In vitro effects of urease inhibitors on rate of urea hydrolysis in soils

We studied the effect of urease inhibitors on the urea hydrolysis in some Sundanese soils belonging to the orders of Vertisol and Entisol. The hydrolysis showed a lag period of about 3 days and its rate (Y) per unit time (t) could be described by a two constants exponential equation of the general form Y = K₁t^K ₂. Statistical analysis showed that the intercept K₁ (rate of urea hydrolysis) was significantly affected by soil type rather than treatment. It seems that K₁ is associated with the soils' initial urease activity as it closely correlates with the Michaelis constant (km).The gradient, K₂, being significantly affected by soil type as well as treatment is probably associated with the induced urease activity with time and it, therefore, varied with variations in soils and treatments. Of the so-called urease inhibitors used in this study Ca(OH)₂, p-benzoquinone (PBQ) and orthophosphoric acid (OP) only PBQ reduced urea hydrolysis while the other chemicals have effects possibly related to modifying the soil pH. Inhibitor treated soils had substantial amounts of unacounted for N which was believed to be present, presumably, in the form of carbamate.Contribution from the Department of Biochemistry and Soil Science, Faculty of Agriculture, Shambat, Sudan.     

Edible oil evaluation by room odor tests: A preliminary report

Room odors developed on heating edible fats in open vessels were evaluated and characterized by a 20 member odor panel. Edible fats tested were: special soybean salad and cooking oils, hydrogenated soybean oil and some commercial salad and cooking oils. Factors were investigated that affect reliability and reproducibility of the test and the acuity of the panel members. The effects of fry temperature and size of sample were investigated. The method has been applied to a study of hydrogenated and unhydrogenated soybean oil samples. Presented at the AOCS Meeting, Chicago, September 1970. No. Market. Nutr. Res. Div., ARS, USDA.     

Damage Mechanisms and the Mechanical Properties of a Laminated 0/90 Ceramic/Matrix Composite

The tensile properties of a 0/90 laminated CAS matrix composite reinforced with Nicalon fibers have been measured. Some effects of notches have also been explored. Changes in modulus and permanent strain caused by matrix cracking have been measured and compared with available models. For this comparison, independent measurements have been made of the constituent properties and the residual stress. The ultimate tensile strength has also been measured and compared with a global load-sharing model. It is concluded that lower-bound matrix cracking models provide good predictability of the stresses at which various matrix cracking mechanisms first operate. Also, the ultimate tensile strength is found to be consistent with a global load-sharing model, based on the in situ strength properties of the fibers. Conversely, the evolution of matrix cracks at stresses above the lower bound has yet to be adequately modeled. In addition, a need is identified for improved models relating elastic properties and permanent strains to matrix crack spacing.     

Adhesion of Polyethylene to Copper: Importance of Substrate Topography

In order to get good adhesion between polyethylene and copper previous workers have oxidized the metal in alkaline solution to give a matt black oxide film. In this paper it is shown that the good adhesion obtained is associated with the very rough, fibrous nature of the matt black oxide film. Adhesion rises as the layer develops on the copper. If the fibres are damaged to alter the topography without changing the chemical nature of the substrate, the adhesion falls markedly. If the chemical nature of the oxide film is changed by electrolytic reduction, with minimum change in topography, the adhesion is still substantial. Adhesion to these matt black oxide films is still good if oxidation of the polymer is suppressed either by incorporation of stabilizers or by coating in a nitrogen atmosphere. This further points to the importance of topography in adhesion to these surfaces.     

Long term storage of soybean and cottonseed salad oils

Commercially prepared and packaged soybean and cottonseed salad oils from several different processors were evaluated periodically during storage for 12 months. Partially hydrogenated and winterized soybean oils, as well as unhydrogenated soybean salad oils, were stored in bottles and cans at 78 and 100 F. Control samples of all oils were held at 0 F during the entire test. Some lots in bottles and cans were packaged under nitrogen to improve storage stability. Agreement was good between organoleptic and oxidative evaluation of aged oils. After 26 weeks of storage at 100 F, the flavor of partially hydrogenated-winterized oils packaged under nitrogen showed a minimum loss. These same oils did not exhibit much, if any, reduction in their oxidative stability as indicated by storage peroxide values (active oxygen method). Soybean oil not protected with nitrogen demonstrated progressive flavor deterioration at 100 F. After 10 weeks of storage, the deterioration became marked and the flavor score was below 5. From limited observations, bottled oils appear to have a better stability than oils packaged in screw-cap tin cans. Hydrogenated oils packaged under nitrogen in cans had good oxidative stability, but some lowering of the flavor score was observed. Nonhydrogenated soybean oils packaged in tin cans not under nitrogen exhibited the most rapid flavor deterioration of all lots of oil investigated. Presented in part at the AOCS meeting, New York, October 1968 ARS, USDA     

