Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

ZnO-based varistor samples were prepared by the direct mixing of the constituent phases (DMCP) and sintering at 1100 °C for 2 h. The influence of the starting powder mixture's composition – the amounts of the pre-reacted varistor compounds and their composition – and its preparation, either with or without mechano-chemical activation (MCA), on the microstructure, phase composition and electrical characteristics of the varistor samples was studied. It showed that MCA improved the density and microstructural homogeneity of the varistor samples. MCA strongly affected the grain growth: it enhanced the nucleation of inversion boundaries (IBs) in the ZnO grains and the IBs-induced grain-growth mechanism resulted in uniform grain growth and hence a microstructure with smaller ZnO grains and a narrower grain size distribution. The final phase composition of the samples prepared by the DMCP method mainly depended on the presence of varistor dopants that can prevent the formation of the pyrochlore phase, especially Cr₂O₃, while MCA can affect it mostly by providing a homogeneous distribution of those dopants. The DMCP varistor samples prepared with MCA had much better current–voltage characteristics than the samples of the same composition prepared from unactivated powders.     

Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

Recrystallization of phenylbutazone using supercritical fluid antisolvent process

Phenylbutazone was recrystallized from its solutions by using a supercritical fluid antisolvent process. It was dissolved in acetone and supercritical carbon dioxide was injected into the solution, thereby inducing supersaturation and particle formation. Variation in the physical properties of the recrystallized phenylbutazone was investigated as a function of the crystallizing temperature and the carbon dioxide injection rate. The recrystallized particles showed cleaner surfaces and more ordered morphology compared to the particles obtained by other methods such as solvent evaporation. X-ray diffraction patterns indicated that the crystallinity of the particles had been modified upon the recrystallization. Differential scanning calorimetry measurement revealed that the crystallizing temperature influenced the thermal stability of the resulting crystals. Larger crystals were produced when the carbon dioxide injection rate was reduced.     

An adaptive tracking problem for a family of retarded time-delay plants

Most of the existing switching control techniques are developed specifically for finite-dimensional linear time-invariant (LTI) systems. In many practical applications, however, it is essential to take time delay into consideration in the modelling as the control system can be highly sensitive to delay. In this paper, a multi-model switching control algorithm is proposed for retarded time-delay systems. It is assumed that the plant is represented by a family of known multi-input multi-output, observable, LTI models with multiple delays in the states, and that corresponding to each model in the known family, there exists a high-performance finite-dimensional LTI controller. In addition, it is supposed that a bound on the magnitude of the external inputs and disturbances is available. It is then shown that the proposed switching controller can stabilize the uncertain system, and that under some mild conditions, output tracking can be achieved in the given problem setting. Copyright © 2007 John Wiley & Sons, Ltd.     

Modeling alternative zoning strategies in forest management

To satisfy public demands for environmental values, forest companies are facing the prospect of a reduction in wood supply and increases in costs. Some Canadian provincial governments have proposed intensifying silviculture in special zones dedicated to timber production as the means for pushing out the forest possibility frontiers. In this paper, we compare the traditional two‐zone land allocation framework which includes ecological reserves and integrated forest management zones with the triad — a three‐zone scheme which adds a zone dedicated to intensive timber production. We compare the solutions of the mixed‐integer linear programs formulated under both land‐allocation frameworks. We explore through sensitivity analysis the conditions under which the triad regime can offset the impact on timber production from increased environmental demands. We show that under the realistic conditions characteristic to Coastal British Columbia, higher environmental demands may be satisfied under the triad regime without increasing the financial burdens on the industry or reducing its wood supply. This occurs, however, only if regulatory constraints in timber production zone are flexible.     

An evolutionary approach to automatic synthesis of high-performance analog integrated circuits

This paper presents an analog integrated circuit synthesis system based on an evolutionary approach. The system contains several novel features. One of these is the high-performance optimization algorithm, which is a combination of evolutionary strategies and simulated annealing. Modeling of dc parameters is done via a fast dc simulator developed for this purpose whereas modeling of ac parameters can be done either with user-defined equations or with neural-fuzzy performance models trained from SPICE simulations. Another novel feature of the system is the incorporation of matching properties of devices. This way, the optimized circuit becomes tolerant to process variations. The synthesis system has been tested on several independent examples and synthesized circuits have been verified functionally with SPICE simulations. Finally, a prototype chip composed of the three examples has been manufactured. The measurement results have demonstrated the validity of the synthesis system on silicon.     

Wear Resistance of Carbide and Boride Coatings on U8A Steel

Wear resistance measurements have been made with U8A steel bearing protective coatings based on the carbides of titanium, vanadium, and chromium or iron borides, for various forms of wear. The carbide and boride coatings raise the wear resistance considerably (by factors of 6-30 in accordance with the type of wear). Measurements have been made on the microhardness, microbrittleness, and adhesion of the coating to the substrate, which are effective characteristics that quite fully reflect the effects of the microhardness and state of stress, structure, and defectiveness on the wear resistance.     

Unsteady effects and heat-transfer when starting up power plant

The results of experimental study of unsteady effects on local heat transfer coefficients caused by abruptly increasing of the gas flow temperature in the inlet section of a cylindrical channel are presented.