Packet Reservation Window Multiple Access for Microcellular Voice/Data Transmission

We propose a new packet reservation multiple access (PRMA) scheme for the joint transmission of voice and data traffics in a microcellular medium. The collision resolution protocol within the system is based on a modification of the window random access algorithm, which has superior properties compared to the conventional slotted Aloha. The proposed algorithm, which we call packet reservation window multiple access (PRWMA), works in distinct modes for voice and data without prioritization, and the user performs slightly different operations depending on the information type. Simulation results show that PRWMA outperforms PRMA by a significant margin in terms of voice user capacity.     

Quantitative atomic 3-D imaging of single/double sheet graphene structure

Graphene sheets can be regarded as base structure of many carbon nanostructures, and atomic arrangements and variations in the atomic structure have a drastic impact on their unique properties. Using a single/double layer graphene model structure, we present a strategy to “see” single carbon atoms in 3-D. In high-resolution transmission electron microscopy, exit-wave images are essential to obtain and to understand 3-D atomic structure. Using electrons at 80 kV not only minimizes the knock-on damage, but also improves the detection sensitivity due to the higher scattering power of carbon at lower acceleration voltage of the electron. Using experiments and image simulations, positions of individual carbon atoms in a single/double layer structure in graphene have been identified.     

Adaptive random access algorithm with improved delay performance

We propose an adaptive random access algorithm for mobile environments with capture. The algorithm has a dynamic window size which is updated according to the traffic intensity. The packet arrival rate is tracked by employing sequential detection procedures. Simulations indicate that reducing the window size adaptively under heavy load conditions improves the average delay significantly. Copyright © 2001 John Wiley & Sons, Ltd.     

Preparation and characterization of thermally conductive thermoplastic polyurethane/h‐BN nanocomposites

Polyurethane nanocomposites are versatile engineering polymers with unique properties. In this study, nano hexagonal boron nitride containing thermoplastic polyurethane elastomers were prepared via melt blending and hot‐pressing techniques. The nanocomposites were characterized using Fourier transform infrared, differential scanning calorimetry, thermal gravimetric analysis, tensile tests, and thermal conductivity measurements. The surface morphology of the TPU/h‐BN composites was characterized by scanning electron microscopy. The optical properties of the composites were determined by UV transmittance measurements and as the amount of h‐BN increased, optical transparencies decreased dramatically. Nanocomposites displayed higher E‐modulus values and lower elongation at break values than the pure TPU elastomer. Char yields of TPUs increased with increasing h‐BN percentage. Moreover, thermal conductivity of the composite materials improved with the incorporation of h‐BN. POLYM. COMPOS., 35:530–538, 2014. © 2013 Society of Plastics Engineers     

Far field radiation from an arbitrarily oriented Hertzian dipole in the presence of a layered anisotropic medium

Far field radiation from an arbitrarily oriented Hertzian dipole for two-layered uniaxially anisotropic medium with a tilted optic axis is treated analytically by using the dyadic Green's function of the problem when the dipole is placed over or embedded in a two-layered uniaxially anisotropic medium. The radiation fields are evaluated using the steepest descent method. Parameter studies including anisotropy, layer thickness and dipole location are performed to investigate the effects of changing different variables on the radiation fields. Results of this work can be applied in microstrip circuits and antennas.     

Large deformation of thermally bonded random fibrous networks: microstructural changes and damage

A mechanical behaviour of random fibrous networks is predominantly governed by their microstructure. This study examines the effect of microstructure on macroscopic deformation and failure behaviour of random fibrous networks and its practical implication for optimisation of its structure by using finite-element simulations. A subroutine-based parametric modelling approach—a tool to develop and characterise random fibrous networks—is also presented. Here, a thermally bonded polypropylene nonwoven fabric is used as a model system. Its microstructure is incorporated into the model by explicit introduction of fibres according to their orientation distribution in the fabric. The model accounts for main deformation and damage mechanisms experimentally observed and provides the meso- and macro-level responses of the fabric. The suggested microstructure-based approach identifies and quantifies the spread of stresses and strains in fibres of the network as well as its structural evolution during deformation and damage. Its simulations also predict a continuous shift in the distribution of stresses due to structural evolution and progressive failure of fibres.     

