Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Shape-Controlled Synthesis and Upconversion Luminescence of Y2O3:Yb, Er Microstructures

The Y2O3: Yb3 , Er3 microstructures were fabricated by a hydrothermal method without surfactants.The microstructures structure was characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM,KYKY 1000B).The up-conversion luminescence spectra were studied under 978 nm laser diode excitation.In Yb3 and Er3 codoped Y2 O3 microcrystals, the relative intensity of green emission became stronger as the morphology of sample changed from wires to films.     

Task versus relationship conflict, team performance, and team member satisfaction: A meta-analysis.

This study provides a meta-analysis of research on the associations between relationship conflict, task conflict, team performance, and team member satisfaction. Consistent with past theorizing, results revealed strong and negative correlations between relationship conflict, team performance, and team member satisfaction. In contrast to what has been suggested in both academic research and introductory textbooks, however, results also revealed strong and negative (instead of the predicted positive) correlations between task conflict, team performance, and team member satisfaction. As predicted, conflict had stronger negative relations with team performance in highly complex (decision making, project, mixed) than in less complex (production) tasks. Finally, task conflict was less negatively related to team performance when task conflict and relationship conflict were weakly, rather than strongly, correlated. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Influence of growth rate on the structural and morphological properties of TiN, ZrN and TiN/ZrN multilayers

The effect of the deposition rate on the structural and morphological properties of TiN and ZrN single layers and TiN/ZrN multilayers deposited by radiofrequency reactive magnetron sputtering has been studied. The total pressure was kept constant and the growth rate variation was obtained by small difference of nitrogen concentration in the fed gas. The decreasing deposition rate results in a structural change in the thin films from (111) orientation to (100) one. As consequence the surface morphology becomes smoother. Films roughness is strongly related with texture and it decreases with an increase in the (100) X-ray diffraction line intensity. In order to achieve a clear interpretation of our experimental results, the ratio between the N⁺ ions of the plasma and the atoms number reaching the substrate was considered. At high deposition rate with respect to the N⁺ concentration, the chemical potential of transition metal on (100) growth surface is higher than (111) one favouring the (111) orientation of the films. On the contrary, when the growth rate is low with respect to the nitrogen concentration, the chemical potential of transition metal on (111) growth surface is higher than the (100) one leading to a preferential growth in the (100) direction.     

Controlling the Critical Temperature in Mg1−x Al x B2

Here we report synthesis and characterization of high quality samples of the superconducting system Mg_1−x Al _x B₂, with a novel optimized preparation method, in a wide range of Al concentration. All the physical properties of the samples can be tuned continuously with increasing Al content. We have characterized the samples for their structural, morphological and magnetic properties with high resolution XRD, SEM-EDS and susceptibility measurements. We have prepared a large number of Al doped MgB₂ in the range 0<x<0.57. All the samples are bulk superconductors and the critical temperature show a smooth and regular behavior as a function of x. This work was supported by European project 517039 “Controlling Mesoscopic Phase Separation” (COMEPHS) (2005). An erratum to this article can be found at     

Systems that Should Have Failed: Critical Infrastructure Protection in an Institutionally Fragmented Environment

Recent years have witnessed major governmental initiatives regarding critical infrastructure protection (CIP). During that same time, critical infrastructures (CIs) have undergone massive institutional restructuring under the headings of privatization, deregulation and liberalization. Little research has gone into understanding the interactions between these two developments. In this article, we outline the consequences of institutional restructuring for the changing ways in which CIs ensure the reliability and security of their networks and services. Neither Normal Accident Theory nor High‐Reliability Theory can account for reliability under these conditions. We then investigate the implications of these findings for CIP.     

Premixed metal fibre burners based on a Pd catalyst

As an alternative to previously developed catalytic FeCrAlloy fibre mat burners based on perovskite catalysts, new catalytic burners have been developed based on Pd catalyst on lantana-stabilised Al₂O₃ and different fibre structures (NIT100A, NIT100S and NIT200S by ACOTECH NV). All development steps are considered, shifting from catalyst preparation (based on combustion synthesis of γ-Al₂O₃) to the optimisation of lantana and Pd loadings, from the definitions of the best catalyst-deposition conditions (washcoating) to the catalytic burners performances, determined in an ad hoc developed combustion chamber. The results show almost half pollutants emissions and better performance compared to various non-catalytic counterparts, especially as far as CO and NO_x emissions are concerned. Some flame instability problems were though registered, especially for one of the catalytic burner mattresses employed, at low specific power inputs and excesses of air (<375 kW/m² and <12%, respectively). Further, PdO/Pd transition is shown to influence the dynamic behaviour of the catalytic burners.     

框架结构焦仓的定向倒塌爆破

介绍了框架结构焦仓定向爆破拆除的设计与施工，着重介绍了爆破参烽的选取及安全防护措施。达到预期的爆破效果。