Non-Stationary response of a vehicle obtained from a series of stationary responses

Ride characteristics of a vehicle moving on a rough ground with changing travel velocity are analyzed in this paper. The solution is difficult due to the non-stationary characteristics of the problem. Hence a new technique has been proposed to overcome this difficulty. This new technique is employed in the analysis of ride characteristics of a vehicle with changing velocity in the time/frequency domain. It is found that the proposed technique gives successful results in modelling non-stationary responses in terms of a series of stationary responses.     

Scale-up studies for stable,long-term indoor and outdoor production of hydrogen by immobilized Rhodobacter capsulatus

Photofermentative hydrogen production by immobilized Rhodobacter capsulatus YO3 was carried out in a novel photobioreactor in sequential batch mode under indoor and outdoor conditions. Long-term H₂ production was realized in a 1.4 L photobioreactor for 64 days using Rhodobacter capsulatus YO3 immobilized with 4% (w/v) agar on 5 mM sucrose and 4 mM glutamate. The highest hydrogen yield (19 mol H₂/mol sucrose) and hydrogen productivity (0.73 mmol H₂ L^?1 h^?1) were achieved indoors on 5 mM sucrose. The effect of initial sucrose concentration (5 mM, 10 mM, and 20 mM) on hydrogen production was also investigated. Sustained hydrogen production was carried out under natural, outdoor conditions as well. For the outdoor experiments, the highest hydrogen productivity and yield were obtained as 0.87 ± 0.06 mmol H₂ L^?1 h^?1 and 6.1 ± 0.2 mol H₂/mol sucrose, respectively on 10 mM sucrose. Furthermore, this system prevented sudden pH drops and fluctuations caused by the utilization of sucrose throughout the process. These results demonstrate that a proper immobilization setup can lead to long-term efficient and robust hydrogen production even under naturally varying conditions.     

Computational and experimental study of high-speed impact of metallic Taylor cylinders

High-speed impact of metallic Taylor cylinders is investigated computationally and experimentally. On the computational side, a modular explicit finite element hydrocode based on updated Lagrangian formulation is developed. A non-classical contour integration is employed to calculate the nodal forces in the constant strain axisymmetric triangular elements. Cell and nodal averaging of volumetric strain formulations are implemented on different mesh architectures to reduce the incompressibility constraints and eliminate volumetric locking. On the experimental side, a gas gun is designed and manufactured, and Taylor impact tests of cylinders made of several metallic materials are performed. Computational predictions of the deformed profiles of Taylor cylinders and experimentally determined deformed profiles are compared for verification purposes and to infer conclusions on the effect of yield strength, strain hardening and strain rate on the material response. The article also compares the performance of different plastic flow stress models that are incorporated into the hydrocode with the experimental results and results provided by previously reported simulations and tests.     

Use of consistency index, expert prioritization and direct numerical inputs for generic fuzzy-AHP modeling: A process model for shipping asset management

The aim of this paper is to develop a generic version of the conventional fuzzy-analytic hierarchy process (FAHP) method and investigate the shipping asset management (SAM) problem in the dry bulk shipping market. The recent literature has various applications of the FAHP, but these studies lack consistency control, use identical decision support rather than weighted expert choices, and lack measurable criteria. The proposed model, generic fuzzy-AHP (here after GF-AHP), provides a standard control of consistency on the decision matrix for the expert group. GF-AHP also improves the capabilities of the FAHP by executing direct numerical inputs without expert consultation. In practical business, some of the criteria can be easily calculated and expert consultation is a redundant process. Therefore, GF-AHP presents how to transform such numerical inputs to a priority scale. Finally, expertise differences on the decision group are reflected in the GF-AHP process by an expert weighting algorithm.     

Mechanical characterization of nickel nanowires by using a customized atomic force microscope

A new experimental method to characterize the mechanical properties of metallic nanowires is introduced. An accurate and fast mechanical characterization of nanowires requires simultaneous imaging and testing of the nanowires. However, existing mechanical characterization techniques fail to accomplish this goal due either to the lack of imaging capability of the mechanical test setup or the difficulty of individual alignment and manipulation of single nanowires for each test. In this study, nanowire specimens prepared by an electroplating technique are located on a silicon substrate with trenches. A customized atomic force microscope is located inside a scanning electron microscope (SEM) in order to establish the visibility of the nanowires, and the tip of the atomic force microscope cantilever is utilized to bend and break the nanowires. The ability to visualize the nanowires in an SEM improves the speed and accuracy of the tests. Experimentally obtained force versus bending displacement curves are fitted into existing analytical formulations to extract the mechanical properties. Experimental results reveal that nickel nanowires have significantly higher strengths than their bulk counterparts, although their elastic modulus values are comparable to bulk nickel modulus values.     

