Surface and interfacial fourier transform infrared spectroscopic studies of latexes. XIV. Surface phase separation in polystyrene/poly-n-butyl acrylate latex films

This study focuses on the behavior of sodium dioctylsulfosuccinate (SDOSS) in 50/50 w/w % polystyrene/poly(butyl acrylate) (p-Sty/p-BA) latex films. Specifically, mobility and orientation are examined in the context of the film formation by the use of dynamic mechanical thermal analysis and attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy. While for the homopolymer blends of p-Sty and p-BA, two T_g values resulting from a phase separation of p-Sty and p-BA phases are observed, only a single T_g is detected for a copolymer of the same mixture, indicating a single phase within the film. ATR FTIR spectroscopic data indicate that the phase separation of p-Sty and p-BA blends does not occur uniformly across the film. After coalescence, p-Sty particles produce a significant degree of stratification at approximately 1.6 μm from the film surface. At this depth, the polystyrene rings assume preferentially parallel orientation to the film surface. At the same time, the hydrophilic groups of SDOSS surfactant (SO⁻₃Na⁺) are oriented preferentiallyparallel to the surface. Under high relative humidity conditions, water is able to diffuse into the film and swells the surface layers, thus causing them to expand. As a result, the top, predominately poly-n-BA surface becomes “thicker», and p-Sty phase appears to be near 2.3 μm from the surface. The polystyrene rings maintain their preferential parallel orientation to the surface, but the hydrophilic groups of SDOSS are able to diffuse into the film with the water uptake and are thus not present at the filmair interface. © 1996 John Wiley & Sons, Inc.     

A non-linear and distributed modelling procedure of fets

This paper describes a rigorous and systematic procedure to derive a non-linear distributed FET model that an easily be implemented in CAD routines of simulators based on harmonic balance techniques. The new model is derived from a knowldge of the conventional linear lumped equivalent circuit, from non-linear current sources extracted with pulsed measurements, and from the physical dimensions of the FET. For fundamental and haromonic requencies, the FET is modelled by N identical cells. Each cell is made up of a non-linear two-port section inserted between two linear four-port sections that simulate the coupling and the distributed effects along the electrodes of the FET in the width direction only. This non-linear distributed scaling approach to FET modelling has been applied to the analysis of a submicrometre-gate GaAs FET at Millimetre-wave frequencies, and the results were compared to the non-linear lumped element approach. This approach can be applied to other transistors used in non-linear regions at microwave and millimetre-wave frequencies.     

Site-Directed Immobilization of an Engineered Bone Morphogenetic Protein 2 (BMP2) Variant to Collagen-Based Microspheres Induces Bone Formation In Vivo

For the treatment of large bone defects, the commonly used technique of autologous bone grafting presents several drawbacks and limitations. With the discovery of the bone-inducing capabilities of bone morphogenetic protein 2 (BMP2), several delivery techniques were developed and translated to clinical applications. Implantation of scaffolds containing adsorbed BMP2 showed promising results. However, off-label use of this protein-scaffold combination caused severe complications due to an uncontrolled release of the growth factor, which has to be applied in supraphysiological doses in order to induce bone formation. Here, we propose an alternative strategy that focuses on the covalent immobilization of an engineered BMP2 variant to biocompatible scaffolds. The new BMP2 variant harbors an artificial amino acid with a specific functional group, allowing a site-directed covalent scaffold functionalization. The introduced artificial amino acid does not alter BMP2′s bioactivity in vitro. When applied in vivo, the covalently coupled BMP2 variant induces the formation of bone tissue characterized by a structurally different morphology compared to that induced by the same scaffold containing ab-/adsorbed wild-type BMP2. Our results clearly show that this innovative technique comprises translational potential for the development of novel osteoinductive materials, improving safety for patients and reducing costs.