrochloric acid/methanol/water (2:1:1; v/v/v) mixture. The colour coordinates of the silk fabrics were measured, and the rubbing, wash and light fastness properties of the dyed silk materials were determined and are discussed.     

Cooking quality and sensorial properties of noodle supplemented with oat flour

Effects of oat flour addition (10, 20, 30, and 40%) on the quality characteristics of noodle were investigated. Noodles were evaluated in terms of cooking quality, color, chemical, and sensory properties. As oat flour level increased, protein, crude fat, ash, Mn, Fe, Zn, and Mg contents of noodles increased. Oat flour caused increases in cooking loss of noodles. Sensory and cooking characteristics of noodles were negatively effected when oat flour level was increased compared with the control. Noodle with 10% oat flour received the highest sensory scores in all noodle samples containing oat flour. Overall acceptability scores of control and in only the noodle with 10% oat flour were found statistically (p<0.05) similar. Especially, the usage of 10% oat flour in noodle formulation gave satisfactory results in terms of acceptability.     

Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials,Processes, and Properties

The ceramic top coat has a major influence on the performance of the thermal barrier coating systems (TBCs). Yttria-partially-stabilized zirconia (YSZ) is the top coat material frequently used, and the major deposition processes of the YSZ top coat are atmospheric plasma spraying and electron beam physical vapor deposition. Recently, also new thermal spray processes such as suspension plasma spraying or plasma spray-physical vapor deposition have been intensively investigated for TBC top coat deposition. These new processes and particularly the different coating microstructures that can be deposited with them will be reviewed in this article. Furthermore, the properties and the intrinsic–extrinsic degradation mechanisms of the YSZ will be discussed. Following the TBC deposition processes and standard YSZ material, alternative ceramic materials such as perovskites and hexaaluminates will be summarized, while properties of pyrochlores with regard to their crystal structure will be discussed more in detail. The merits of the pyrochlores such as good CMAS resistance as well as their weaknesses, e.g., low fracture toughness, processability issues, will be outlined.     

Porous Electrospun Fibers with Self‐Sealing Functionality: An Enabling Strategy for Trapping Biomacromolecules

Stimuli‐responsive porous polymer materials have promising biomedical application due to their ability to trap and release biomacromolecules. In this work, a class of highly porous electrospun fibers is designed using polylactide as the polymer matrix and poly(ethylene oxide) as a porogen. Carbon nanotubes (CNTs) with different concentrations are further impregnated onto the fibers to achieve self‐sealing functionality induced by photothermal conversion upon light irradiation. The fibers with 0.4 mg mL^?1 of CNTs exhibit the optimum encapsulation efficiency of model biomacromolecules such as dextran, bovine serum albumin, and nucleic acids, although their photothermal conversion ability is slightly lower than the fibers with 0.8 mg mL^?1 of CNTs. Interestingly, reversible reopening of the surface pores is accomplished with the degradation of PLA, affording a further possibility for sustained release of biomacromolecules after encapsulation. Effects of CNT loading on fiber morphology, structure, thermal/mechanical properties, degradation, and cell viability are also investigated. This novel class of porous electrospun fibers with self‐sealing capability has great potential to serve as an enabling strategy for trapping/release of biomacromolecules with promising applications in, for example, preventing inflammatory diseases by scavenging cytokines from interstitial body fluids.