Unsteady fluid mechanics and heat transfer study in a double-tube air–combustor heat exchanger with porous medium

Fluid mechanics and heat transfer are studied in a double-tube heat exchanger that uses the combustion gases from natural gas in a porous medium located in a cylindrical tube to warm up air that flows through a cylindrical annular space. The mathematical model is constructed based on the equations of continuity, linear momentum, energy and chemical species. Unsteady fluid mechanics and heat transfer by forced gas convection in the porous media, with combustion in the inner tube, coupled to the forced convection of air in the annular cylindrical space are predicted by use of finite volumes method. Numerical simulations are made for four values of the annular air flow Reynolds number in the range 100 ? Re ? 2000, keeping constant the excess air ψ = 4.88, the porosity ε = 0.4, and the air–fuel mixture inlet speed Uo = 0.43 m/s. The results obtained allow the characterization of the velocity and temperature distributions in the inner tube and in the annular space, and at the same time to describe the displacement of the moving combustion zone and the annular porous media heat exchanger thermal efficiency. It is concluded that the temperature increase is directly related to the outer Reynolds number.     

Large-eddy simulation of turbulent heat convection in a spanwise rotating channel flow

In this paper, we investigate the effects of the Coriolis force in a heated plane channel flow subjected to spanwise rotation using the method of large-eddy simulation. We present both the general and simplified transport equations for the resolved turbulent stresses, which are essential for understanding the unique pattern of turbulent kinetic energy production in a rotating system. Numerical simulations are performed using primarily two dynamic subgrid-scale stress models and one dynamic subgrid-scale heat flux model; namely, the conventional dynamic model (DM) and a novel dynamic nonlinear model (DNM) for closure of the filtered momentum equation, and an advanced dynamic full linear tensor thermal diffusivity model (DFLTDM) for closure of the filtered thermal energy equation. The turbulent flow field studied herein is characterized by a Reynolds number Re_τ = 150 and various rotation numbers Ro_τ ranging from 0 to 7.5. In order to validate the LES approach, turbulent statistics obtained from the simulations are thoroughly compared with the available experimental results and direct numerical simulation (DNS) data. A detailed comparative study has been conducted in order to evaluate the performance of the DM and DNM in terms of their prediction of characteristic features of the velocity and temperature fields and their capability of reflecting both forward and backward scatter of kinetic energy between the filtered and subgrid scales.     

Chicory juice clarification by membrane filtration using rotating disk module

Clarification is the first step of inulin production from chicory juice, and membrane filtration as an alternative can greatly simplify this process, increase juice yield, improve product quality, and reduce the cost and waste volume. In this study, a rotating disk module (RDM) was used to investigate the clarification of chicory juice by four micro- and ultrafiltration membranes. Compared with dead end filtration, the RDM had a much higher permeate flux and product quality. High rotating speeds produced high permeate fluxes and reduced flux decline, because of the strong back transport of foulant from fouling layer to feed solution. At high rotating speeds of 1500–2000 rpm, the permeate flux increased with membrane pore size and transmembrane pressure (TMP), while at low rotating speeds (<1000 rpm), permeate flux was independent of membrane type and TMP due to a thick deposited fouling layer as a dominant filtration resistance, while carbohydrate transmission decreased at higher TMP because of denser cake layer as an additional selective membrane. The highest carbohydrate transmission (∼98%) and desirable permeate turbidity (2.4 NTU) was obtained at a TMP of 75 kPa and a rotating speed of 2000 rpm for FSM0.45PP membrane. With the RDM, the Volume Reduction Ratio (VRR) could reach 10 with a high permeate flux (106 L m⁻² h⁻¹) in the concentration test, and permeate was still rich in carbohydrate and well clarified. Chemical cleaning with 0.5% P3-ultrasil 10 detergent solution was able to recover 90% water flux of fouled membrane.     

Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

Infiniband电缆组件测量夹具S参数的一致性测试

S参数测量,如插入损耗、回波损耗和频域串扰正日益成为高速数字标准电缆组件一致性测试程序的一部分。例如,当前Infiniband规范要求,电缆差分插入损耗在1.25Ghz时,小于10dB。PCIExpress和串行ATAII及X A U I等其它标准也都有类似的测量要求。传统S参数测量一直使用频域矢量网络     

Spatial variability of fine particle mass, components, and source contributions during the regional air pollution study in St. Louis

Community time-series epidemiology typically uses either 24-hour integrated particulate matter (PM) concentrations averaged across several monitors in a city or data obtained at a central monitoring site to relate PM concentrations to human health effects. If the day-to-day variations in 24-hour integrated concentrations differ substantially across an urban area (i.e., daily measurements at monitors at different locations are not highly correlated), then there is a significant potential for exposure misclassification in community time-series epidemiology. If the annual average concentration differs across an urban area, then there is a potential for exposure misclassification in epidemiologic studies that use annual averages (or multi-year averages) as an index of exposure across different cities. The spatial variability in PM2.5 (particulate matter < or = 2.5 microm in aerodynamic diameter), its elemental components, and the contributions from each source category at 10 monitoring sites in St. Louis, Missouri were characterized using the ambient PM2.5 compositional data set of the Regional Air Pollution Study (RAPS) based on the Regional Air Monitoring System (RAMS) conducted between 1975 and 1977. Positive matrix factorization (PMF) was applied to each ambient PM2.5 compositional data set to estimate the contributions from the source categories. The spatial distributions of components and source contributions to PM2.5 at the 10 sites were characterized using Pearson correlation coefficients and coefficients of divergence. Sulfur and PM2.5 are highly correlated elements between all of the site pairs Although the secondary sulfate is the most highly correlated and shows the smallest spatial variability, there is a factor of 1.7 difference in secondary sulfate contributions between the highest and lowest site on average. Motor vehicles represent the next most highly correlated source component. However, there is a factor of 3.6 difference in motor vehicle contributions between the highest and lowest sites. The contributions from point source categories are much more variable. For example, the contributions from incinerators show a difference of a factor of 12.5 between the sites with the lowest and highest contributions. This study demonstrates that the spatial distributions of elemental components of PM2.5 and contributions from source categories can be highly heterogeneous within a given airshed and thus, there is the potential for exposure misclassification when a limited number of ambient PM monitors are used to represent population-average ambient exposures.     

