Comparison on efficiency factors of F and C types of fly ashes

Fly ashes are obtained from thermal power plants and they are pozzolanic materials, which can act as partial replacement material for both portland cement and fine aggregate. With their economical advantages and potential for improving fresh and hardened concrete performance, they have some benefits for using in concrete industry. In this study, the objective was to find the efficiency factors of Turkish C and F-type fly ashes and to compare their properties. Three different cement dosages were used (260, 320, 400 kg/m³), two different ratios (10% and 17%) of cement reduced from the control concretes and three different ratios (depending on cement reduction ratio) of fly ash were added into the mixtures. At the ages of 28 and 90 days, compressive strength, modulus of elasticity and ultrasound velocity tests were carried out. From the compressive strength results, the k efficiency factors of C and F-type fly ashes were obtained. As a result, it is seen that efficiency factors of the concrete produced by the replacement of F and C type fly ashes with cement increase with the increase in cement dosage and concrete age.     

Zinc Oxide Nanowire Decorated Single‐Use Electrodes for Electrochemical DNA Detection

The surfaces of pencil graphite electrodes (PGEs) were decorated with zinc oxide nanowires (ZnO NWs) for the electrochemical detection of nucleic acids. ZnO NWs were synthesized through simple hydrothermal method. PGEs decorated with ZnO NWs (ZnO NW/PGEs) were electrochemically characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) following morphological characterization through transmission (TEM) and scanning electron microscopy (SEM). Enhanced sensor response obtained using ZnO NW/PGEs contrary to the bare PGE (control) samples. Our preliminary results simply reveal the potential of combining ZnO NWs with disposable sensor technology for the electrochemical detection of DNA.     

The interplay between leadership and organizational culture in the Turkish construction sector

Organizational culture and leadership are purported to be deeply integrated and intertwined within an organization. Although there is a substantial amount of research demonstrating the importance of the interplay of culture and leadership, there exist few empirical examinations of the nature of this link. To examine this link, based on Cameron and Quinn's Organizational Culture Assessment Instrument and Hofstede's Values Survey Module, a questionnaire survey was conducted. The sample consists of 499 managerial personnel out of 107 contracting firms. With the aim of achieving a better understanding of how leadership style is influenced by organizational culture, Multinomial Logistic Regression was used. The findings demonstrate that managers in the contracting companies with different cultural characteristics tend to adopt different leadership styles to lead their employees to succeed in their business. Information contained in this paper will feed into country-specific understanding of leadership and organizational culture within the construction industry.     

Changes in the texture,physicochemical properties and volatile compound profiles of fresh Kashar cheese (<90 days) during ripening

In this study, four different fresh Kashar cheese samples were ripened for 90 days. The physicochemical properties, texture attributes, fatty acid composition and volatile compound profiles of the samples were measured every 30 days of ripening. The texture properties of the cheese samples were significantly affected by the duration of the ripening period. The results of this study highlighted that texture parameters as a function of ripening period should be considered for both fresh and aged Kashar cheeses to determine the ripening period as they are very important for consumer acceptability and consumption of the end product.     

All Solution‐Based Fabrication of Copper Oxide Thin Film/Cobalt‐Doped Zinc Oxide Nanowire Heterojunctions

Versatile and intriguing solution‐based processes are utilized to synthesize nanostructured materials for device applications to reduce material production and device fabrication costs. This study presents results on the fabrication and characterization of copper oxide (CuO) coated cobalt‐doped zinc oxide nanowires (Co‐doped ZnO NWs)‐based heterojunction diodes prepared by a two‐step synthesis route through combined hydrothermal growth and sol–gel spin coating. Highly dense, well‐ordered, undoped, and Co‐doped ZnO NWs were successfully grown by hydrothermal method. Complementary CuO thin films were synthesized by sol–gel method and subsequently coated onto both undoped and Co‐doped ZnO NWs through spin‐coating technique. Enhanced diode properties with a rectification ratio of 10³ at ±2 V and an ideality factor of n = 2.4 (in dark) were obtained for Co‐doped ZnO NWs‐based heterojunction diodes. The obtained results demonstrated that the investigated heterojunction diode structure fabricated by facile and cost‐effective solution‐based processes can be a promising candidate for the next generation optoelectronic devices.     

