Structure,microstructure and electrical properties of Cu2+ doped (K,Na,Li)(Nb,Ta,Sb)O3 piezoelectric ceramics

This work studies the effects of copper doping on the properties of the (K_0.44Na_0.52Li_0.04)(Nb_0.86Ta_0.10Sb_0.04)O₃ piezoelectric ceramic material. Cu²⁺ incorporation into the perovskite structure produces a transformation of the crystalline lattice from tetragonal to orthorhombic symmetry together with an increase of the secondary phase. The grain size of the ceramic samples is increased due to the formation of a liquid phase during sintering, which increases with the Cu²⁺ content. EDS analysis reveals that the secondary-phase regions present a Cu and Nb-rich composition, indicating that the Cu-excess accommodates through the formation of this secondary phase. Cu-doping induces a rapid increase of the orthorhombic–tetragonal phase transition temperature, while the tetragonal–cubic phase transition temperature is decreased, the latter becoming more diffuse with the increase of Cu content. The piezoelectric properties of the material are reduced with the copper concentration, whereas the mechanical quality factor increases by a factor of nearly four.     

Maximum likelihood estimation for the three-parameter Weibull cdf of strength in presence of concurrent flaw populations

For a correct strength characterization of brittle materials, not only the maximum stress at fracture, but also the geometry of the specimens has to be considered thus taking into account the variable stress state and the size effect. Additionally, fracture may occur due to different fracture modes, as for example surface or edge defects. The authors propose a maximum likelihood estimator to obtain the cumulative distribution functions of strength for surface and edge flaw populations separately, both being three-parameter Weibull cdfs referred to an elemental surface area or elemental edge length, respectively. The method has been applied to simulated 3-point bending test data. The estimated Weibull parameters have been used to compute the cdfs of strength for specimens with different size, providing also the confidence bounds calculated by means of the bootstrap method. Finally, fracture data of 4-point bending tests on silicon carbide have been evaluated with the proposed method.     

Graphene for tough and electroconductive alumina ceramics

A simple, fast and upscalable method is described to produce graphene/alumina (G/Al₂O₃) composites by spark plasma sintering (SPS) with a significant improvement on both mechanical and electrical properties of monolithic Al₂O₃. Graphene oxide (GO) was mixed with Al₂O₃ using a colloidal method obtaining an excellent dispersion of GO in the alumina matrix. The material was consolidated by SPS that allowed, in one-step, the in situ reduction of the GO during the sintering process. A detailed Raman analysis was found to be very useful to study the orientation of the graphene in the composite and to evaluate and optimise its thermal reduction. Graphene platelets acted as elastic bridges avoiding crack propagation and providing this material with a crack bridging reinforcement mechanism. A very low graphene loading (0.22 wt%) led to a 50% improvement on the mechanical properties of the alumina and to an increase of the electrical conductivity up to eight orders of magnitude.     

Linear viscoelasticity characterization of egg albumen/glycerol blends with applications in material moulding processes

The effect of composition, storage conditions and temperature over the rheological properties of dough-like materials prepared within a mixing-rheometer was studied using different egg albumen protein/glycerol ratios: 50/50, 60/40 and 65/35. As protein/glycerol ratio increases from 50/50 to 65/35, the mechanical spectra display a dramatic increase (i.e. 15,000-fold in the storage modulus at 1 rad/s), as a greater degree of structuration is achieved. An evolution from a predominantly viscous behaviour into a predominantly elastic one is also observed (i.e. the loss tangent shifts from 1.9 to 0.3 at 1 rad/s).When the viscoelastic properties were studied along ageing, a relaxation related minimum was found at relatively short times, which could define the optimal condition for bioplastic processing (e.g. injection moulding). Freezing also plays an important role by inhibiting ageing and strongly retarding the evolution of G′ and G″ along ageing time after thawing. When samples are submitted to a thermal treatment up to 90 °C, a minimum is always found both in G′ and G″ that takes place at lower temperature as the protein/glycerol ratio increases (from 62 to 49 °C).     