Use of information and communication technologies by small and medium‐sized enterprises (SMEs) in building construction

Scholars usually agree that small and medium‐sized enterprises (SMEs) active in construction are not very innovative when compared with large‐size construction enterprises. This is particularly evident in the case of adoption and diffusion of innovation associated with information and communication technologies (ICTs). Although ICTs are powerful instruments for the rapid and broader diffusion of technical knowledge, few SMEs are fully able to exploit their benefits. There is little evidence of how SMEs perceive ICTs and of the extent to which these technologies are actually used in the construction industry. There is a relationship between organizational size and the use of ICTs within the SMEs in the building construction sector in Turkey. A set of ICT variables comprising the perception, investment, usage and the software preferences of SMEs were analysed by making use of the data collected in a survey of a randomly selected sample of 227 building construction firms in Turkey. In contrast to the common approaches that consider SMEs as part of a homogeneous set of firms with similar characteristics, this study seeks the differences in ICT‐related attitudes between SMEs of different sizes. Rather than using arbitrarily pre‐defined intervals to classify firms by size, cluster analysis was used in this study. Although what emerges as a whole is the common under‐utilization of ICTs by SMEs in building construction, ‘organizational size’ appears to explain some of the ICT‐related attitude differences within these SMEs. Policy makers can consider using the findings of this study as inputs in their activities, as these findings represent a generic overview of the diffusion of new technologies and can assist in identifying future research directions.     

Meso-scale deformation and damage in thermally bonded nonwovens

Thermal bonding is the fastest and the cheapest technique for manufacturing nonwovens. Understanding mechanical behaviour of these materials, especially related to damage, can aid in design of products containing nonwoven parts. A finite element (FE) model incorporating mechanical properties related to damage such as maximum stress and strain at failure of fabric’s fibres would be a powerful design and optimisation tool. In this study, polypropylene-based thermally bonded nonwovens manufactured at optimal processing conditions were used as a model system. A damage behaviour of the nonwoven fabric is governed by its single-fibre properties, which are obtained by conducting tensile tests over a wide range of strain rates. The fibres for the tests were extracted from the nonwoven fabric in a way that a single bond point was attached at both ends of each fibre. Additionally, similar tests were performed on unprocessed fibres, which form the nonwoven. Those experiments not only provided insight into damage mechanisms of fibres in thermally bonded nonwovens but also demonstrated a significant drop in magnitudes of failure stress and respective strain in fibres due to the bonding process. A novel technique was introduced in this study to develop damage criteria based on the deformation and fracture behaviour of a single fibre in a thermally bonded nonwoven fabric. The damage behaviour of a fibrous network within the thermally bonded fabric was simulated with a FE model consisting of a number of fibres attached to two neighbouring bond points. Additionally, various arrangements of fibres’ orientation and material properties were implemented in the model to analyse the respective effects.     

Genetic algorithm with local search for the unrelated parallel machine scheduling problem with sequence-dependent set-up times

In this paper, a genetic algorithm (GA) with local search is proposed for the unrelated parallel machine scheduling problem with the objective of minimising the maximum completion time (makespan). We propose a simple chromosome structure consisting of random key numbers in a hybrid genetic-local search algorithm. Random key numbers are frequently used in GAs but create additional difficulties when hybrid factors are implemented in a local search. The best chromosome of each generation is improved using a local search during the algorithm, but the better job sequence (which might appear during the local search operation) must be adapted to the chromosome that will be used in each successive generation. Determining the genes (and the data in the genes) that would be exchanged is the challenge of using random numbers. We have developed an algorithm that satisfies the adaptation of local search results into the GAs with a minimum relocation operation of the genes’ random key numbers – this is the main contribution of the paper. A new hybrid approach is tested on a set of problems taken from the literature, and the computational results validate the effectiveness of the proposed algorithm.     

Enhanced Sulfur Tolerance of Ceria-Promoted NO x Storage Reduction (NSR) Catalysts: Sulfur Uptake, Thermal Regeneration and Reduction with H2(g)

SO _x uptake, thermal regeneration and the reduction of SO _x via H₂(g) over ceria-promoted NSR catalysts were investigated. Sulfur poisoning and desulfation pathways of the complex BaO/Pt/CeO₂/Al₂O₃ NSR system was investigated using a systematic approach where the functional sub-components such as Al₂O₃, CeO₂/Al₂O₃, BaO/Al₂O₃, BaO/CeO₂/Al₂O₃, and BaO/Pt/Al₂O₃ were studied in a comparative fashion. Incorporation of ceria significantly increases the S-uptake of Al₂O₃ and BaO/Al₂O₃ under both moderate and extreme S-poisoning conditions. Under moderate S-poisoning conditions, Pt sites seem to be the critical species for SO _x oxidation and SO _x storage, where BaO/Pt/Al₂O₃ and BaO/Pt/CeO₂/Al₂O₃ catalysts reveal a comparable extent of sulfation. After extreme S-poisoning due to the deactivation of most of the Pt sites, ceria domains are the main SO _x storage sites on the BaO/Pt/CeO₂/Al₂O₃ surface. Thus, under these conditions, BaO/Pt/CeO₂/Al₂O₃ surface stores more sulfur than that of BaO/Pt/Al₂O₃. BaO/Pt/CeO₂/Al₂O₃ reveals a significantly improved thermal regeneration behavior in vacuum with respect to the conventional BaO/Pt/Al₂O₃ catalyst. Ceria promotion remarkably enhances the SO _x reduction with H₂(g).