重馏分油加氢脱氮反应动力学模型的研究

简要地介绍了一些典型的模型氮化物的ＨＤＮ反应规律。根据胜利ＶＧＯ在３７２２Ｂ催化剂上的大量ＨＤＮ实验数据，提出了如下的ＨＤＮ基本反应动力学方程：ｄＣＮｄｔ＝－ｋ１＋Ｋ＊ＣＮＣＮＰＨ２为了扩大上式的应用范围，详细分析了各种因素（如原料油种类和馏程及Ｈ２Ｓ等）对ＨＤＮ的影响，并开发了相应的经验关联式，从而得到了一个较完整的馏分油ＨＤＮ反应动力学模型。验证实验表明，该模型是成功的。     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

井站安全培训之问题与对策

目前采气井站的安全教育培训工作取得了一定成绩,但也存在不少问题。针对这些问题,提出了3点对策建议:制定长期系统的安全培训计划;建立教育培训信息反馈机制;培训方法不断改进与创新。     

Complete mobile email management

Years have lapsed since the inauguration of the first Wireless Application Protocol (WAP) application. One of the main reasons for the lukewarm response so far may be attributed to the lack of a “Killer” application. Many companies and developers have attempted to replicate email services (an Internet Killer appplication) within the WAP realm, but till now, no significant success has been reported. This paper will first discuss on the key functions which are lacking in the present WAP-email service, and which are arguably necessary if a much larger user base is to be attracted to these services. A new system will be proposed which can enable the user to send files residing in a remote personal computer (PC) as attachments to his emails using WAP-enabled mobile devices. The implementation of the system will be presented in details. Issue relating to the connection to various types of email servers and the security of the system will also be addressed in the paper.     

An Investigation on Noisy Environments in Evolutionary Multiobjective Optimization

In addition to satisfying several competing objectives, many real-world applications are also characterized by a certain degree of noise, manifesting itself in the form of signal distortion or uncertain information. In this paper, extensive studies are carried out to examine the impact of noisy environments in evolutionary multiobjective optimization. Three noise-handling features are then proposed based upon the analysis of empirical results, including an experiential learning directed perturbation operator that adapts the magnitude and direction of variation according to past experiences for fast convergence, a gene adaptation selection strategy that helps the evolutionary search in escaping from local optima or premature convergence, and a possibilistic archiving model based on the concept of possibility and necessity measures to deal with problem of uncertainties. In addition, the performances of various multiobjective evolutionary algorithms in noisy environments, as well as the robustness and effectiveness of the proposed features are examined based upon five benchmark problems characterized by different difficulties in local optimality, nonuniformity, discontinuity, and nonconvexity     

The effect of OPWF filler on impact strength of glass-fiber reinforced epoxy composite

In the present study, oil palm wood flour (OPWF) particles with less than 250 μm sizes have been used as filler materials in the woven-glass-fiber reinforced epoxy composite. The hybrid composites were fabricated using a hand lay-up method and cured at room temperature under a compressive load of 196 N (20 kg). The OPWF of 2.5 to 10 parts per hundred (pph) by weight was used to evaluate its effect on impact strength of the hybrid composites at a range of temperature from −50 to 50 °C. The impact strength, evaluated using V-notch Charpy method, showed reduction with increasing filler content up to 5 pph and then the strength increment in those composites containing more than 5 pph OPWF. More severe damages were found in specimens with higher filler contents resulting higher energy absorption during impact. The composites with a large amount of OPWF particles deflected crack propagation paths or created obstacles at the crack tips and increased toughness of the composites. The impact strength was found to decrease when the samples fractured at subzero temperatures and this happened because of the reduction of the matrix ductility at lower temperatures.     

淄博广电总台7+1讯道数字分量转播车系统

本文以淄博广电总台7 1讯道数字分量转播车为例,浅谈该车的视频、音频系统以及设备配置情况.