Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Silicon neuron: digital hardware implementation of the quartic model

This paper presents an FPGA implementation of the quartic neuron model. This approach uses digital computation to emulate individual neuron behavior. We implemented the neuron model using fixed-point arithmetic operation. The neuron model’s computations are performed in arithmetic pipelines. It was designed in VHDL language and simulated prior to mapping in the FPGA. We show that the proposed FPGA implementation of the quartic neuron model can emulate the electrophysiological activities in various types of cortical neurons and is capable of producing a variety of different behaviors, with diversity similar to that of neuronal cells. The neuron family of this digital neuron can be modified by appropriately adjusting the neuron model’s parameters.     

Immunoregulatory functions of paf-acether. VI. Dual effect on human B cell proliferation

The role of paf-acether (paf), a phospholipid cytokine, in the modulation of human B cell function was investigated. Paf, from 1×10⁻⁵ M to 10⁻⁶ M, decreased B cell proliferation induced by both phorbol myristate acetate (PMA) and anti-IgM antibodies (anti-IgM Ab). By contrast, 1×10⁻⁷ M to 1×10⁻⁹ M paf enhanced PMA triggered, but not anti-IgM triggered B cell proliferation. B cell proliferation was modulated between 24 and 72 hr of culture indicating that the effect of paf did not merely reflect a shift in proliferation kinetics. Interestingly, paf also enhanced the spontaneous proliferation of a Burkitt lymphoma-derived B cell line, Raji, which suggests that paf can directly act on B cells. The modulatory effect of paf on peripheral blood B cells was independent of PMA concentration, yet the effect on Raji cells was dependent upon cell density. The data suggest that paf is a potent modulator of B cell function, and may be involved in the control of humoral immune response. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Heavy-fuel flame radiation in gas turbine combustors—exploratory results

With lower costs and greater availability, heavy fuel oil appears as an attractive alternative to the conventional gas oil used in industrial gas turbines. However, higher levels of radiation and smoke are expected, and this note reports on some preliminary tests made with a combustion chamber burning fuels of different carbon content, ranging from kerosine to a 25% blend of residual fuel oil in gas oil, at a chamber pressure of 10 atm^*. The combustion rig was equipped with a total-radiation pyrometer and black-body furnace capable of measurement at different axial stations along the spray-stabilized flame. The presence of the residual fuel oil in the gas oil was found to promote significant increases in the mean levels of radiation, emissivity and smoke density, with a modest increase in liner temperature.     

An economic and sensitive method for extracting chromium speciation in airborne inhalable dust,using a green sample treatment coupled with electrothermal atomic absorption

ABSTRACT

A new approach of cloud point extraction CPE procedure is optimized for hexavalent chromium determination in airborne dusts. Triton X-114 is used as a surfactant and 1-(2-pyridylazo)-2-naphthol as a specific complexing agent for the trivalent chromium’s removal from the aqueous phase to isolate hexavalent chromium compounds. The parameters influencing the extraction protocol (pH, surfactant concentration, and temperature are optimized. The obtained detection and quantification limits are 0.1 and 0.4 μg/L, respectively. The linearity is verified, with a regression coefficient close to 0.999 and the extraction recovery exceeds 99%. The method was successfully applied to analyze airborne samples collected from workplaces.     

Microstructure and its relationship to deformation processes in amorphous polymer glasses

The microdeformation morphology of a number of vinyl polymers with bulky side chains (type I) and arylene polymers with flexible oxygen linkages (type II) was studied by electron microscopy. The polyarylenes crazed only near the glass transition while the polyvinyls exhibited a crazing regime that extended to liquid nitrogen temperatures. In addition significantly less plastic strain was localized in type II glass crazes relative to those in type I glasses. In compatible blends of polystyrene (PS) and 2,6-dimethyl poly(phenylene oxide) (2MPPO), ca. 30% 2MPPO was sufficient to induce a transition from type I to type II crazing behavior. Small amounts of PS suppressed the low-temperature 2MPPO β relaxation but enhanced the intermediate transition of 2MPPO at higher temperatures. Blending increased the conformational energy of the 2MPPO chain and improved interchain packing. The propensity for the polymer glass to form sharp shear bands at the expense of diffuse bands was increased by a decrease in the conformation energy of the polymer chain and an improvement in the glassy state packing.     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

Alcohol-induced changes of {beta}-lactoglobulin - retinol-binding stoichiometry

It has been demonstrated using CD that ethanol induces importantsecondary structure changes of ß-lactoglobulin. CDspectra indicate that ß-lactoglobulin secondary structure,which is mainly composed of ß-strands, becomes mostly-helical under the influence of the solvent polarity changes.The midpoint of ß-strand/-helix transition in ß-lactoglobulinis observed at dielectric constant {small tilde}60 (35% ethanol;v/v). According to CD measurements, the ethanol-dependent secondarystructure changes are reversible. The alkylation of lysines-NH₂ in ß-lactoglobulin weakens the central ß-barrelstructure, since the ß-strand/-helix transition midpointof alkylated ß-lactoglobulin is shifted to lower ethanolconcentration (25% ethanol; v/v). ß-Lactoglobulinstructural changes are triggering the dissociation of the ß-lactoglobulin- retinol complex as judged from complete quenching of its fluorescencein ethanol concentration >30% (v/v). However, in 20% ethanol(v/v), ß-lactoglobulin still retains most of its nativesecondary structure as shown by CD and, in this condition, oneß-lactoglobulin molecule binds an additional secondretinol molecule. This suggests that the highly populated speciesobserved around 20% ethanol (v/v) might represent an intermediatestate able to bind two molecules of retinol.     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Response to walnut olfactory and visual cues by the parasitic wasp Diachasmimorpha juglandis

Diachasmimorpha juglandis is a specialist parasitoid attacking fly larvae in the genus Rhagoletis that feed exclusively on walnut fruit husks. In a free-foraging assay comparing response to uninfested, infested, and mechanically damaged fruits, we first determined that D. juglandis use host feeding damage on the fruit as a cue for host presence. In another free-foraging assay that used artificial walnut models and wind tunnel experiments, D. juglandis distinguished infested from uninfested fruits by using either olfactory or visual cues separately. However, the response rate of wasps in the wind tunnel was raised considerably when visual cues were also available. We analyzed the volatile compounds emitted by cohorts of uninfested, mechanically damaged, and infested fruits 1, 3, 5, 8, and 10 days after oviposition by flies into the infested fruits. Total volatile emissions did not differ significantly among treatments, but quantitative changes in volatiles distinguished infested fruits from uninfested and damaged fruits. The fact that parasitoids did not distinguish between infested and damaged fruits in assays where damage was visible indicates that they rely on visual cues when those are available.