Activity–Composition Relations of Chromium Oxide in Silicate Melts at 1500°C under Strongly Reducing Conditions

The solubility and activity–composition relations of chromium oxide in melts of the systems CaO–CrO _x –SiO₂ and CaO–Al₂O₃–CrO _x –SiO₂ have been determined at 1500°C by equilibrating melts with Pt–Cr alloys at known oxygen pressures. It is shown that the increase in the concentration of divalent chromium ions, as the oxygen pressure and the basicity of melt decrease, results in a dramatic increase in the solubility of chromium oxide in the liquid phase. An increase in the Al₂O₃ content of the melt leads to a decrease in the solubility of chromium oxide over the whole composition range studied. The activity coefficient of CrO has been found to increase with increasing melt basicity and decreasing oxygen pressure whereas the activity coefficient of CrO_1.5 decreases sharply with increasing melt basicity for siliceous melts but levels off at a basicity ratio (wt% CaO/wt% SiO₂) of about 0.7. An increase in the Al₂O₃ content of the melts results in an increase in the activity coefficient of CrO.     

Heteroalleles in Common Wheat: Multiple Differences between Allelic Variants of the Gli-B1 Locus

The Gli-B1-encoded γ-gliadins and non-coding γ-gliadin DNA sequences for 15 different alleles of common wheat have been compared using seven tests: electrophoretic mobility (EM) and molecular weight (MW) of the encoded major γ-gliadin, restriction fragment length polymorphism patterns (RFLPs) (three different markers), Gli-B1-γ-gliadin-pseudogene known SNP markers (Single nucleotide polymorphisms) and sequencing the pseudogene GAG56B. It was discovered that encoded γ-gliadins, with contrasting EM, had similar MWs. However, seven allelic variants (designated from I to VII) differed among them in the other six tests: I (alleles Gli-B1i, k, m, o), II (Gli-B1n, q, s), III (Gli-B1b), IV (Gli-B1e, f, g), V (Gli-B1h), VI (Gli-B1d) and VII (Gli-B1a). Allele Gli-B1c (variant VIII) was identical to the alleles from group IV in four of the tests. Some tests might show a fine difference between alleles belonging to the same variant. Our results attest in favor of the independent origin of at least seven variants at the Gli-B1 locus that might originate from deeply diverged genotypes of the donor(s) of the B genome in hexaploid wheat and therefore might be called “heteroallelic”. The donor’s particularities at the Gli-B1 locus might be conserved since that time and decisively contribute to the current high genetic diversity of common wheat.     

Cr(VI) removal from aqueous solution by activated carbon coated with quaternized poly(4-vinylpyridine)

A composite sorbent (GAC-QPVP) was prepared by coating poly(4-vinylpyridine) onto a granular activated carbon, followed by cross-linking and quaternization processes. The sorbent was characterized by scanning electron microscopy, point of zero charge measurement, and BET analysis. Batch experiments with variable pH, ionic strength, and concentrations of Cr(VI), sorbent, and competing anions were conducted to evaluate the selective sorption of Cr(VI) from aqueous solutions. The results showed that Cr(VI) sorption rates could be described by a reversible second-order kinetics, and equilibrium uptake of Cr(VI) increased with decreasing pH, decreasing ionic strength, and increasing sorbent concentration. The estimated maximum equilibrium uptake of chromium was 53.7 mg/g at pH = 2.25, 30.7 mg/g at pH = 3.65, and 18.9 mg/g at pH = 6.03, much higher than the maximum capacity of PVP-coated silica gel, an adsorbent for Cr examined previously. When compared with the untreated granular activated carbon, sorption onto GAC-QPVP resulted in much less Cr(VI) reduction and subsequent release of Cr(III). The effect of phosphate, sulfate, and nitrate was minor on the selective sorption of Cr(VI). An ion exchange model that was linked with aqueous speciation chemistry described Cr(VI) sorption reasonably well as a function of pH, ionic strength, and Cr(VI) concentration. Model simulations suggested that sorbed Cr(VI) was partially reduced to Cr(III) on the sorbent when pH was less than 4. The presence of Cr(III) on the sorbent was confirmed by the X-ray photoelectron spectroscopic analysis. Overall, the study has demonstrated that GAC-QPVP can effectively remove Cr(VI) from aqueous solutions under a wide range of experimental conditions, without significant Cr(III) release associated with the virgin GAC treatment.