Influence of thermal annealing on microstructural,morphological, optical properties and surface electronic structure of copper oxide thin films

In this study, effect of the post-deposition thermal annealing on copper oxide thin films has been systemically investigated. The copper oxide thin films were chemically deposited on glass substrates by spin-coating. Samples were annealed in air at atmospheric pressure and at different temperatures ranging from 200 to 600°C. The microstructural, morphological, optical properties and surface electronic structure of the thin films have been studied by diagnostic techniques such as X-ray diffraction (XRD), Raman spectroscopy, ultraviolet–visible (UV–VIS) absorption spectroscopy, field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The thickness of the films was about 520 nm. Crystallinity and grain size was found to improve with annealing temperature. The optical bandgap of the samples was found to be in between 1.93 and 2.08 eV. Cupric oxide (CuO), cuprous oxide (Cu₂O) and copper hydroxide (Cu(OH)₂) phases were observed on the surface of as-deposited and 600 °C annealed thin films and relative concentrations of these three phases were found to depend on annealing temperature. A complete characterization reported herein allowed us to better understand the surface properties of copper oxide thin films which could then be used as active layers in optoelectronic devices such as solar cells and photodetectors.     

Effect of electroless etching parameters on the growth and reflection properties of silicon nanowires

Vertically aligned silicon nanowire (Si NW) arrays have been fabricated over large areas using an electroless etching (EE) method, which involves etching of silicon wafers in a silver nitrate and hydrofluoric acid based solution. A detailed parametric study determining the relationship between nanowire morphology and time, temperature, solution concentration and starting wafer characteristics (doping type, resistivity, crystallographic orientation) is presented. The as-fabricated Si NW arrays were analyzed by field emission scanning electron microscope (FE-SEM) and a linear dependency of nanowire length to both temperature and time was obtained and the change in the growth rate of Si NWs at increased etching durations was shown. Furthermore, the effects of EE parameters on the optical reflectivity of the Si NWs were investigated in this study. Reflectivity measurements show that the 42.8% reflectivity of the starting silicon wafer drops to 1.3%, recorded for 10 μm long Si NW arrays. The remarkable decrease in optical reflectivity indicates that Si NWs have a great potential to be utilized in radial or coaxial p-n heterojunction solar cells that could provide orthogonal photon absorption and enhanced carrier collection.     

Hydrogen storage capability of carbon nanotube Be@C120

PM3 (RHF) type semiempirical quantum chemical calculations have been carried out on (nH₂+Be)@C₁₂₀ systems where C₁₂₀ is a capped tube and n15. The results indicate that all these systems are stable but endothermic in nature. (7H₂+Be)@C₁₂₀ system has the lowest heat of formation value.     

Understanding the Catalytic Conversion of Automobile Exhaust Emissions Using Model Catalysts: CO + NO Reaction on Pd(111)

The CO + NO reaction is one of the profoundly important reactions that take place on Pd-based industrial three-way catalysts (TWC). In this review, we discuss results from polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) and conventional IRAS experiments on CO adsorption, NO adsorption and the CO + NO reaction on a Pd(111) model catalyst surface within a wide range of pressures (10^?6–450 Torr) and temperatures (80–650 K). It will be shown that these studies allow for a detailed understanding of the adsorption behavior of these species as well as the nature of the products that are formed during their reaction under realistic catalytic conditions. CO adsorption experiments on Pd(111) at elevated pressures reveal that CO overlayers exhibit similar adsorption structures as found for ultrahigh vacuum (UHV) conditions. On the other hand, in the case of the CO + NO reaction on Pd(111), the pressure dependent formation of isocyanate containing species' was observed. The importance of this observation and its effects on the improvement of the catalytic NO _x abatement is discussed. The kinetics of the CO + NO reaction on Pd(111) were also investigated and the factors affecting its selectivity are addressed.