On the mechanical performance of closed cell Al alloy foams

The mechanical properties of three different commercially available closed cell Al alloys all made by foam casting are examined. The objective is to assess the roles of cell morphology and of imperfections in governing the basic properties: stiffness, yield strength and fracture resistance. This assessment provides goals for manufacturing strategies that enable attainment of good mechanical performance with affordable process technologies. A prevalent role of curves and wiggles in the cell walls on stiffness and strength (anticipated by models) is affirmed by the present measurements. Systematically larger stiffnesses and yield strengths found in tension than in compression are consistent with a prominent role exerted by such imperfections. Moreover, foam casting is apparently capable of cell morphologies that impart properties approaching the best achievable values for an isotropic closed cell solid, devoid of imperfections. There are associated implications for performance and affordability. Fracture measurements indicate crack growth occurring along the cell walls by a mechanism analogous to the plastic tearing of thin sheets. The crack growth resistances are in the range of 1 kJm⁻². This mechanism infers a toughness that scales with the cell wall thickness and its yield strength.     

Computer-aided methods in bespoke breast prosthesis design and fabrication

This case study presents a method of utilizing computer-aided design technologies to provide bespoke, external breast prostheses. The technique is illustrated through a case study of a mastectomy patient. Photogrammetry methods were used to capture the breast form when supported by a brassiere and the unsupported breast and defect side. Computer-aided design techniques were used to generate a digital prosthesis based upon the supported breast shape and with a fitting surface that matched the defect side. Furthermore, a two-part mould was designed and fabricated using rapid prototyping methods. A colour-matched prosthesis was then fabricated in a gel-based, platinum-cured silicone.     

Children and careers in IT

David Evans, BCS government relations, looks at what it couldtake to convince kids that the hard stuff is worth doing.     

Modelling the removal of organic vehicle from ceramic or metal mouldings: The effect of gas permeation on the incidence of defects

A shrinking undegraded core and a porous outer layer result, if the organic vehicle used for shaping ceramic or metal powder mouldings recedes in the interparticle space of the moulded body during pyrolysis. In the present work, a numerical model has been used which simulates the undegraded shrinking core situation and quantifies degradation of the organic vehicle and the diffusion of the resulting products in solution in the organic phase during pyrolysis of a ceramic moulding. This model is extended to include gaseous mass transport in the porous outer layer for a moulding in the shape of an infinite cylinder. The effect of resistance to gaseous mass transport in the porous outer region on defects originating in inner regions was estimated. It is shown that the greatest obstruction to mass transport is diffusion of degradation products in solution in the organic phase. However, the permeability coefficient for gas transport in the outer region begins to affect the critical heating rate required for avoidance of defects only when it is less than 10^–15m².Nomenclature C Concentration,C=C (r, t), based on the total volume of ceramic suspension - d Effective molecular diameter of alphamethylstyrene - D Diffusion coefficient,D=D (C, T) - e Porosity of powder - E Activation energy for thermal degradation - h Remaining weight fraction of polymer - H_vap Enthalphy of vaporization - i Node number - I Pre-exponential constant in Equation 13 - j Time step - K _p Permeability coefficient - K ₀ Specific rate constant - m Mass of monomer displaced - M Mass of one alphamethylstyrene molecule - P Monomer vapour pressure - P _s Monomer vapour pressure at outer surface of the cylinder - P ₁ ⁰ Vapour pressure of monomer over its pure liquid - Q Rate of production of monomer, based on the total volume of ceramic suspension - r Radius of the cylinder - r _j Distance from central axis to the inner surface of the porous layer at time stepj - r ₀ Initial radius of the cylinder - R Universal gas constant - S ₀ Specific surface area of powder per unit solid volume - t Time - T Absolute temperature - T _c Temperature at maximum vapour pressure of monomer and atZ _c - V Volume of monomer - V _c Ceramic volume fraction - V _p Polymer volume fraction - w Mass of monomer stored in the porous annulus - Z Heating rate - Z _c Critical heating rate - ₁ Volume fraction of monomer in the polymer-monomer solution - Viscosity of the monomer vapour - _p Density of the polymer - Polymer-monomer interaction constant