The effect of nanoclays on the nucleation,crystallization, and melting mechanisms of isotactic polypropylene

The influence of organomodified nanoclay (montmorillonite) on the crystallization and melting mechanisms of isotactic polypropylene (iPP) was studied. Films of both neat polymer and clay nanocomposites were prepared after molecular weight optimization through melt extrusion. Products exhibited the tactoidlike morphology since no compatibilizers were used. The effect of introduction of nanoclay within the polymer was studied through isothermal crystallization and linear heating. The results indicated that low nanoclay concentrations induce the formation of the β‐crystalline structure, its formation being inhibited with high nanoclay contents. Dynamic nonisothermal bulk crystallization experiments indicated that nanoclays act as nucleating agents of iPP. Isothermal, bulk crystallization studies indicated that the crystallization process (induction time and crystallization kinetics) is proportionally accelerated by the nanoclay presence. There was also an accelerated formation of secondary crystallization when nanoclays were present in high concentrations. POLYM. ENG. SCI., 47:1889–1897, 2007. © 2007 Society of Plastics Engineers     

Anionic polymerization of ethylene oxide with cryptates as counterions: 2

A kinetic study of the anionic polymerization of ethylene oxide has been made in tetrahydrofuran at 20°C, with the cryptate Cs⁺ + [TC] as counterion, [TC] being a spheroidal macrotricyclic ligand. Conductance measurements have been made on THF solutions of ?₄BCs + [TC]. Ionic associations higher than cryptated ion pairs are negligible for living end concentrations lower than 3 × 10^?4 moll^?1. k_± and the alkoxide ion pair dissociation constant K_D were determined from both sets of kinetic data obtained with and without added salt knowing the value of k_? from kinetic data performed with K⁺ + [222] as counterion. Free alkoxide ions are about twenty times more reactive than cryptated caesium ion pairs.     

Effect of special structure of clam shell powder on structure and properties of castor oil-based composites

Castor oil (CO) is an environmentally friendly renewable green resource and ideal alternative to petroleum resources. The preparation of high strength and high toughness castor oil-based polyurethane prepolymer (COPU) composites has significant applications such as supporting material and engineering plastic sheet. In this study, unmodified clam shell powder (CSP) with a unique CaCO₃-proteoglycan structure was used as a filler to prepare compatible reinforced COPU composite materials. Investigation of the mechanical properties revealed that the elastic modulus of the composite COPU reinforced with 50 wt% of CSP had increased to 5859.0 ± 8.4 MPa representing 187.77% to obtain stiffer and stronger material over pure COPU (2036.6 ± 196.9 MPa). Moreover, the scanning electron microscopy, thermogravimetric analysis and contact angle results demonstrated that the reinforced COPU composites have better compatibility, thermal stability, and water resistance than pure COPU. This work will promote the application prospects of CO-based polyurethane.     

Influence of the corrosion products of copper on its atmospheric corrosion kinetics in tropical climate

In the present paper, the identification of the corrosion product phases formed on copper under different atmospheres of Cuban tropical climate is reported. Cuprite (Cu₂O), paratacamite (Cu₂Cl(OH)₃), posnjakite (Cu₄SO₄(OH)₆ · 2H₂O) and brochantite (Cu₄SO₄(OH)₆) were the main phases identified by X-ray diffraction (XRD) analysis and Fourier transform infrared spectroscopy (FTIR).Copper corrosion products are known to have a protective effect against corrosion. However, a different behaviour was obtained under sheltered coastal conditions. This can be due to the corrosion products morphology and degree of crystallisation, rather than their phase composition. A higher time of wetness and the accumulation of pollutants not washed away from the metal surface can also play an important role.     

A limit set stabilization by means of the Port Hamiltonian system approach

A solution to the stabilization problem of a compact set by means of the Interconnection and Damping Assignment Passivity‐Based Control methodology, for an affine nonlinear system, was introduced. To this end, we expressed the closed‐loop system as a Port Hamiltonian system, having the property of almost all their trajectories asymptotically converge to a convenient limit set, except for a set of measure zero. It was carried out by solving a partial differential equation (PDE) or single matching condition, which allows the desired energy level or limit set E to be shaped explicitly. The control strategy was tested using the magnetic beam balance system and the pendulum actuated by a direct current motor (DC‐motor), having obtained satisfactory results. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of two authorization protocols using Colored Petri Nets

To prevent unauthorized access to protected trusted platform module (TPM) objects, authorization protocols, such as the object-specific authorization protocol (OSAP), have been introduced by the trusted computing group (TCG). By using OSAP, processes trying to gain access to the protected TPM objects need to prove their knowledge of relevant authorization data before access to the objects can be granted. Chen and Ryan’s 2009 analysis has demonstrated OSAP’s authentication vulnerability in sessions with shared authorization data. They also proposed the Session Key Authorization Protocol (SKAP) with fewer stages as an alternative to OSAP. Chen and Ryan’s analysis of SKAP using ProVerif proves the authentication property. The purpose of this paper was to examine the usefulness of Colored Petri Nets (CPN) and CPN Tools for security analysis. Using OSAP and SKAP as case studies, we construct intruder and authentication property models in CPN. CPN Tools is used to verify the authentication property using a Dolev–Yao-based model. Verification of the authentication property in both models using the state space tool produces results consistent with those of Chen and Ryan.     

Severity of delayed (“secondary”) cerebral energy failure after acute hypoxia-ischemia is related to the time integral of acute ATP depletion

The aim of this study was to reproduce the delayed (secondary) cerebral energy failure previously described in birth-asphyxiated newborn infants and to investigate relationships between primary insult severity and the extent of the delayed energy failure. Phosphorus (³¹P) magnetic resonance spectroscopy (MRS) at 7 T was used to study the brains of 12 newborn piglets during an acute, reversible, cerebral hypoxic-ischemic episode which continued until nucleotide triphosphates (NTP) were depleted. After reperfusion and reoxygenation, spectroscopy was continued for 48 h. High-energy metabolite concentrations returned to near normal levels after the insult, but later they fell as delayed energy failure developed. The time integral of NTP depletion in the primary insult correlated strongly with the minimum [phosphocreatine (PCr)]/[inorganic orthophosphate (P_i)] observed 24–48 h after the insult. (Linear regression analysis gave slope –8.04 h^–1; ordinate intercept=1.23;r=0.92;P<0.0001.) This model is currently being used to investigate the therapeutic potential of various cerebroprotective strategies including hypothermia.     

Fuzzy Adaptive Control Law for Trajectory Tracking Based on a Fuzzy Adaptive Neural PID Controller of a Multi-rotor Unmanned Aerial Vehicle

International Journal of Control, Automation and Systems - This article presents a fuzzy adaptive control law (FACL) designed for tracking the trajectory of a low-scale unmanned aerial vehicle...