Radiation and scattering from ferrite-tuned cavity-backed slotantennas: theory and experiment

A three-dimensional finite-element method hybridized with the spectral/spatial domain method of moments is presented for the analysis of ferrite-tuned cavity-backed slot antennas. The cavity, which is partially filled with magnetized ferrite layers, is flush mounted on an infinite ground plane with possible dielectric or magnetic overlay. The antenna operates primarily in the ultrahigh-frequency band. The finite-element method is used to solve for the electric-field distribution inside the cavity, whereas the spectral-domain approach is used to solve for the exterior region. An asymptotic extraction of the exponential behavior of the Green's function followed by a spatial evaluation of the resulting integral is used to improve computational speed. Radar cross section, input impedance, return loss, gain, and efficiency of ferrite-tuned cavity-backed slots (CBS) are calculated for various biasing conditions. Numerical results are compared with experimental data     

Linear crosstalk in 4×4 semiconductor optical amplifier gateswitch matrix

We report a comprehensive crosstalk investigation of a packaged InGaAsP/InP 4×4 semiconductor optical amplifier gate switch matrix, experimentally as well as theoretically. For a fully loaded switch with the same wavelength on all four inputs, all possible switching combinations are analyzed, thus yielding realistic crosstalk figures. Coherent and incoherent crosstalk phenomena are identified, and a switch crosstalk less than -40 dB has been measured     

A new erasing method for a single-voltage long-endurance flashmemory

A new method to erase a standard (double-poly, stacked-gate NOR-type) flash cell is proposed. The method, still using the tunneling mechanism to extract electrons from the floating gate, is based on the concept of keeping the electric field constant during the whole erasing operation. The new method has two main advantages with respect to the conventional one: (1) it does not depend on the supply voltage variation and (2) it allows a better reliability in terms of endurance-induced stress. Results have shown that flash device performances are greatly improved in terms of stability and endurance reliability up to one million cycles     

The development and application of a scale of acculturation

As Australia is one of the most multicultural societies in the world, acculturation of migrants and changes in migrants' health status should be an important focus of public health research. The absence of an accepted measure of acculturation is one barrier to exploring the relationship between acculturation and health. This paper presents data from a study of 851 Arabic-speaking adults attending 20 Arabic-speaking general practitioners in Canterbury, Sydney. An eight-item scale assessing acculturation was developed with a structural equation modelling program (LISREL). This acculturation scale was based on similar scales used with Hispanic populations, was theoretically grounded and had high internal consistency and criterion-related validity. To show the application of a scale of acculturation, patients' preferences for participation in medical decision making, according to level of acculturation, were examined. After adjustment for age, sex and highest level of formal education, significant inverse associations between acculturation and preferences for patient (versus family) involvement in medical decision making were found. Mechanisms for how acculturation affects health need to be explored.     

Formulating questions and locating primary studies for inclusion in systematic reviews

Much time and effort are spent on designing primary research studies. Similar care must be given to planning systematic reviews. The review should be based on an important, well-focused question that is relevant to patient care. By formulating the question properly, the criteria that primary studies must meet to be included in the review become clear. These criteria, which comprise the types of persons involved, exposure, control group, outcomes, and study designs of interest, can then be refined so that they are clinically relevant, sensible, and workable. Inclusion criteria that are too narrow will limit the amount of data in the review, thereby increasing the risk for chance results and making the review less useful for the reader. Reviews should include studies whose designs offer the least biased answer to the question being asked. To maximize available data and reduce the risk for bias, as many relevant studies as possible need to be identified, regardless of publication status or language. Multiple overlapping search strategies should therefore be used and must be carefully planned. Strategies include searching the many electronic databases available (after careful consideration of which terms to enter), manually searching journals and conference proceedings, searching bibliographies of articles, searching existing registers of studies, and contacting companies or researchers. The time taken to formulate the question adequately and develop appropriate searches will increase the chance of producing a high-quality, meaningful review.     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

A novel method for elimination of line-current harmonics insingle-stage PFC switching regulators

This paper studies a particular single-stage power-factor-correction (PFC) switching regulator employing a discontinuous-conduction-mode (DCM) boost-input cell and a continuous-current-mode (CCM) forward output cell. Although this single-stage PFC regulator can provide a reasonably high power factor when its PFC stage is operating in discontinuous mode, substantial reduction in line-current harmonics is possible by applying a suitable frequency-modulation scheme. This paper derives a frequency-modulation scheme and proposes a practical implementation using a simple translinear analog circuit. A quantitative analysis on the total harmonic distortion (THD) of the line current when the circuit is subject to a limited range of frequency variations is presented along with some considerations for practical design. Experimental data obtained from a prototype confirms the effectiveness of the proposed frequency-modulation scheme. The proposed analog translinear circuit allows custom integrated circuit implementation, making it a viable low-cost solution to the elimination of line-current harmonics in switching regulators