Free radical crosslinking of unsaturated bacterial polyesters obtained from soybean oily acids

Summary Poly(-3-hydroxy alkanoate) containing unsaturated side chains, PHA-soybean, were produced by feeding Pseudomonas oleovorans with soybean oily acids obtained from soybean oil. Unsaturation of PHA-soybean were found to be 10 mol-% of unsaturated side chains. Main saturated part of the biopolymer was Poly(3-hydroxy octanoate) with minor hexanoate and decanoate units. PHA films were crosslinked via free radical mechanism by means of thermally or under UV irradiation in the presence of benzoyl peroxide, benzophenon, and /or ethylene glycol dimethacrylate (EGDM). Crosslinking yield of the PHA films were found to be from 81 to 93 wt.-% from the sol-gel analysis. Swelling properties of the crosslinked PHA films in chloroform and toluene were also studied. Mc values of crosslinked PHAs were also calculated using Flory-Rehner equation. The crosslinked biopolyester obtained by thermally at 60 °C with benzoyl peroxide indicated the highest crosslinking density. Glass transition temperatures (Tg) of crosslinked biopolyester samples were changed from −33 to −45 °C while that of PHA-soybean was −60 °C. Received: 16 June 2000/Revised version: 22 January 2001/Accepted: 20 May 2001     

Effective factors improving catalyst layers of PEM fuel cell

Cathode catalyst layer has an important role on water management across the membrane electrode assembly (MEA). Effect of Pt percentage in commercial catalyst and Pt loading from the viewpoint of activity and water management on performance was investigated. Physical and electrochemical characteristics of conventional and hydrophobic catalyst layers were compared. Performance results revealed that power density of conventional catalyst layers (CLs) increased from 0.28 to 0.64 W/cm² at 0.45 V with the increase in Pt amount in commercial catalyst from 20% to 70% Pt/C for H₂/Air feed. In the case of H₂/O₂ feed, power density of CLs increased from 0.64 to 1.29 W/cm² at 0.45 V for conventional catalyst layers prepared with Tanaka. Increasing Pt load from 0.4 to 1.2 mg/cm², improved kinetic activity at low current density region in both feeding conditions. Scattering electron microscopy (SEM) images revealed that thickness of the catalyst layers (CLs) increases by increasing Pt load. Electrochemical impedance spectroscopy (EIS) results revealed that thinner CLs have lower charge transfer resistance than thicker CLs. Inclusion of 30 wt % Polytetrafluoroethylene (PTFE) nanoparticles in catalyst ink enhanced cell performance for the electrodes manufactured with 20% Pt/C at higher current densities. However, in the case of 70% Pt/C, performance enhancement was not observed. Cyclic voltammetry (CV) results revealed that 20% Pt/C had higher (77 m²/g) electrochemical surface area (ESA) than 70% Pt/C (65 m²/g). In terms of hydrophobic powders, ESA of 30PTFE prepared with 70% Pt/C was higher than 30PTFE prepared with 20 %Pt/C. X-Ray Diffractometer (XRD) results showed that diameter of Pt particles of 20% Pt/C was 2.5 nm, whereas, it was 3.5 nm for 70% Pt/C, which confirms CV results. Nitrogen physisorption results revealed that primary pores of hydrophobic catalyst powder prepared with 70% Pt/C was almost filled (99%) with Nafion and PTFE.     

Modelling the impact of land-cover change on potential soil loss in the Taita Hills,Kenya, between 1987 and 2003 using remote-sensing and geospatial data

In sub-Saharan Africa, natural vegetation is being transformed into agricultural lands at a fast rate, endangering ecosystem services and increasing soil-loss potential, which may trigger land degradation. For the Taita Hills study area in Kenya, multi-temporal land-cover models of 1987, 1999 and 2003, derived from Satellite Pour l'Observation de la Terre (SPOT) imagery using a multi-scale segmentation/object relationship modelling (MSS/ORM) methodology and a rainfall layer, a digital elevation model (DEM) and a digital soil map were applied to model potential soil loss. Population growth in the area has led to a shortage of agricultural land and movement of people to the lowlands, evidenced by a 39% (9.3 km²) increase in croplands from 30% to 41% of the study area during the research time frame. Expansion took place mostly in surrounding foothills and lowlands, at the expense of natural shrubland and grassland, but also occurred in the hills. Universal soil-loss equation (USLE) model results showed a 60% (4 km²) increase in the area of very high potential soil loss, from 7% of the study area in 1987 to 12% in 2003, due mainly to very high soil-loss potential in croplands. Whilst the area of croplands as a whole increased, the relative proportion of very high soil-loss potential in croplands remained 20%, both in 1987 and in 2003, indicating that newly cleared agricultural lands with vulnerable soils are the most at-risk areas.