Evidence of Oxygen Ferromagnetism in ZnO Based Materials

Discoveries of room‐temperature ferromagnetism (RTFM) in semiconductors hold great promise in future spintronics technologies. Unfortunately, this ferromagnetism remains poorly understood and the debate concerning the nature, carrier‐mediated versus defect‐mediated, of this ferromagnetism in semiconducting oxides is still open. Here, by using X‐ray absorption (XAS) and X‐ray magnetic circular dichroism (XMCD), it is demonstrated that the oxygen ions have a ferromagnetic response in different ZnO‐based compounds showing RTFM behavior: ZnO nanoparticles capped with organic molecules and ZnO/ZnS heterostructures. These results demonstrate the intrinsic occurrence of RTFM in these systems, and point out that it is not related to the metallic cation but it relays on the conduction band of the semiconductor.     

Accelerated Ionic Motion in Amorphous Memristor Oxides for Nonvolatile Memories and Neuromorphic Computing

Memristive devices based on mixed ionic–electronic resistive switches have an enormous potential to replace today's transistor‐based memories and Von Neumann computing architectures thanks to their ability for nonvolatile information storage and neuromorphic computing. It still remains unclear however how ionic carriers are propagated in amorphous oxide films at high local electric fields. By using memristive model devices based on LaFeO₃ with either amorphous or epitaxial nanostructures, we engineer the structural local bonding units and increase the oxygen‐ionic diffusion coefficient by one order of magnitude for the amorphous oxide, affecting the resistive switching operation. We show that only devices based on amorphous LaFeO₃ films reveal memristive behavior due to their increased oxygen vacancy concentration. We achieved stable resistive switching with switching times down to microseconds and confirm that it is predominantly the oxygen‐ionic diffusion character and not electronic defect state changes that modulate the resistive switching device response. Ultimately, these results show that the local arrangement of structural bonding units in amorphous perovskite films at room temperature can be used to largely tune the oxygen vacancy (defect) kinetics for resistive switches (memristors) that are both theoretically challenging to predict and promising for future memory and neuromorphic computing applications.     

Deconvoluting Energy Transport Mechanisms in Metal Halide Perovskites Using CsPbBr3 Nanowires as a Model System

Understanding energy transport in metal halide perovskites is essential to effectively guide further optimization of materials and device designs. However, difficulties to disentangle charge carrier diffusion, photon recycling, and photon transport have led to contradicting reports and uncertainty regarding which mechanism dominates. In this study, monocrystalline CsPbBr₃ nanowires serve as 1D model systems to help unravel the respective contribution of energy transport processes in metal-halide perovskites. Spatially, temporally, and spectrally resolved photoluminescence (PL) microscopy reveals characteristic signatures of each transport mechanism from which a robust model describing the PL signal accounting for carrier diffusion, photon propagation, and photon recycling is developed. For the investigated CsPbBr₃ nanowires, an ambipolar carrier mobility of μ = 35 cm² V⁻¹ s⁻¹ is determined, and is found that charge carrier diffusion dominates the energy transport process over photon recycling. Moreover, the general applicability of the developed model is demonstrated on different perovskite compounds by applying it to data provided in previous related reports, from which clarity is gained as to why conflicting reports exist. These findings, therefore, serve as a useful tool to assist future studies aimed at characterizing energy transport mechanisms in semiconductor nanowires using PL.     

Dynamic modeling of tunable analog integrated filters for a stability study of on-chip automatic tuning loops

Continuous-time filters with automatic tuning loops are nonlinear feedback systems that are potentially unstable. To ensure stability, particularly if the design of the loop controllers is to be improved, the appropriate linear dynamic modeling of the tunable filter, including control inputs, should be attained. This work aims to present a general dynamic modeling of continuous-time analog filters with automatic tuning capability. The general analysis leads to an equivalent small-signal linearized incremental model, from which transfer functions between output variables and control voltages are obtained. Subsequent to the analysis, it is possible to design compensated loops with enhanced stability and dynamic performance. By way of example, the modeling of a particular band-pass CMOS continuous-time analog filter is presented in this paper. Two transfer functions are derived: the transfer function between the output phase shift and the central frequency control voltage, and that between the output amplitude and the quality factor control voltage. These functions are required to properly tune the central frequency and quality factor parameters. This modeling makes it possible to propose an adaptive controller with improved stability and a possible implementation for such a controller. Finally, experimental results are shown for a CMOS 0.8 μm technology.     

Core–Shell Nanoparticle Interface and Wetting Properties

Latex colloids are among the most promising materials for broad thin film applications due to their facile surface functionalization. Yet, the effect of these colloids on chemical film and wetting properties cannot be easily evaluated. At the nanoscale, core–shell particles can deform and coalesce during thermal annealing, yielding fine‐tuned physical properties. Two different core–shell systems (soft and rigid) with identical shells but with chemically different core polymers and core sizes are investigated. The core–shell nanoparticles (NPs) are probed during thermal annealing in order to investigate their behavior as a function of nanostructure size and rigidity. X‐ray scattering allows to follow the re‐arrangement of the NPs and the structural evolution in situ during annealing. Evaluation by real‐space imaging techniques reveals a disappearance of the structural integrity and a loss of NP boundaries. The possibility to fine‐tune the wettability by tuning the core–shell NPs morphology in thin films provides a facile template methodology for repellent surfaces.     

Tunable,Grating-Gated,Graphene-On-Polyimide Terahertz Modulators

An electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth is presented and it is exploited to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal grating used as a gate electrode, with an HfO₂/AlO_x gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. The authors achieve 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9–2.7 THz range. The modulator is then integrated with a multimode THz QCL. By adjusting the modulator operational bandwidth, the authors demonstrate that the graphene modulator can partially compensate the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the operational range, with 98 equidistant optical modes and a spectral coverage ~1.2 THz. This paves the way for applications in the terahertz, such as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and metrological tools for spectroscopy at THz frequencies.     

The choice of strains of Lactobacillus species for the lactic acid fermentation of vegetable juices

 The reasons for using lactic acid bacteria are to make food durable, to improve its taste and to maintain the nutritive, physiological and hygienic value of the fermentation products. Sixteen strains of the genus Lactobacillus were tested on samples of white fresh cabbage and of a sterilized cabbage and carrot juice mixture. After 7 days of lactic acid fermentation at 27  °C or 30  °C, reducing sugars, total acidity, pH value, lactic, citric and acetic acids, ammonia, nitrates and nitrites were measured in the samples. On the basis of the criteria mentioned above three strains were acceptable. These strains reduced the content of nitrates in the original samples. Received: 14 December 1998 / Revised version: 18 March 1999     

A Roadmap for Controlled and Efficient n‐Type Doping of Self‐Assisted GaAs Nanowires Grown by Molecular Beam Epitaxy

N‐type doping of GaAs nanowires has proven to be difficult because the amphoteric character of silicon impurities is enhanced by the nanowire growth mechanism and growth conditions. The controllable growth of n‐type GaAs nanowires with carrier density as high as 10²⁰ electron cm^?3 by self‐assisted molecular beam epitaxy using Te donors is demonstrated here. Carrier density and electron mobility of highly doped nanowires are extracted through a combination of transport measurement and Kelvin probe force microscopy analysis in single‐wire field‐effect devices. Low‐temperature photoluminescence is used to characterize the Te‐doped nanowires over several orders of magnitude of the impurity concentration. The combined use of those techniques allows the precise definition of the growth conditions required for effective Te incorporation.