Mixing and solid-liquid mass-transfer rates in a creusot-loire uddeholm vessel: A water model case study

The process of mixing and solid-liquid mass transfer in a one-fifth scale water model of a 100-ton Creusot-Loire Uddeholm (CLU) converter was investigated. The modified Froude number was used to relate gas flow rates between the model and its protoype. The influences of gas flow rate between 0.010 and 0.018 m³/s and bath height from 0.50 to 0.70 m on mixing time were examined. The results indicated that mixing time decreased with increasing gas flow rate and increased with increasing bath height. The mixing time results were evaluated in terms of specific energy input and the following correlation was proposed for estimating mixing times in the model CLU converter: T _mix=1.08Q ^−1.05 W ^0.35, where Q (m³/s) is the gas flow rate and W (tons) is the model bath weight. Solid-liquid mass-transfer rates from benzoic acid specimens immersed in the gas-agitated liquid phase were assessed by a weight loss measurement technique. The calculated mass-transfer coefficients were highest at the bath surface reaching a value of 6.40 × 10⁻⁵ m/s in the sprout region. Mass-transfer coefficients and turbulence parameters decreased with depth, reaching minimum values at the bottom of the vessel.     

The impact of team and work characteristics on team functioning

In this article, the authors seek to strengthen the theoretical foundation of team and cell formation through the inclusion of human factors. They distinguish three types of team characteristics: global, shared, and compositional attributes. In this last category, they also deal with diversity in teams by addressing three types of variables: demographic characteristics, skills and knowledge, and personality traits. In addition, the authors address the relevance of the structure of diversity in cells. For each of the above‐mentioned groups of team characteristics, their potential impact on team functioning is worked out and discussed with simultaneous consideration of the characteristics of the team task. Three industrial examples are included to illustrate the importance of including worker, team, and work characteristics when designing manufacturing cells. © 2006 Wiley Periodicals, Inc. Hum Factors Man 16: 1–15, 2006.     

Indoor temperature changes in retrofit homes

The behavioral response (e.g. changes in indoor temperatures, attention to window and door openings) to residential technical efficiency improvements (e.g. attic insulation, storm windows) is an important and largely unresolved issue. Although there is considerable discussion concerning the extent to which households take back some of the energy savings due to technical efficiency improvements in increased comfort, there is almost no empirical evidence on the subject.Detailed electricity billing data (from mid-1981 to mid-1983) were analyzed for 79 households that received financial assistance from the Bonneville Power Administration to retrofit their homes in mid-1982. The mean retrofit expenditure in these homes was $1900; the mean reduction in annual electricity use was 4700 kWh, of which 83% was due to reductions in space heating electricity use. Analysis of the electricity billing data suggests that these households increased their indoor temperature settings after retrofit by almost 1 °F on average. This temperature increase led to an estimated average loss of almost 600 kWh of electricity saving. In other words, roughly 10% of the energy saving due to retrofit was taken back in terms of increased comfort. These results concerning changes in indoor temperatures should be viewed cautiously because of limitations in the analytical method and the large variation across households.     

A comparison of commonly used hydrologic design methods for rainwater collectors

Rainwater collection as a possible water source in developing countries is introduced. The major parameters in calculating the size of the tank are defined. Six methods that have been used previously to relate demand, storage, reliability and the rainfall pattern are compared to the Ottawa Model over a wide range of demands.     

Hydrolysis of 4-methylumbelliferyl butyrate: A convenient and sensitive fluorescent assay for lipase activity

A rapid, sensitive and convenient fluorescent assay was developed to screen for lipase activity. The non-fluorescent substrate, 4-methylumbelliferyl butyrate (4-MUB), solubilized in either liposomal dispersions or bile salt/lecithin mixed micelles, is hydrolyzed to butyric acid and the highly fluorescent compound, 4-methylumbelliferone (4-MU). Assays are run at 37 C for 10 min, terminated, and the changes in fluorescence quantitated with a Turner III fluorometer. Both lingual and pancreatic lipases exhibit activity against this artificial substrate. The assay has several advantages: nmoles 4 MU/ml/hr are measured allowing the detection of very low lipolytic activity; multiple samples may be simultaneously assayed, and only a brief incubation period is required.     

Simplified characterization of uniaxial and biaxial nonlinearoptical crystals: a plea for standardization of nomenclature andconventions

Standards which eliminate ambiguity in reporting nonlinear phenomena, especially in the increasingly complex realm of biaxial crystals, are proposed. In order to restore uniformity to the designation of crystallographic axes and crystal tensor properties, adoption of IEEE/ANSI Std. 176, with a small but much needed modification for crystal class mm2, is recommended. For the reporting of nonlinear interaction characteristics, other frames are proposed which result in simpler rules than heretofore given for categorizing phase-matching loci, and for characterizing eigenmode polarizations, double refraction, effective nonlinear coupling, and first- and second-order acceptance bandwidths (angular, spectral, thermal) along these loci. Similarities as well as differences between biaxial and uniaxial crystals are emphasized     

The advancing-front mesh generation method revisited

This paper presents a mesh generation method of the advancing-front type which is designed in such a way that the well-known difficulties of the classical advancing-front method are not present. The retained solution consists of using the first steps of a Voronoï–Delaunay method to construct a background mesh which is then used to govern the algorithm. The two-dimensional case is considered in detail and possible extensions to adaption problems and three dimensions are indicated.     

The case of Gary: In search of post-hoc quixotic flexibility.

Responds to M. F. Hoyt's (see record 1995-22250-001) commentary on T. F. Van Denburg and E. J. Van Denburg's (see record 1994-18427-001) response to Hoyt's (see record 1994-18395-001) commentary on Van Denburg and Van Denburg's (see record 1993-06526-001) article about a case of premature therapy termination. Issues related to limits and flexibility in treatment are addressed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)