Associations between apolipoprotein E genotype and circulating F<Subscript>2</Subscript>-isoprostane levels in humans

Apolipoprotein E (apoE), an important determinant of plasma lipoprotein metabolism, has three common alleles (ε2, ε3, and ε4). Population studies have shown that the risk of diseases characterized by oxidative damage, such as coronary heart disease and Alzheimer’s disease, is significantly higher in ɛ4 carriers. We evaluated the association between apoE genotypes and plasma F₂-isoprostane levels, an index of lipid peroxidation, in humans. Two hundred seventy-four healthy subjects (104 males, 170 females; 46.9±13.0 yr; 200 whites, 74 blacks; 81 nonsmokers, 64 passive smokers, and 129 active smokers) recruited for a randomized clinical antioxidant intervention trial were included in this analysis. ApoE genotype was determined by PCR and restriction enzyme digestion. Free plasma F₂-isoprostane was measured by GC-MS. Genotype groups were compared using multiple regression analysis with adjustment for sex, age, race, smoking status, body mass index, plasma ascorbic acid, and β-carotene. Subjects with ε3/ε4 and ε4/ε4 genotype (ε4-carriers) and with ε2/ε3 and ε3/ε3 (non-ε4-carriers) were pooled for analysis. In subjects with high cholesterol levels (total cholesterol above 200 mg/dl), plasma F₂-isoprostane levels were 29% higher in ε4 carriers than in non-ε4-carriers (P=0.0056). High-cholesterol subjects that are ε4 carriers have significantly higher levels of lipid peroxidation as assessed by circulating F₂-isoprostane levels.     

Synthesis of new extended surfactants containing a carboxylate or sulfate polar group

New extended anionic surfactants with a carboxylate or sulfate polar head were synthesized from polypropoxylated alcohols, and their structures were confirmed by ¹H and ¹³C nuclear magnetic resonance analysis. The extended surfactant critical micelle concentration was found to decrease with the length of the polypropylene glycol spacer. Surfactants containing a diethylene glycol link to the head group exhibited a higher critical micelle concentration than did their nondiethoxylated homologs.     

Alkaline Hydration Of C2S and C3S

This study analyzed the behavior of two laboratory‐synthesized calcium silicates, C₃S and C₂S, after hydration in 8‐M NaOH and in water as a control. Two‐ and 28‐d mechanical strength values were determined and the products were characterized with XRD, TEM, and ²⁹Si and ²³Na MAS NMR. The results showed that hydrating C₃S in a highly alkaline medium had no significant effect on the mechanical development of the material, whereas in C₂S hydration, that medium hastened hydration substantially, impacting setting and hardening times. This finding has technological implications, given the low early‐age reactivity of dicalcium silicate under normal hydration conditions.     

Synthetic Activity of Recombinant Whole Cell Biocatalysts Containing 2-Deoxy-D-ribose-5-phosphate Aldolase from Pectobacterium atrosepticum

In nature 2-deoxy-D-ribose-5-phosphate aldolase (DERA) catalyses the reversible formation of 2-deoxyribose 5-phosphate from D-glyceraldehyde 3-phosphate and acetaldehyde. In addition, this enzyme can use acetaldehyde as the sole substrate, resulting in a tandem aldol reaction, yielding 2,4,6-trideoxy-D-erythro-hexapyranose, which spontaneously cyclizes. This reaction is very useful for the synthesis of the side chain of statin-type drugs used to decrease cholesterol levels in blood. One of the main challenges in the use of DERA in industrial processes, where high substrate loads are needed to achieve the desired productivity, is its inactivation by high acetaldehyde concentration. In this work, the utility of different variants of Pectobacterium atrosepticum DERA (PaDERA) as whole cell biocatalysts to synthesize 2-deoxyribose 5-phosphate and 2,4,6-trideoxy-D-erythro-hexapyranose was analysed. Under optimized conditions, E. coli BL21 (PaDERA C-His AA C49M) whole cells yields 99 % of both products. Furthermore, this enzyme is able to tolerate 500 mM acetaldehyde in a whole-cell experiment which makes it suitable for industrial applications.     

Hysteresis loops of individual Co nanostripes measured by magnetic force microscopy

High-resolution magnetic imaging is of utmost importance to understand magnetism at the nanoscale. In the present work, we use a magnetic force microscope (MFM) operating under in-plane magnetic field in order to observe with high accuracy the domain configuration changes in Co nanowires as a function of the externally applied magnetic field. The main result is the quantitative evaluation of the coercive field of the individual nanostructures. Such characterization is performed by using an MFM-based technique in which a map of the magnetic signal is obtained as a function of both the lateral displacement and the magnetic field.